• Applied Science and Convergence Technology
• /
• 제23권2호
• /
• pp.61-71
• /
• 2014

A field-effect transistor (FET) is one of the most commonly used semiconductor devices. Recently, increasing interest has been given to FET-based biosensors owing totheir outstanding benefits, which are likely to include a greater signal-to-noise ratio (SNR), fast measurement capabilities, and compact or portable instrumentation. Thus far, a number of FET-based biosensors have been developed to study biomolecular interactions, which are the key drivers of biological responses in in vitro or in vivo systems. In this review, the detection principles and characteristics of FET devices are described. In addition, biological applications of FET-type biosensors and the Debye length limitation are discussed.

• 한국광학회지
• /
• 제9권5호
• /
• pp.342-347
• /
• 1998

비선형 Kerr 매질을 통과하는 Gaussian 빔에 대해 aberration-free approximation과 Huygens-Fresnel 회절 이론을 적용하여 Z-scan 투과율에 대한 해석해를 유도하였다. 비정질 $As_2S_3$ 박막에 대해 Z-scan 실험을 수행하였으며 이론과 비교하여 잘 일치함을 알았다. 633nm 파장에서 측정된 비선형 굴절률${\gamma}$의 크기와 기호 $+8.65{\times}10^{-6}\textrm{cm}^2/W$이며, 또한 먼 영역(far-field)에서 빔 세기분포를 측정하여 자기 집광(self-focusing)효과를 가시적으로 확인하였다.

• 한국전자파학회논문지
• /
• 제20권2호
• /
• pp.174-182
• /
• 2009

본 논문에서는 삼각형 패치와 서브 패치를 이용하여 국내 UHF RFID 대역에서 근거리장 영역과 원거리장 영역을 겸용하여 사용할 수 있는 안테나를 제안하였다. 제안된 안테나는 FR-4 기판에 마이크로스트립 패치로 인쇄되어 대량생산이 용이한 평면 구조이며, UHF RFID 주파수 대역(912 MHz)에서 동작하도록 설계하였다. 삼각형 패치를 이용하여 정면방향에서 원형편파 특성을 가지고 동작하며 서브 패치를 삽입하여 근거리장 영역에서 강하고 균일한 수직 자계를 형성 할 수 있도록 하였다. 측정 결과 제작된 안테나는 개구면에서 3 cm 떨어진 근거리장 영역에서 -25 dBA/m 이상의 수직 자계를 형성하며, 정면방향 원거리장에서 AR<3 dB의 원형편파를 복사하며 6 dBi의 복사 이득을 보였다.

• 한국소음진동공학회논문집
• /
• 제24권12호
• /
• pp.969-976
• /
• 2014

Nowadays, it is required for naval ships to estimate 3D underwater radiated noise pattern in all direction at peak frequencies of hull vibration for the reduction of being detected and doing the effective operation. For this purpose, the numerical method has to be developed to calculate 3D underwater radiated noise pattern with experimental data. It is very difficult to obtain the experimental data for the real ship. Alternative to get the experimental results is to use NAH(near-field acoustic holography) in acoustic tank with experimental model. Application of NAH in acoustic tank for the experimental model needs some investigation of reflection wave from the wall of the acoustic tank and unmeasured zone of the experimental model due to the supporting structure for it. In this study, the effect of reflection wave in the acoustic tank and unmeasured area of the experimental model when using the NAH was investigated with experiment and numerical model. From these, it is known for the error due to reflection wave can be reduced when the distance between the measurement plane and source is being shorten. Also, unmeasured area of the experimental model gives rise to some error in the estimation of the far-field acoustic pressure.

• 제어로봇시스템학회논문지
• /
• 제19권7호
• /
• pp.633-639
• /
• 2013

Several estimation methods used in the range measurement based wireless localization area have individual problems. These problems may not occur according to certain application areas. However, these problems may give rise to serious problems in particular applications. In this paper, three methods, ILS (Iterative Least Squares), DS (Direct Solution), and DSRM (Difference of Squared Range Measurements) methods are considered. Problems that can occur in these methods are defined and a simple hybrid solution is presented to solve them. The ILS method is the most frequently used method in wireless localization and has local minimum problems and a large computational burden compared with closed-form solutions. The DS method requires less processing time than the ILS method. However, a solution for this method may include a complex number caused by the relations between the location of reference nodes and range measurement errors. In the near-field region of the complex solution, large estimation errors occur. In the DSRM method, large measurement errors occur when the mobile node is far from the reference nodes due to the combination of range measurement error and range data. This creates the problem of large localization errors. In this paper, these problems are defined and a hybrid localization method is presented to avoid them by integrating the DS and DSRM methods. The defined problems are confirmed and the performance of the presented method is verified by a Monte-Carlo simulation.

