• 방사선산업학회지
• /
• 제10권4호
• /
• pp.249-255
• /
• 2016

This study, Seoul City shelter, you are trying to seek medical cooperation and cure rate increase proposal Yu findings's current situation and tuberculosis of homeless tuberculosis. Inspector, and has a total 591 people is targeted to implement an interview after acquiring utilization agreement in studies conducted chest X-ray photography. Of the interview questions, three or more protons, it is determined that the TB symptomatic conducted sputum examination, chest X-ray examination confirms the physician radiology, when sputum examination primarily chromatic findings the double implemented and conducted by requesting the ship inspection also said inspection sputum acid-fast bacteria if it is true one, respectively. confirmed case result of checking whether there is a difference due to risk factors(Jb) at the chi square black, it was found that there is no statistically significant difference at 95% confidence level. (${\chi}^2=0.276$, p>0.05), suspected case (Ac, Ae) results of examining whether there is a difference due to risk factors in chi square black, that there is a statistically significant difference at 99% confidence level is I found (${\chi}^2=9.414$, p<0.01). The nature of the homeless tuberculosis screening and directed to the distance homeless specific location are likely to evaluate the actual incidence low and aggressive or management needs, the rationale is allowed insufficient reality is. Through this research, future, for tuberculosis high risk tuberculosis patient, such as homeless to expand the tuberculosis screening of infectious tuberculosis patients in private medical institutions, and one-stop service that chest X-ray examination and sputum examination is carried out at the same time introduced immediately to prevent the inspection and examination, cure, and should establish a foundation that can be up to post administration.

• 한국추진공학회지
• /
• 제21권1호
• /
• pp.8-16
• /
• 2017

고체 추진기관이 노즐마개에 의해 외기와의 교환이 완벽히 차단된다면, 구조적 안정성은 제작초기 조건인 내부조성간의 잔류반응(Post Cure, Migration etc.), 그리고 자유공간 내의 산소(또는 산화방지제)와 습기(제습제)와의 반응에 종속된다. 이로부터 발생하는 혼합형 고체추진제의 기계적 특성은 매우 복잡하며, 추진기관은 발사직전까지 일교차/년교차의 끊임없는 열하중을 받게 된다. 본 연구에서는 고체 추진기관의 제조공정인 성형오븐에서 출고 후 저장안정화까지의 거동을 고체추진제의 열유변학적 단순특성을 적용하여 신속하게 산출할 수 있는 방법을 제시하였다. 이를 위해 온도제어 가능한 Endurance Test 장치를 고안 제작하였으며, 추가적으로 점진적 응력과 변형율 증가에 따른 비선형 특성도 검토한다.

• Elastomers and Composites
• /
• 제37권4호
• /
• pp.217-223
• /
• 2002

실리카로 보강된 고무 배합물은 카본 블랙으로 보강된 배합물에 비해 보강제의 분산이 나쁘고 느린 가황 특성을 보인다. 보강제의 분산을 향상시키고 가황 특성을 빠르게 하기 위해 일반적으로 실리카로 보강된 고무 배합물에서는 실란커플링제인 bis-(3-(triethoxysilyl)-propyl)-tetrasulfide (TESPT)와 diphenylguanidine (DPG)를 사용한다. Acrylonitrile-butadiene rubber (NBR)은 실리카로 보강된 styrene-butadiene rubber (SBR) 배합물에서 실리카의 분산을 향상시킨다. 이 연구에서는 실리카로 보강된 SBR 배합물의 특성에 NBR이 미치는 영향에 대해 조사하였다. NBR을 포함하고 있으나 TESPT의 양이 적거나 DPG를 포함하지 않은 배합물(배합물 A)의 특성과 NBR은 포함하지 않고 TESPT와 DPG를 포함하는 배합물(배합물 B)의 특성을 비교하였다. 배합물 A의 스코치 시간은 배합물 B의 것에 비해 빨랐고 모듈러스와 인장 강도는 배합물 B에 비해 약간 떨어지는 경향을 보였다. 마찰 특성은 배합물 A의 것이 배합물 B의 것에 비해 우수하게 나타났다. NBR의 사용으로 TESPT와 DPG의 사용을 줄일 수 있었다.

• 한국게임학회 논문지
• /
• 제16권2호
• /
• pp.129-138
• /
• 2016

최근 급변하는 우리 사회와 환경요소들로 인하여 보살핌을 필요로 하는 아동의 수가 증가 하고 있다. 이 중 불우하고 빈곤한 가정에 속하는 아동들은 경계선 지능 아동으로 이어지는 경우가 대다수이며 이를 예방하기 위한 시급한 조치가 필요한 실정이다. 본 연구는 경계선 지능 아동이 발생하는 원인을 규명하여 이를 예방하고 치료할 수 있는 하나의 해결방안으로 기능성 게임을 구현했다. 해당 게임은 경계선 지능 아동의 취약한 기억력, 집중력, 판단력 향상을 목표로 제작하였으며 관련분야 전문가와 일반인 30명 대상으로 자문 및 실험하여 효과성이 있음을 확인하였다.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.350-359
• /
• 2017

