• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.401-406
• /
• 2016

반사파 계측법을 기반으로 활선 상태의 케이블 고장과 위치를 검출할 때, 케이블과 계측 장치사이에 커플러가 사용된다. 이러한 커플러는 케이블에 공급되는 전압으로부터 반사파 계측 기반의 시험 회로의 손상을 예방하게 된다. 또한 케이블에 인가되고 반사되는 송수신 신호의 커플링 통로를 제공한다. 본 논문에는 반사파 계측법을 이용하여 사선과 활선 상태에서 케이블 고장 위치를 검출하는데 사용하기 위한 접촉식 커플러를 설계 및 제작하였다. 제안된 커플러는 유도성 결합 형태로 설계되었고 시뮬레이션을 통해 손실을 계산한 후 제작하였다. 제작한 커플러는 신호 입력에 따른 출력을 측정하여 손실과 주파수 평탄도 실험을 실시하였다. 그 결과 1Mhz 이상의 주파수 대역에서는 신호의 전송 손실이 1.75dB 이하로 측정되었다. 활선 상태에서 케이블 고장과 위치 검출에 적용하기 위해 sequence time domain reflectometry (STDR)과 spread spectrum time domain reflectometry (SSTDR)에 기반한 반사파 계측법 시스템을 구축하여 케이블 고장과 위치 검출 실험을 실시하였다. 그 결과 본 연구에서 제안한 커플러가 활선 케이블 고장 검출을 위한 반사파 계측 장치에 사용될 수 있음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.470-473
• /
• 2000

Because of the continuous growth of energy consumption, and also the tendency to site power lines and pipelines along the same routes, the close proximity of high voltage structures and metallic pipelines has become more and more frequent. Moreover, normal steady state and fault currents become higher as electric networks increase in size and power. Therefore, there has been and still is a growing concern (safety of people marking contact with pipeline, risk of damage to the pipeline coating, the metal and equipment connected to pipeline. especially cathodic protection system) about possible hazards resulting from the influence of high voltage power system on metallic structures(gas pipeline, oil pipeline and water pipeline etc.). Therefore, we analyze the interference problems when the gas pipeline is buried with power cable in the same submarine tunnel. This paper present the results of the study about interference mechanism, AC corrosion, limitation of safety voltage and analysis of indiction voltage.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.263-268
• /
• 2004

In the present study, a Nd;YAG Laser (pulse type) was used to emit ultrasonic signals to a test material. In addition, a total ultrasonic investigation system was designed by adopting a Fabry-Perot interferometer, which receives ultrasonic signals without any contact. For non-destructive test SM45C, which contains some flaws was used as a test material. Because it is easy to align light beam in receiver, and the length of the light beam does not change much even if convex mirror leans towards one side, confocal Fabry-Perot interferometer, which has stable frequency, and PI control are used to correct interfered and unstable signals from temperature, fluctuation and time shift of laser frequency. Stable signals are always obtained by the feedback of PI circuit signals in the confocal Fabry-Perot interferometer. The type, size and position of flaws inside the test material were examined by achieving the stabilization of an interferometer. This study presented a useful method, which could quantitatively investigate the fault of objects by using a Fabry-Perot interferometer.

• 터널과지하공간
• /
• 제5권2호
• /
• pp.114-122
• /
• 1995

The principle and applications of GPR(Ground Penetrating Radear) are familiar to engineering geologists and geophsicists as very attractive technique for continuous high resolution images of the subsurface. However, the main limitation of GPR is obviously related to presence of clayey or silty conductive soils, resulting in complete attenuation of radar signals. This difficulty gives hesitation for the exploration of the deeper targets for example detecting bedrock, particularly in Korean situation that most regions have conductive overburden. In order to prove usefulness of geological survey with GPR in that situation, the technique was tried to investigate depth of bedrock under thick conductive overburden and the other geolocgical informations for the constructionof foundation in the Dongbu apartment site, Kimhae. The reflection patterns on the processed GPR sections are well correlated with the geotechnical units-bedrock, alluvium, landfill unit and their internal layer-boundaries of boring data before GPR survey, except upper contact of bedrock. The isopach maps of the geotechnical units for the 3-D interpretations are made from GPR sections. The maps provided useful geological information that bedrock was distributed as plain and valley with 22~27m depth under alluvium unit (this depth is 5~8 m deeper than drill log) and sedimentary layers subsided and bended along growth fault with NNE strike/15$^{\circ}$SE dip in alluvium unit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.259-262
• /
• 2009

