• 한국생활과학회지
• /
• 제17권1호
• /
• pp.171-179
• /
• 2008

This study focuses on 130 estheticians currently working in and around Daegu and Gyeongbuk region, in order to find out the current state of affairs and side effects related to aromatherapy. This paper is based on a survey. SPSS win 11.0 program was used for the analysis of descriptive statistics and independent t-test. According to the result of analysis, about 33% of the estheticians have had allergy experience. And in terms of installation of an air ventilation fan, which is the most important facility in an treatment room, more than half (50.8%) replied they did not have one. There was a statistically significant difference between those estheticians suffering from allergy and those who did not, in symptoms of stuffy nose/rhinitis (P<0.01) and dry skin/itchiness (P<0.5). (Allergy symptoms from the 33% of estheticians were limited to those which occurred after he or she began career) On work related symptoms, those who had work history at hospitals/clinics or apothecaries were compared. A statistically relevant difference was confirmed between those estheticians with therapy experience and those who had none, in all symptoms except headaches and drowsiness/weariness. In other words, there was difference in symptoms such as dryness of skin/itchiness (P<0.01), stuffy nose/rhinitis, dry throat, tension/nervousness, dizziness, tired eyes(P<0.5), nausea, having trouble with focusing, and fatigue(P<0.1). Those estheticians who had a history of treatment especially suffered most from dryness of skin and itchiness. The rate of regular check-ups and the use of masks, employed for self protection, was lower than average (amounting to 5 points), with the use of masks especially having the lowest average (1.7) points.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1697-1702
• /
• 2014

A novel complex [$Zn(phen)(o-AB)_2$] [phen: 1,10-phenanthroline o-AB: o-aminobenzoic acid] was synthesized and characterized by elemental analysis and X-ray diffraction single-crystal analysis. The crystal crystallizes in monoclinic, space group P2(1)/c with $a=7.6397(6){\AA}$, $b=16.8761(18){\AA}$, $c=17.7713(19){\AA}$, ${\alpha}=90^{\circ}$, ${\beta}=98.9570(10)^{\circ}$, ${\gamma}=90^{\circ}$, $V=2.2633(4)nm^3$, Z = 4, F(000) = 1064, S = 1.058, $Dc=1.520g{\cdot}cm^{-3}$, $R_1=0.0412$, $wR_2=0.0948$, ${\mu}=1.128mm^{-1}$. The Zn(II) is six coordinated by two nitrogen and four oxygen atoms from the 1,10-phenanthroline and o-aminobenzoic acid to furnish a distorted octahedron geometry. The complex exhibits intense fluorescence at room temperature. Theoretical studies of the title complex were carried out by density functional theory (DFT) B3LYP method. CCDC: 898291.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.30-34
• /
• 2013

Prevention of exhaust gas back flow becomes a great interest to shipyards and shipowners in large container carriers because exhaust gas pollutes cargoes, flows back into the deck house and the engine room area through fresh air intakes and fan rooms, gives harmful damages to the crew's health and also gives thermal damages to electric equipments on the navigation deck. The phenomena of exhaust gas back flow has been studied with the analysis of sea trial records and wind tunnel tests and the height of the exhaust gas pipe, the front area of the deck house, the inflow speed and the position of the radar mast platform has been confirmed as the principal factors of exhaust gas back flow phenomena. The simple empirical formula to estimate exhaust gas back flow phenomena and the design guidances of exhaust gas related structures on deck has been introduced. In future, parametric studies for the exhaust gas back flow factors will be carried out with the CFD analysis. The results of this study will be the guide for development of the prevention method of exhaust gas back flow phenomena for large container carriers.

• 설비공학논문집
• /
• 제28권10호
• /
• pp.387-393
• /
• 2016

A ground source heat pump system maintains a constant efficiency due to its stable heat source and radiant heat temperature which provide a more effective thermal performance than that of the air source heat pump system. As an eco-friendly renewable energy source, it can reduce electric power and carbon dioxide. In this study, we analyzed one year of data from a web based remote monitoring system to estimate the thermal performance of GSHP with the capacity of 3RT, which is installed in a low energy house located in Daejeon, Korea. This GSHP system is a hybrid system connected to a solar hot water system. Cold and hot water stored in a buffer tank is supplied to six ceiling cassette type fan coil units and a floor panel heating system installed in each room. The results are as follows. First, the GSHP system was operated for ten minutes intermittently in summer in order to decrease the heat load caused by super-insulation. Second, the energy consumption in winter where the system was operated throughout the entire day was 7.5 times higher than that in summer. Moreover, the annual COP of the heating and cooling system was 4.1 in summer and 4.2 in winter, showing little difference. Third, the outlet temperature of the ground heat exchanger in winter decreased from $13^{\circ}C$ in November to $9^{\circ}C$ in February, while that in summer increased from $14^{\circ}C$ to $17^{\circ}C$ showing that the temperature change in winter is greater than that in summer.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1018-1024
• /
• 2010

