• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.118-122
• /
• 2010

The interest in textile which has far-infrared ray emissive property has been increased in the field of biophysics and medicine. In this study, far-infrared ray emissive polyurethane nano-web was obtained using electrospinning of polyurethane(PU) solution mixed with ceramics powder and far-infrared ray emissive properties of nano-web were evaluated by measuring far-infrared ray emission power and emissivity(%). To investigate the influence of concentration of ceramics powder in PU solution and temperature for far-infrared ray emissive properties, far-infrared ray emissivity was measured at varied temperature using various nano-web including varied concentration of ceramics powder. Polyurethane nano-web was characterized by SEM to observe the deposition of ceramics powder on polyurethane nano-web surface. The far-infrared ray emissivity was increased with the concentration of ceramics powder in the nano-web. The far-infrared ray emission power was enhanced with increasing temperature of the samples; however, far-infrared ray emissivity was decreased with increasing temperature because the increase of emission power of ceramic containing nano-web was lower than the emission power of black body one.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.106-112
• /
• 2016

This study investigated electrical properties and far-infrared ray emission according to the carbonizing temperature and phenol-formaldehyde (PF) resin impregnation ratio of ceramics manufactured using sawdust and rice husk. The far-infrared ray emission values and emission energy values decreased as the carbonizing temperature increased. The far-infrared ray emission values of the ceramics manufactured using a carbonizing process at $600^{\circ}C$ and a board with a PF resin impregnation ratio of 60 percent was 0.930; the emission energy presented the highest value of $4.32{\times}10w/m^2$. The electric resistance decreased as the carbonizing temperature increased. For the increase in the carbonizing temperature above $1200^{\circ}C$, ceramics was very close to a conductor due to the small resistance. The power consumption increased by the decrease of electric resistance and increase of the electric current in the case of a higher resin impregnation ratio.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.2
• /
• pp.104-112
• /
• 2022

Indoor air quality is a very important environmental factor in modern society. However, air pollutants generated from various interior construction materials significantly affect the human body, including formaldehyde (HCHO) and volatile organic compounds that threaten public health by deteriorating indoor air quality. Effective in removing these harmful substances are porous materials, such as woodceramics. In this study, charcoal, a porous material, was added to rice husk, an agricultural by-product, and sawdust generated during the sawing process to prepare boards and ceramics at different mixing ratios, and the HCHO deodorization performance and far-infrared emission characteristics were measured. As the mixing ratio of charcoal increased, the deodorization rate of the boards and ceramics tended to increase. Overall, the deodorization rate was measured to be 80% to 90%, indicating that the boards and ceramics prepared with charcoal are suitable to be used for the purpose of deodorization. The effect of the material mixing ratio on far-infrared emissivity and emission power was insignificant.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.597-603
• /
• 2006

In order to study the effects of $GeO_{2}$ contents in $XSiO_{2}{\cdot}YGeO_{2}$ and $XSiO_{2}{\cdot}YNa_{2}O{\cdot}ZGeO_{2}$ compounds on far infrared ray radiation, we investigated the sample of $XSiO_{2}{\cdot}YGeO_{2}$ and $XSiO_{2}{\cdot}YNa_{2}O{\cdot}ZGeO_{2}$ using TG-DTA, XRD, FT-IR spectrophotometer and FT-IR spectrometer. The far infrared ray emissivity and emission power were increased with the increase of $GeO_{2}$ contents in $XSiO_{2}{\cdot}YGeO_{2}$ and $XSiO_{2}{\cdot}YNa_{2}O{\cdot}ZGeO_{2}$ compounds. The far infrared ray emissivity and emission power of $XSiO_2{\cdot}YGeO_2$ compounds were higher than those of $XSiO_{2}{\cdot}YNa_{2}O{\cdot}ZGeO_{2}$ compounds.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.480-489
• /
• 2010

We investigated the functional characteristics of commercial wood charcoal in Korea and their application as functional raw materials. The areas of analysis were anatomical features, elementary composition, mineral composition, caloric values, anion and far-infrared ray emission, and moisture absorption capacity. Based on the analyses as above mentioned, it is considered that charcoal can be evaluated as functional raw material. In commercial wood charcoal in Korea, there were highly varied depending on manufacturing methods as black charcoal, white charcoal and mechanical charcoal and manufactures for elementary composition, mineral composition, anion emission, far infrared ray emission. Especially, black charcoal showed lower moisture absorption capacity than white charcoal and mechanical charcoal. For charcoal as functional raw material, selective usage are needed based on the analyses of anatomical features, elementary composition, mineral composition, caloric values, anion and far-infrared ray emission, and moisture absorption capacity. Specific charcoal making methods for improving specific functionality, required as functional raw material, are necessary in further research.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.223-230
• /
• 2014