Several universities in Korea are beginning studies related to soft stamping processes but since the studies are done with manual works thus systematic tests can't be performed due to difficulties in producing reproducible and repeatable fine patterns. Therefore, the phenomenon of destruction of the pattern forms of elastic polymers occurred during working because of inconsistent printing pressures and pinting time and there have been difficulties in maintaining flatness or producing uniform and fault-free fine structures in pinting large areas and also, there have been difficulties in multi-layered processes as patterns were changed by contacts in registering and errors in alignments. The purpose of development of this technology is to improve the process of soft lithography so that contacts between PDMS stamps and metal coated substrates in order to develop a stamp printing device that can not only shorten but also optimize processes, secure reproducibility and repeatability and is advantageous in printing large areas. Also, using this technology, this author is to develop equipment technologies and applied technologies for nano grade pattern printing processes with new concepts based on fine contact printing processes in order to apply them to diverse nano pattering processes.

• 자원환경지질
• /
• 제24권3호
• /
• pp.287-299
• /
• 1991

The study area is mainly composed of metasedimentary rocks which are included in Ogchon, Choson and Pyongan Groups. Because of thrust faults which are developed in this area, a coal bearing formation is repeatedly distributed two times, and Choson Group is thrusted over Pyongan Group. Deformation in this area was taken place in a series of three phases ($D_1$, $D_2$ and $D_3$) ; $D_1$ was most intense whereas $D_3$ was weakest. Thrust faults developed in the upper curst duringD2 produced cataclastic rocks and fault breccia,truncating regional slaty cleavage and earlier folds which were formed during $D_1$ stage. The quartz microstructures of metapsammitic rocks in Choson and Pyongan Groups suggest that dislocation creep mechanism predominated early in fabric development, afterwards deformation mechanism was transfered to pressure solution which intensified the earlier fabrics. According to strain analysis using quartz grains and quartz aggregate grains, the strain magnitude(Es) of Pyongan Group represents larger values than that of Choson Group due to the contrast of constituent minerals, the size of original quartz grains and matrix content. Apparent flattening type in strain pattern appears in the whole area. It is suggested that the relationship between Ogchon Group and Choson Group may be thrust contact.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.650-658
• /
• 2017

건물의 접지방식은 사고 발생 시 고장전류를 대지로 안전하게 방전시켜 인체와 기기의 안전성을 확립하기 위한 중요한 요소이다. 특히, 우리나라 아파트단지의 접지방식은 일본의 영향을 받아 TT접지방식으로 설계/시공되고 있지만, 전기안전을 확보하기 위하여 각동의 건물에서 기초 콘크리트 접지를 시설하고, 이들을 서로 연결하여 수변전실의 변압기 2차측 접지까지 연결하고 있다. 이러한 공동구로 연결된 TT접지방식은 TN접지방식에 가까우므로 1선 지락사고시 사고전류의 크기와 대지전압의 크기가 크게 증가하므로, 이를 정확하게 해석하여 사고에 대한 보호대책을 세우는 것이 중요한 과제로 대두되고 있다. 따라서, 본 논문에서는 대규모 아파트단지의 접지특성을 해석하기 위하여, 도면과 현장측정에 의한 사례분석과 PSCAD/EMTDC의 모델링에 의한 접지방식 특성을 분석하여, 대규모 아파트단지의 접지방식(TN접지방식과 TT접지방식)에 대한 정확한 유형을 파악한다. 또한, 공동구 연결유무에 의한 대규모 아파트단지의 접지방식 구조에 따른 사고해석 알고리즘을 제시하고, 사고발생시 접지계통에서의 접촉전압 및 보폭전압을 고려한 접지계통설계 알고리즘을 제안하였다. 본 논문에서 제시한 모델링과 알고리즘을 바탕으로 실 계통의 아파트단지에 적용한 결과, 대규모 아파트단지의 접지특성 해석에 유용함을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.781-789
• /
• 2016

