• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.61-71
• /
• 2014

PURPOSES : The first generation of wide base tires introduced in the early 1980s was found to cause a significant increase in pavement damage compared to dual-tire assemblies. However, wide base tires have evolved considerably, and a new generation of wide base tire is thought to be comparable to conventional dual tires for pavement damage. A challenge associated with using wide base tires is the accurate quantification of pavement damage induced by these tires. The objective of this study was to investigate the responses of flexible pavement to continuously moving vehicular loading under various tire configurations. METHODS : The comparison of the strain/stress responses of full-depth pavement caused by conventional dual tire assembly and new generation of wide-base tires was performed. The FE model incorporates linear viscoelasticity of asphalt material and continuous moving load using implicit dynamic analysis. RESULTS AND CONCLUSIONS : The result demonstrates that the new wide-base tires caused slightly more fatigue damage and less primary rutting damage in HMA layer than a dual-tire assembly, but caused more secondary rutting damage in subgrade than a dual tire assembly.

• Journal of Korean Academy of Nursing
• /
• v.35 no.1
• /
• pp.87-94
• /
• 2005

Purpose: The purpose of this research was to provide basic data in the control of depression found in patients with fibromyalgia by analysing the main factors that affect them. Method: The subjects were 207 out-patients in three university medical centers diagnosed with fibromyalgia according to the conditions by American College of Rheumatology (1990). Depression was measured by the CES-D Scale. Dependant variables, such as stress and anxiety were measured by the VAS Scale and physical activity was measured using 10(4-point-scale) questions developed by the researcher. The number of tender points was converted to scores based on the criteria of the ACR(1990) and of Yunus. Self-efficacy was measured by the Self-Efficacy Scale developed by Lorig et al. (1989) for arthritis patients. Result: The main factors that affect depression of patients with fibromyalgia were self-efficacy, anxiety, physical activity, tender points fatigue, and family support, which explained 49% of the depression. Conclusion: It has been confirmed that the regression equation model of this research may serve as a predictor of depression in patients with fibromyalgia.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.10a
• /
• pp.160-166
• /
• 1994

In general, the problems of strengthening and repairing of deteriorated or damaged reinforced concrete members are usually worked out in situ by externally bounding steel plates using epoxy resins, which has been recognized to be one of effective and convenient methods. But the disadvantages of strengthening/repairing concrete members with externally bonded steel plates include ; (a) deterioration of the bond at the steel-concrete interface caused by the corrosion of steel ; (b) difficulty in manipulating the plate at the construction site ; (c) improper formation of joints, due to the limited delivery lengths of the steel plates ; and etc. Therefore these difficulties eventually have led to the concept of replacing the steel plates by fiber-reinforced composite sheets which are characterized by their light weight, extremely high stiffness, excellent fatigue properties, and outstanding corrosion resistance. In the paper, for the reliability assessment of reinforced concrete beams externally strengthened by carbon fiber plastic(CFRP) laminates, an attempt is made to suggest a limit state model based on the strain compatibility method and the concept of fracture mechanics. And the reliability of the proposed models is evaluated by using the AFOSM method. The load carrying capacity of the deteriorated and/or damaged RC beams is considerably increased. Thus, it may be stated that the post-strengthening of concrete beams with externally bonded CFRP materials may be one of very effective way of increasing the load carrying capacity and stiffeness characteristics of existing structures.

• Preventive Nutrition and Food Science
• /
• v.22 no.3
• /
• pp.241-245
• /
• 2017

Aged garlic has been reported to possess beneficial pharmacological activities, including anti-stress and anti-fatigue properties, and to exert protective effects on the cardiovascular system and liver. Pine needles are widely used in folk medicine and as food additives owing to their pharmacological properties such as anti-aging and anti-inflammatory effects. It has long been known that combining certain phytochemicals with other phenols or organic acids can produce synergistic effects. Therefore, the purpose of this study was to develop an optimal formula of aged garlic with added pine needle powder for improved antioxidant activity using the statistical technique of response surface methodology. The antioxidant activities of aged garlic mixed with pine needle powder were confirmed by measuring oxygen radical absorbance capacity and total polyphenol content. An optimized antioxidant formula was identified that contained 5.08 g aged garlic and 1.97 g pine needle powder. The antioxidant activities of the mixture prepared using this optimal formula were significantly higher than the predicted values according to an additive model. Hence, this study confirms that the addition of pine needle powder to aged garlic can improve its antioxidant activity. This study demonstrated an optimal mixing ratio to produce an aged garlic product with improved functionality through the addition of pine needle powder that could be successfully employed by the food industry to prepare functional foods.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.4
• /
• pp.72-78
• /
• 2010

