• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.172-178
• /
• 2020

In this study, the optimization of the biodiesel production process from waste oil using microwave with response surface methodology (RSM) was conducted. The microwave irradiation time and power in addition to the alcohol/oil mole ratio were chosen as process parameters. Also the fatty acid methyl ester (FAME) content (over 96.5%) and kinematic viscosity (1.9~5.5 cSt) were selected as response values. From basic experiments, the range of quantitative factors were set as following; 4~6 min, 400~600 W, and 7~9 for the microwave irradiation time and power, and alcohol/oil molar ratio, respectively. The optimum conditions for the methanolysis were 5.0~5.1 min, 481.3~525.5 W, 7.9~8.4, and 2.0 or 3.0 mg KOH/g for the microwave irradiation time and power, methanol/oil molar ratio, and each acid value, respectively. The FAME content and kinematic viscosity were predicted as 97.49~96.34% and 4.01~4.12 cSt, respectively, under the condition above. Under the optimum experimental conditions, the results showed that the FAME content and kinematic viscosity of 97.82~96.42% and 4.07~4.16 cSt, respectively were measured and the mean error rates were 0.22% and 0.98%, respectively.

• Microbiology and Biotechnology Letters
• /
• v.49 no.3
• /
• pp.391-402
• /
• 2021

Earthworms play an important role in soil fertilization, interacting continually with microorganisms. This study aims to demonstrate the existence of beneficial microorganisms living in the earthworm's immune system, the coelomic fluid. To achieve this goal, a molecular identification technique was performed, using cytochrome c oxidase I (COI) barcoding to identify abundant endogenic earthworms inhabiting the temperate zone of Rabat, Morocco. Then, 16S rDNA and ITS sequencing techniques were adopted for bacteria and fungi, respectively. Biochemical analysis, showed the ability of bacteria to produce characteristic enzymes and utilize substrates. Qualitative screening of plant growth-promoting traits, including nitrogen fixation, phosphate and potassium solubilization, and indole acetic acid (IAA) production, was also performed. The result of mitochondrial COI barcoding allowed the identification of the earthworm species Aporrectodea molleri. Phenotypic and genotypic studies of the sixteen isolated bacteria and the two isolated fungi showed that they belong to the Pseudomonas, Aeromonas, Bacillus, Buttiauxella, Enterobacter, Pantoea, and Raoultella, and the Penicillium genera, respectively. Most of the isolated bacteria in the coelomic fluid showed the ability to produce β-glucosidase, β-glucosaminidase, Glutamyl-β-naphthylamidase, and aminopeptidase enzymes, utilizing substrates like aliphatic thiol, sorbitol, and fatty acid ester. Furthermore, three bacteria were able to fix nitrogen, solubilize phosphate and potassium, and produce IAA. This initial study demonstrated that despite the immune property of earthworms' coelomic fluid, it harbors beneficial microorganisms. Thus, the presence of resistant microorganisms in the earthworm's immune system highlights a possible selection process at the coelomic fluid level.

• Nutrition Research and Practice
• /
• v.17 no.6
• /
• pp.1099-1112
• /
• 2023

BACKGROUND/OBJECTIVES: Dyslipidemia causes metabolic disorders such as atherosclerosis and fatty liver syndrome due to abnormally high blood lipids. Purple perilla frutescens extract (PPE) possesses various bioactive compounds such as α-asarone, chlorogenic acid and rosmarinic acid. This study examined whether PPE and α-asarone improved dyslipidemia-associated inflammation and inhibited atheroma formation in apolipoprotein E (apoE)-deficient mice, an experimental animal model of atherosclerosis. MATERIALS/METHODS: ApoE-deficient mice were fed on high cholesterol-diet (Paigen's diet) and orally administrated with 10-20 mg/kg PPE and α-asarone for 10 wk. RESULTS: The Paigen's diet reduced body weight gain in apoE-deficient mice, which was not restored by PPE or α-asarone. PPE or α-asarone improved the plasma lipid profiles in Paigen's diet-fed apoE-deficient mice, and despite a small increase in high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein (LDL)-cholesterol, and very LDL were significantly reduced. Paigen's diet-induced systemic inflammation was reduced in PPE or α-asarone-treated apoE-deficient mice. Supplying PPE or α-asarone to mice lacking apoE suppressed aorta atherogenesis induced by atherogenic diet. PPE or α-asarone diminished aorta accumulation of CD68- and/or F4/80-positive macrophages induced by atherogenic diet in apoE-deficient mice. Treatment of apoE-deficient mice with PPE and α-asarone resulted in a significant decrease in plasma cholesteryl ester transfer protein level and an increase in lecithin:cholesterol acyltransferase reduced by supply of Paigen's diet. Supplementation of PPE and α-asarone enhanced the transcription of hepatic apoA1 and SR-B1 reduced by Paigen's diet in apoE-deficient mice. CONCLUSIONS: α-Asarone in PPE inhibited inflammation-associated atheroma formation and promoted hepatic HDL-C trafficking in dyslipidemic mice.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.985-994
• /
• 2018