• 한국자기학회지
• /
• 제5권3호
• /
• pp.165-170
• /
• 1995

자기적으로 분극 되어 큰 자화를 지닌 상태로 흐르는 물속 양성자의 핵스핀을 측정자장 영역에서 섭동자장을 인가하여 전이시키고, 이로부터 떨어진 지점의 고자장 하에 설치된 분리형 감지기를 이용한 양성자의 핵자기 공명신호 측정에 관한 연구를 수행하 였다. 감지기의 변조자장 크기, 변조자장 주파수 및 고주파 자장의 크기와 물 속도 및 측정자장 영역에서의 섭동 자장의 크기에 대한 핵자기 공명신호의 최적조건을 구하였다. 수 ${\mu}T$에서 mT 수준의 저자장 하에서 반치폭이 320 nT이고 신호 대 잡음비가 10.5인 Lorentz형 공명신호를 측정하였으며, 핵자기 공명신호의 크기 및 형태는 측정 자장의 크기 및 균일도와 무관하였다.

• 비파괴검사학회지
• /
• 제24권6호
• /
• pp.559-565
• /
• 2004

원주형 기공(SDH: side-drilled hole)의 초음파 산란장 해석을 두 가지 방법으로 수행하였다. 근사해석법인 Kirchhoff 근사법과 변수분리에 의한 엄밀해법으로 구한 원거리 산란진폭 식을 제시하고 시간영역에서 그 결과를 서로 비교하였다. 수직횡파(SV)의 SDH 입사를 고려하였으며, 원거리 산란 진폭을 주파수와 시간영역에서 각각 구하였다. 엄밀해법은 직접 산란파뿐만 아니라 잠행성 파를 나타내었으며, Kirchhoff 근사법은 잠행성 파를 예측하지 못하는 젓을 제외하고 엄밀해의 결과와 잘 일치하였다. 수침, 펄스-에코 시험법에서 SDH의 수신 신호 응답을 예측할 수 있는 두 가지 측정모델을 소개하였고, 수직 횡파가 45도로 입사할 때 지름 1mm SDH의 수신신호를 계산하고 그 결과를 실험과 비교하였다.

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.334-339
• /
• 2012

A study on electrical and electronic equipment will occur in the atmosphere, which is essential to cut the power to prevent the waste of power by power measurement technology development and to develop the technology to do this operation is the main core of standby power to detect and block it and return the configured for software and hardware, while the actual construction to ensure stability through field testing and debugging of problems improved accordingly, as well as ease of installation and so it could be done while the test. In addition, in terms of basic hardware switching of standby power when blocking, reducing stress and ensure stable operation and circuit design, power off and back to ensure stable operation even when a protection circuit is applied.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.79-86
• /
• 1999

Electronic Speckle Pattern Interferometry(ESPI) is a powerful tool to measure the vibration mode shape and resonance frequency for modal analysis. As for ESPI this method is very suited for full-field measurement of objects in industrial areas because the interferograms are recorded with a video camera and evaluated in real-time with a computer. In this study We performed experiments at the same constraint conditions as disk brake of the practical vehicle as far as possible and obtained the resonance frequencies and vibration mode shapes by using time-averaged ESPI at once. Finally to assure the expetimental results by time-averaged ESPI we also compare those with results obtained by Laser Doppler Vibrometer and obtained good agreement.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.209-212
• /
• 2004

This paper has been studied the impact of the distance between the signal source and the antenna under test on the antenna measurements such as gain and pattern (Phase). The concept and principles of the far-field in the antenna measurement are reviewed at first. The analysis on the impact has been focused on the 11 m parabola antenna system which will be used in the ground telemetry station for tracking and receiving the S-band ($2200\~2400MHz$) signal of KSLV-I. Also, the impact of the distance on the tracking performance of the antenna system has been analyzed.