Busbar has been used as electric conductor within extra high voltage (EHV) gas insulated switchgear (GIS), which makes EHV GIS higher security, smaller size and lower cost. However, the main fault of GIS is overheating of busbar connection parts, circuit breaker and isolating switch contact parts, which has been already restricting development of GIS to a large extent. In this study, a coupled magneto-flow-thermal analysis is used to investigate the thermal properties of GIS busbar in steady-state. A three-dimensional (3-D) finite element model (FEM) is built to calculate multiphysics fields including electromagnetic field, flow field and thermal field in steady-state. The influences of current on the magnetic flux density, flow velocity and heat distribution has been investigated. Temperature differences of inner wall and outer wall are investigated for busbar tank and conducting rod. Considering the end effect in the busbar, temperature rise difference is compared between end sections and the middle section. In order to obtain better heat dissipation effect, diameters of conductor and tank are optimized based on temperature rise simulation results. Temperature rise tests have been done to validate the 3-D simulation model, which is observed a good correlation with the simulation results. This study provides technical support for optimized structure of the EHV GIS busbar.

• 자원환경지질
• /
• 제3권4호
• /
• pp.199-222
• /
• 1970

One of the biggest sulfide metallic (Cu, Pb, Zn) ore deposits of South Korea is located in the area of Seo-myeon, Shiheung-gun, Gyeonggi-do. Geology of the region is mostly composed of metasediments of biotite schist, graphite schist, injection gneiss, sericite schist, limesilicate and quartzite from bottom, those are applicable to so-called Yeoncheon System of Pre-Cambrian, and granodiorite, quartz porphyry, basic dykes are outcroped in a small scope as intrusives. The origin of the ore deposit is pyrometasomatic contact deposits due to hydrothermal replacement and the ore bodies are imbedded in lower bed of limesilicate formation as impregnation and ore minerals are galena, sphalerite, marmatite, chalcopyrite, bornite, chalcocite, covellite, and the later two minerals are both hypogene and supergene. Gangue minerals are mostly skarn minerals those hornblende, diopside, epidote, hedenbergite, chlorite, garnet and quartz except primary calcite and quartz. Boundary plane (NS strike) between schists and limesilicate seemed to be primary opening of ore solution and fractures bearing $N50^{\circ}{\sim}80^{\circ}W$ are secondary structural control for localization of ore minerals and the third structural controls are both irregular gashes and schistosity in small scale. Photogeological study was carried with vertical aerial photo scaled 1: 38,000 and enlarged 1 : 10,000 under stereoscope. The study on the area convinced the fact that the geologic boundaries between rocks, limesilicates and quartzites, are traced easily by their typical topographic feature and drainage, and the main fracture patterns which derived from the result of fracture traces, that photogeologic lineament observed under stereoscope, are those bearing (1) $N20^{\circ}W$, (2) $N58^{\circ}W$, (3) $N76^{\circ}W$, (4) EW, (5) $N20^{\circ}W$, (6) $N62^{\circ}W$, (7) $N77^{\circ}W$. Among the written fractures, (5) (not schistosity, in case of fault) (6) (7) are post-mineral faults and others are pre-mineral faults and others are pre-mineral structures, and (2) (3) (6) (7) are coincided with statistical figure of 208 fractures surveyed in underground. By the result of the study, mineralized zone, are presumed to extend north and southward, total length about 4km.

• 항공우주시스템공학회지
• /
• 제11권5호
• /
• pp.28-35
• /
• 2017

자기부상 비접촉식 밸런스(MSBS: Magnetic Suspension and Balance System)는 자기력 및 자기모멘트를 이용하여 기계적 접촉 없이 시험 대상체의 위치 및 자세각을 정밀하게 변경하며 외력을 측정하는 것이 가능하다. MSBS를 활용한 풍동실험의 신뢰도 및 안정성을 확보하기 위해서는 위치 및 자세각 제어시스템의 명령 추종 성능과 구성장비의 고장에 대한 강건성을 높일 필요가 있다. 본 연구에서는 실제 개발된 풍동실험용 MSBS의 시뮬레이션을 통해 Iterative Feedback Tuning (IFT)과 $L_1$ adaptive output feedback 알고리즘을 활용하여 제어 이득값을 자동적으로 최적화하고 전류공급장치의 고장에 강건한 제어시스템을 설계하는 방법의 유효성을 검증하였다.