Bio-heavy oil for power generation is a product made by mixing animal fat, vegetable oil and fatty acid methyl ester or its residues and is being used as steam heavy fuel(B-C) for power generation in Korea. However, if the fuel supply system of the fuel pump, the flow pump, the injector, etc., which is transferred to the boiler of the generator due to the composition of the raw material of the bio-heavy oi, causes abrasive wear, it can cause serious damage. Therefore, this study evaluates the fuel characteristics and lubricity properties of various raw materials of bio-heavy oil for power generation, and suggests fuel composition of biofuel for power generation to reduce frictional wear of generator. The average value of lubricity (HFRR abrasion) for bio-heavy oil feedstocks for power generation is $137{\mu}m$, and it varies from $60{\mu}m$ to $214{\mu}m$ depending on the raw materials. The order of lubricity is Oleo pitch> BD pitch> CNSL> Animal fat> RBDPO> PAO> Dark oil> Food waste oil. The average lubricity for the five bio-heavy oil samples is $151{\mu}m$ and the distribution is $101{\mu}m$ to $185{\mu}m$. The order of lubricity is Fuel 1> Fuel 3> Fuel 4> Fuel 2> Fuel 5. Bio-heavy oil samples (average $151{\mu}m$) show lower lubricity than heavy oil C ($128{\mu}m$). It is believed that bio-heavy oil for power generation is composed of fatty acid material, which is lower in paraffin and aromatics content than heavy oil(B-C) and has a low viscosity and high acid value, resulting in inhibition of the formation of lubricating film by acidic component. Therefore, in order to reduce friction and abrasion, it is expected to increase the lubrication of fuel when it contains more than 60% Oleo pitch and BD pitch as raw materials of bio-heavy oil for power generation.

• Clean Technology
• /
• v.30 no.1
• /
• pp.47-54
• /
• 2024

Jatropha oil extracted from the seeds of Nepalese Jatropha curcas, a non-edible crop, was used as a raw material and converted to biodiesel through a two-step process consisting of an esterification reaction and a transesterification reaction. Amberlyst-15 catalyst was applied to the esterification reaction between the free fatty acids contained in the Jatropha oil and methanol. The acid value of the Jatropha oil could be lowered from 11.0 to 0.26 mgKOH/g through esterification. Biodiesel was synthesized through a transesterification reaction between Jatropha oil with an acid value of 0.26 mgKOH/g and methanol over NaOH/γ-Al₂O₃ catalysts. As the loading amount of NaOH increased from 3 to 25 wt%, the specific surface area decreased from 129 to 28 m²/g and the pore volume decreased from 0.249 to 0.129 cm³/g. The amount and intensity of base sites over the NaOH/γ-Al₂O₃ catalysts increased simultaneously with the NaOH loading amount. It was confirmed that the optimal NaOH loading amount for the NaOH/γ-Al₂O₃ catalyst was 12 wt%. The optimal temperature for the transesterification reaction of Jatropha oil using the NaOH/γ-Al₂O₃ catalyst was selected to be 65 ℃. In the transesterification reaction of Jatropha oil using the NaOH/γ-Al₂O₃ catalyst, the reaction rate was affected by external diffusion limitation when the stirring speed was below 150 RPM, however the external diffusion limitation was negligible at higher stirring speeds.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.485-491
• /
• 2011

The present study evaluated the soil microbial communities by fatty acid methyl ester (FAME) in upland soils at 25 sites in Gyeongnam Province. The total bacteria content was $143nmol\;g^{-1}$ for in inclined piedmont, $75nmol\;g^{-1}$ for fan and valley, $49nmol\;g^{-1}$ for hill areas, and $44nmol\;g^{-1}$ for riversider plain. The fungi content was 2.4 times higher in sandy loam than $21nmol\;g^{-1}$ in silt loam (p<0.01). In addition, inclined piedmont soils had a significantly higher ratio of monounsaturated fatty acids to saturated fatty acids compared with fan and valley soils (p<0.05). The communities of total bacteria and arbuscular mycorrhizal fungi in the inclined piedmont soils were significantly higher than those in the fan and valley soils and in the riversider plain soils (p<0.05), whereas the community of fungi was significantly lower (p<0.05). In principal component analyses of soil microbial communities, our findings showed that inclined piedmont was positive relationship with total bacteria and actinomycetes in upland soils.