This paper presents a new holistic development approach for the carbon continuous-fiber composite frame of an automotive sunroof assembly. The original steel frame has been designed to get higher bending stiffness with its corrugated cross-sectional shape. The new approach uses the prepregs of a fast cure epoxy and PCM manufacturing processing. For higher productivity, the new frames feature a very simple plat cross sectional shape but achieve high bending stiffness through the laminate design. The sandwich structure with a PET foam core was presented. The frames were made of carbon UD laminae covered single carbon fabric on the outer surfaces. The fabrics provide torsional stiffness and also hold the carbon UD fibers floating in the low viscous epoxy resin of prepregs at the curing temperature during processing. The final product yields approximately 18 % savings in weight compared with the original.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.710-717
• /
• 2015

Projection stereolithography is an additive manufacturing method that uses beam projection to cure the photo-reactive resin used. The light source of a cross-section layer-form illuminates photo-curable resin for building a three-dimensional (3D) model. This method has high accuracy and a fast molding speed because the processing unit is a face instead of a dot. This study describes a Scalable Projection Stereolithography 3D Printing System for improving the accuracy of the stereolithography. In a conventional projection 3D printer, when printing a small sized model, many pixels are not used in the projection or curing. The proposed system solves this problem through an optical adjustment, and keeps using the original image as possible as filling the whole projection area. The experimental verification shows that the proposed system can maintain the highest level of precision regardless of the output size.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.81-86
• /
• 2017

The high-pressure resin transfer molding (HP-RTM) process has a very effective for the mass production of carbon fiber reinforced plastic (CFRP) for light weight in the automotive industry. In developing robust equipment, new process and fast cure matrix systems reduces significantly the cycle time less than 5 minutes in recent years. This paper describes the cavity pressure, temperature and molding characteristics of the HP-RTM process. The HP-RTM mold was equipped with two cavity pressure sensors and three temperature sensors. The cavity pressure characteristics of the HP-RTM injection, pressurization, and curing processes were studied. This experiment was conducted with selected process parameters such as mold cap size, maximum press force, and injection volume. Consequently, this monitoring method provides correlations between the selected process parameters and final forming characteristics in this work.

• 한국염색가공학회지
• /
• 제17권6호
• /
• pp.27-35
• /
• 2005

Conventional pad- dry-cure(thermo-fixation) process usually produces functional performance on both sides of a fabric. UV curing technique was applied to impart water- and oil-repellent finish effective only on the face of a PET knitted fabric. The preferential one-side coating, by virtue of the limited penetration of UV light, was achieved by W curing after padding of a fluorocarbon agent without special coating or printing equipments. The difference in the functional property of face and back sides was examined by measuring water and oil repellency at each side of the treated fabric. The influence of pre/post-irradiation dose and agent concentration on the performance of the finished fabrics were investigated. While increase in both resin concentration and post-irradiation did not have significant effect on the finish, UV pre-irradiation of PET fabrics caused remarkable influence presumably due to appropriate surface modification of PET fabrics required for facile wetting of the resin. The dimensional stability and color change of the UV cured fabrics measured by FAST and reflectance spectrophotometry showed significantly decreased color difference and increased percent extension compared with the samples pre-irradiated without agent application.

• 한국식품위생안전성학회지
• /
• 제27권4호
• /
• pp.325-331
• /
• 2012

Food allergy refers to an immunologically mediated adverse reaction to food, mainly to proteinaceous constituents. Health implications vary between those individuals who experience mild physical discomforts to those with fast-acting, life-threatening anaphylactic reactions. The prevalence of food allergy is higher in children than in adults, estimated around 4-8% and 1-2% respectively in developed countries. Food allergy has no effective cure at the present time and total avoidance of causative foods is the most reliable prophylactic method currently recommended by the medical community. To help food allergic patients to make informed choices of their foods, mandatory labeling of selected food allergens has been introduced in several countries. All food allergen labelling provisions specify a set of allergens common to the regulated countries. Policy divergence, however, exists between countries by inclusion of additional allergens unique to specific countries and enforcement of specific labelling requirements. Such variations in food allergen labelling regulations make it difficult to manage allergen labeling in imported pre-packaged food products. This paper addresses two current issues in food allergen regulation: 1) an urgent need to determine true prevalence of food allergy in the Asia-Pacific region. This will enable refinement to the food allergen regulation to be more country-specific rather than simply adopting CODEX recommendations. 2) There is an urgent need for harmonization of food allergen regulation in order to prevent food allergen regulation becoming a trade barrier.

• 보존과학회지
• /
• 제28권3호
• /
• pp.265-276
• /
• 2012

석조문화재의 보존 복원 작업에 적용할 수 있는 에폭시 수지의 성능을 개선하기 위해 다양한 성분을 조합하여 경화 거동을 제어할 수 있는 접착 시스템을 연구하였다. 사용된 에폭시 수지 주제는 hydrogenated Bisphenol-A (HBA), 경화제로 속경화형 경화제 FH와 저속 경화제 SH를 구성하였으며, 반응성 희석제는 difunctional polyglycidyl epoxide (DPE), 무기 첨가물은 탈크를 사용하였다. 에폭시 수지와 경화제의 혼합 조건에 따라 경화 시 점도, 온도 및 differental scanning calorimetry(DSC)를 이용하여 경화 동력학을 측정하였고, 기계적 특성을 확인하기 위해 무기 첨가물의 함량에 따른 굴곡강도, 인장강도, 압축전단접착강도를 측정하였다. 연구 결과, 다양한 석조문화재의 보존처리 작업에 맞춰 에폭시 수지 구성물의 성분 조합을 통해 경화 특성을 제어하고, 무기 첨가물의 도입을 통해 기계적 특성을 조절하여 성능 개선 및 작업 효율성을 향상 시킨 새로운 접착 시스템을 개발하였다.