This study examined emission characteristics of far-infrared ray, formaldehyde, volatile organic compounds and deodorization rate of particleboard prepared at different target board densities and resin content levels, using the xylem part of Broussonetia Kazinoki Sieb. The deodorization rate increased, as the target density of board and resin content increased. Emission rates of the far-infrared ray and total volatile organic compounds (TVOCs) were 0.892~0.899, and $0.074mg/m^2{\cdot}h$ for particleboard prepared with the resin content of 13% and target density of $0.6g/cm^3$ while the deodorization rate was 80~90% for the same particleboard. The formaldehyde emission factor ranged from $0.004mg/m^2{\cdot}h$ to $0.006mg/m^2{\cdot}h$ for all particleboard fabricated at different resin content and target densities. These results indicate that particleboard prepared from the xylem part of Broussonetia Kazinoki Sieb have a potential as a building construction material.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.34.3-35
• /
• 2015

Recent high-resolution infrared space missions have revealed supernova remnants (SNRs) of diverse morphology in far infrared (FIR), often very different from their X-ray appearance. This suggests that the FIR emission from SNRs could be of different origins. For a sample of 20 Galactic SNRs, we examine the correlation between their FIR and X-ray properties and explore the origin of the FIR emission. We find that the SNRs with very different FIR and X-ray morphology have relatively large infrared-to-X-ray (IRX) flux ratios. We argue that the FIR emission in these SNRs is likely mainly from dust grains radiatively-heated by shock radiation. For SNRs with similar IR and X-ray morphology, the FIR emission of which is probably mostly from dust grains collisionally heated by hot plasma, we compare their IRX flux ratios with theoretical ratios from a model incorporating time-dependent dust destruction and non-equilibrium ionization cooling behind SNR shock, and discuss the implications of our result.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.279-283
• /
• 2008

Blood soil and the mixture of blood soil, elvan soil and, silica soil materials were molded, then they were sintered in $1100^{\circ}C$ and were used for the emission of the far infrared ray boll. The emission from the manufactured bolls was relatively high in the range of $8{\sim}12{\mu}m$ wavelength each. The elution of minerals from mixture bolls was very low, but the elimination of heavy metal cadmium ion in activated water and energy water treated with mixture bolls was very high. Activated water and energy water had a high to the UV protected ability in comparison to drinking water.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.47-52
• /
• 2008

The far-infrared ray (FIR) has been applied to various fields such as medical therapy, kitchen utensils, bath supplies, and so on. The FIR-emitting agent was used to make functional paperboards to have freshness-maintaining ability. The FIR-emitting agent was diluted with different concentrations at 0.5% starch solution, and the FIR-emitting solutions were coated on paperboards, i.e., liner. The more the concentration of the FIR radiating agent increased at 0.5% cationic starch solution, the higher FIR emissivity and emission power of paperboards increased. The corrugated boxes made of paperboards coated by the FIR-radiating agents at over 5% dilution concentration endowed mandarin oranges in the boxes with greater antimicrobial activity than those in boxes made of paperboards coated by the agent at below 5% concentration. In addition, it was ascertained that treatment of the FIR agents rarely affected strength properties of paperboards.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.53-53
• /
• 2013

We present preliminary results of far-infrared(FIR) study of the supernova remnant(SNR)s in the Large Magellanic Cloud using the Herschel HERITAGE (HERschel Inventory of The Agents of Galaxy Evolution) data set. HERITAGE provides FIR data covering the entire LMC at 100,160, 250, 350, and 500 um. In order to confirm FIR emission associated with SNRs, we refer to Magellanic Cloud Emission-Line Survey (MCELS) H-alpha & SII data, Spitzer surveying the Agents of a Galaxy's Evolution (SAGE) Multiband Imaging Photometer (MIPS) 24um & 70um data, Chandra Supernova Remnants Catalog, and ATCA 4.8GHz continuum images of Dickel et al. (2005). Among 47 SNRs in the LMC, 7 SNRs show associated FIR emission. We present multi-wavelength view of 5 SNRs; DEM L249, N49, N63A, N132D, and the SNR in N4. N49 and N132D show morphological correlation in FIR and X-ray, suggesting that the FIR emission is from dust grains collisionally heated by X-ray emitting plasma. The FIR emission of N63A resembles H-alpha emission, which implies that the FIR line radiation could be dominant. The FIR images of the rest two objects, DEM L249 and SNR in N4, show no correlation to the other-waveband images.