• Journal of Marine Bioscience and Biotechnology
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2015

Bio diesel has advantages to reduce GHG(Greenhouse Gas) compare with the fossil fuel by using oil comes from plant/animal sources and even waste such as used cook oil. The diversity of energy feeds brings the positive effects to secure the national energy mix. In this circumstance, micro-algae is one of the prospective source, though some technical barriers. We analyzed the bio diesel which was derived from Dunaliella tertiolecta LB999 through the BD100 quality specifications designated by the law. From that result, it is revealed that the oxidation stability is one of the properties to be improved. In order to find the reason for low oxidation stability, we analyzed the oxidation tendency of each FAME components through some methods(EN 14111, EN14112, EN16091). In this study, we could find the higher double bond FAME portion, the more oxidative property(C18:1${\ll}C18:3$) in bio diesel and main unsaturated FAME group is acted as the key component deciding the bio diesel's oxidation stability. It is proved experimentally that C18:3 FAME are oxidized easily under the modified accelerated oxidation test. We also figure out low molecular weight hydrocarbon and FAME were founded as a result of thermal degradation. Some alcohol and aldehydes were also made by FAME oxidation. In conclusion, it is necessary to find the way to improve the micro-algal bio diesel's oxidation stability.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.460-466
• /
• 2015

An isotope dilution liquid chromatography tandem mass spectrometry was developed as a primary method for the quantitative analysis of cholesterol in infant formula. Cholesterol-d₄ was used as an internal standard and spiked into the infant formula sample. In order to release cholesterol out of cholesteryl ester, which is cholesterol bound to fatty acids in infant formula, saponification was carried out. Saponification conditions were optimized with heating temperature, reaction time and the concentration of KOH. The optimum conditions were as follows; heating temperature was 70 ℃, reaction time was 180 min and the concentration of KOH was 0.8 mL of 8 M KOH for about 0.1 g infant formula sample. Extraction of cholesterol out of sample solution was carried out with hexane uisng liquid-liquid extraction. Chromatographic analysis was carried out using Phenomenex Kinetex C₁₈ column. Mobile phase was 0.1% acetic acid in methanol/water (v/v, 99/1) and flow rate was 0.3 mL/min. Cholesterol and cholesterol-d₄ were monitored at mass transfer m/z 369/259 and 373/263 respectively. Reproducibility of the method was evaluated to be 0.23% of the measurement result. The expanded uncertainty of the measurement result of cholesterol in infant formula was approximately 1.9% at a 95% confidence level. NIST standard reference material having certified values of cholesterol in infant formula, was analyzed in order to verify this method. The ID-LC/MS/MS results were well agreed with the certified values of NIST SRM within the uncertainty.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.135-140
• /
• 1998

The constituents of deposits on paper machine and holes/spots in paper have been analyzed by a combination of analytical techniques, such as FTIR, Py-GC-MS, and EDS. FTIR spectroscopy was used prior to Py-GC-MS and EDS analysis, as a preliminary analysis. The analysis of organic components was carried out with a pyrolysis unit connected to a GC-MS, and inorganic components in ash were analyzed by SEM equipped with an EDS analyzer after pyrolysis at $590^{\circ}C$. The deposits on the dryer section were complex pitch, which was the mixture of the organic components of fatty acid ester and starch, and the inorganic components of talc, clay, and calcium carbonate. The complex pitch was estimated to come from the coated broke. We knew the deposits on the metering rod of sym-sizer were associated with the interaction of unstable alkyl keten dimer(AKD) and $CaCO_3$. The compositions of holes or spots varied considerably and were associated with chemical interaction within the system. The holes, spots, and blotches in the finished paper were PE and PP from pulp sources, complex pitch that were caused by the interaction of the different additives in the system, polymer such as flexible PVC that was used for the prop of palette, and hot melt as adhesives that came from the inadequate handling of broke. In addition, we identified that poly(caprolactam) which is used for forming fabrics or press felts, could be mixed with the raw materials by accident and results in streaks on coating.

• Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.218-222
• /
• 1999

The effects of storage temperature, moisture content and the concentration of additives, such as sucrose fatty acid ester(SE), isomaltooligosaccharide(IO) and glycerin(GL), on texture properties, hardness(HA), cohesiveness(CO) and chewiness(CH) of Baikseolgi after 7 days storage were analyzed by response surface methodology(RSM). The contour values of HA of SE added Baikseolgi at 20, 50 and $80^{\circ}C$ of storage temperate were $1500{\sim}3200,\;500{\sim}1300$ and $100{\sim}400\;g_f$, respectively. The HA of IO or GL added Baikseolgi decreased with increased storage temperature, moisture content and additive concentration. The storage temperature was the most significant factor affecting the HA of Baikseolgi. However, the second and third significant factors were moisture content and additive concentration, respectively. These results imply that the control of storage temperature is the most effective method to increase the storage stability of Baikseolgi. The CO of IO or GL added Baikseolgi was increased by the change of strage temperature from $20{\circ}\;to\;50{\circ}$. While, there was no significant difference between $50{\circ}\;and\;80{\circ}$ of storage temperature. The CO of IO or GL added Baikseolgi was maximized around 40% of moisture content and that of GL added Baikseolgi was minimized around 0.5% of GL concentration. The storage temperature, additive concentration and moisture content were the first, second and third affacing factors on the CO of Baikseolgi, respectively. The CH of Baikeolgi was decreased by increasing storage temperature, moisture content and additive concentration. The storage temperature, moisture content and additive concentration were the first, second and third affacting factors on the CH of Baikseolgi, respectively.