Textile machinery affects various industry, such as sport leisure industry, metal and chemistry material, electric electron, mechanical energy, packing and printing industry. In case of design of textile machine, the very important fact is absorbing the minute vibration induced by spinning thread and insert which is the part of spindle plays a role of reduction of impact caused by oscillation of thread bobbin. Therefore, Optimal design was executed by design of experiments and kriging optimal design methods to prevent fracture of spindle insert under the fatigue condition and deduced the best value of design parameter to improve the stability of the products. The highest sensitivity is showed at the design parameter A and D. As the spiral number of insert is increase, tension force applied its edge is distributed at whole model and the stress concentration is reduced.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.71-84
• /
• 1992

Polymer-Impregnated Concrete(PIC) is a composite material of concrete and polymer. PIC has superior properties compared to conventional cement concrete, such as strength, stiffness, toughness, durability, water-proofing, chemical resistance. However, the usage of PIC has been limited to repairing materials and non-structural applications due to the lack of the design criteria and the analytical model to determine structural behavior. The objective of this study is experimentally to develop the optimum mixing proportions of polymer impregnants and the stress-strain responses, the strength characteristics, the fatigue and creep behaviors, and the durabilities of MMA(methyl methacrylate)-based PIC.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.2
• /
• pp.261-278
• /
• 1998

The paper represented the lower extremity muscle model as four rigid-body segments: trunk, shank, and foot. We transformed their tibial data into our shank data by rotating their tibial X and Y axes by 5.483 degrees, so the revised coordinate data used to translating the origin of their tibial reference frame to our shank reference frame. According to weight of subject, physiological cross-setional area(PCSA) of each lower extremity muscle was calculated by scaling those data by Brand. The objectives of this paper are to investigate the variations of the recruitment patterns of the lower extremity muscles, and to analyze the changes of the role assigned to each muscle during the seated foot operation. For exertion levels, the transition point of type F motor unit of each muscle is inferred by analyzing the electromyogram at the seated postures. Also, for predetermined seated foot operations exertion levels, the recruitment pattern and the changes of the role assigned are identified in the continuous exertion, by analyzing the electromyogram changes due to the accumulated muscle fatigue. This study can be used to design and to assess the pedals and foot-related equipments design.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.59.2-59.2
• /
• 2011

Although there are many activities on the construction of wind farm to produce amount of power from the wind, in practice power productions are not as much as its expected capabilities. This is because a lack of both the prediction of wind resources and the aerodynamic analysis on turbines with far wake effects. In far wake region, there are velocity deficits and increases of the turbulence intensity which lead to the power losses of the next turbine and the increases of dynamic loadings which could reduce system's life. The analysis on power losses and the increases of fatigue loadings in the wind farm is needed to prevent these unwanted consequences. Therefore, in this study velocity deficits have been predicted and aerodynamic analysis on turbines in the far wake is carried out from these velocity profiles. Ainslie's eddy viscosity wake model is adopted to determine a wake velocity and aerodynamic analysis on wind turbines is predicted by the numerical methods such as blade element momentum theory(BEMT) and vortex lattice method(VLM). The results show that velocity recovery is more rapid in the wake region with higher turbulence intensity. Since the velocity deficit is larger when the turbine has higher thrust coefficient, there is a huge aerodynamic power loss at the downstream turbine.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.10
• /
• pp.749-757
• /
• 2002

Excessive vibration in flexible structures is a problem encountered in many different fields, causing fatigue of structural components. Passive techniques, though sometimes limited in their capabilities, have been used in the past to attenuate vibrations. Recently active techniques have been developed to enhance vibration control performance beyond that provided by their passive counterparts. Most often, the focus of active control methods has been to suppress structure displacements. In cases where vibration results in structure failures, displacement suppression may not be the best choice of control approaches (it can, in fact, increase dynamic loads which would be even more harmful to supports) . This paper presents two optimal control methods for attenuating steady state vibrations in flexible structures. One method minimizes shaft displacements while another minimizes dynamic reaction forces. The two methods are applied to a model of a typical flexible structure system and their results are compared. It is found that displacement minimization can increase loads, while load minimization decreases loads.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.3
• /
• pp.292-301
• /
• 2008

A linearized model for hysteretic acoustic nonlinearity of imperfectly joined interface is proposed and analyzed by using Coulomb damping to investigate the characteristics of the reflection and transmission coefficients for harmonic waves at the contact interface. Closed crack is modeled as non welded interface that has nonlinear discontinuity condition in displacement across its boundary. Based on the hysteretic contact stiffness of the contact interface, the reflected and transmitted waves are determined by deriving the tractions on both sides of the interface in terms of the discontinuous displacements across the interface. It is found that the amplitudes of the reflected and transmitted waves are dependent on the frequency and the hysteretic stiffness. As the frequency of the incident wave increases, the higher reflection and lower transmission are obtained. It also shows that the hysteresis of the interface increases the reflection coefficient, but reduces the transmission coefficient. A fatigue crack is also made in aluminum specimen to demonstrate these characteristics of the reflection and transmission of contact interfaces.