The printer noise consists of the noise of the various components and parts such as motor, fan and solenoid. And the human's printing sound recognition shows various aspects when the printer starts to print papers because the components operate at the same time. Especially, printers are usually installed in the quiet office room. Therefore the printing noise is related to its competitiveness in the market. The importance of the printer sound qualities is increasing and it is necessary to develop the sound quality evaluation system, so it is a key point to identify the noise source of the printer and develop the sound quality index to each component. By using this evaluation system, it is possible to evaluate the sound quality of a prototype printer compared to the already existing one. In this paper, the printer sound quality evaluation system was developed by the following steps. Firstly, the signal processing method was applied to the recorded printing sound to identity and split the noise of components. Secondly, the MLR(multiple linear regression) method and the psychoacoustics were used to develop the sound quality index. Finally, the improvement of the printer sound quality is possible by using the result of the MLR and the path analysis. The output of this research will be applied to the development of a new printer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.382-382
• /
• 2012

CIGS thin films have received great attention as a promising material for solar cells due to their high absorption coefficient, appropriate bandgap, long-term stability, and low cost production. CIGS thin films are deposited by various methods such as co-evaporation, sputtering, spray pyrolysis and electro-deposition. The deposition technique is one of the most important processes in preparing CIGS thin film solar cells. Among these methods, co-evaporation is one of the best technique for obtaining high quality and stoichiometric CIGS films. However, co-evaporation method is known to be unsuitable for commercialization. The sputtering is known to be very effective and feasible process for mass production. In this study, CIGS thin films have prepared by rf magnetron sputtering using a $Cu(In_{1-x}Ga_x)Se_2$ single quaternary target without post deposition selenization. This process has been examined by the effects of deposition parameters on the structural and compositional properties of the films. In addition, we will explore the influences of substrate temperature and additional annealing treatment after deposition on the characteristics of CIGS thin films. The thickness of CIGS films will be measured by Tencor-P1 profiler. The crystalline properties and surface morphology of the films will be analyzed using X-ray diffraction and scanning electron microscopy, respectively. The optical properties of the films will be determined by UV-Visible spectroscopy. Electrical properties of the films will be measured using van der Pauw geometry and Hall effect measurement at room temperature using indium ohmic contacts.

• 한국방사선학회논문지
• /
• 제14권5호
• /
• pp.563-575
• /
• 2020

본 연구 목적은 컨테이너 보안 검색용 선형가속기에서 발생하는 방사화 특성을 평가하는 것이다. 전산모사 설계는 첫째, 표적은 텅스텐(Z=74) 단일물질 표적 및 텅스텐(Z=74)과 구리(Z=29) 복합물질 표적으로 구성하였다. 둘째, 부채꼴(Fan beam) 조준기는 물질에 따라 납(Z=82) 단일 물질과 텅스텐(Z-74)과 납(Z=82)의 복합물질로 구성하였다. 셋째 선형가속기가 위치한 방(Room)의 콘크리트는 Magnetite type 및 불순물(Impurity)을 포함하였다. 연구 방법은 첫째, MCNP6 코드를 이용하여 선형가속기 및 구조물을 F4 Tally로 광중성자 플럭스(Flux)를 계산하였다. 둘째, MCNP6 코드에서 계산된 광중성자 플럭스를 FISPACT-II에 적용하여 방사화 생성물을 평가하였다. 셋째, 방사화 생성물의 비방사능을 통해 해체 평가를 진행하였다. 그 결과 첫째, 광중성자 분포는 표적에서 가장 높게 나왔으며, 조준기 및 10 cm 깊이의 콘크리트 순으로 나타났다. 둘째, 방사화 생성물은 텅스텐 표적 및 조준기에서 W-181, 불순물이 포함된 콘크리트에서 Co-60, Ni-63, Cs-134, Eu-152, Eu-154 핵종이 부산물(by-product)로 생성되었다. 셋째, 해체 시 텅스텐 표적은 90일 이후 자체 처분 허용 농도를 만족하는 것으로 보였다. 이러한 결과는 9 MeV 에너지에서의 광중성자 수율(Yield) 및 방사화 정도가 미미한 것으로 확인할 수 있었다. 하지만, 선형가속기 텅스텐 표적 및 조준기에서 발생한 W-181은 수리를 위한 분해 시 피폭의 영향을 줄 수 있을 것으로 생각된다. 따라서, 본 연구는 컨테이너 보안검색용 선형가속기 방사화된 부품관리에 관한 기초 자료를 제시한 것이다. 또한, 컨테이너 보안 검색용 선형 가속기 해체 시 자체처분을 만족하는 농도 기준을 입증하는데 활용될 수 있을 것으로 기대한다.

• 해양환경안전학회지
• /
• 제29권6호
• /
• pp.697-703
• /
• 2023

최근 대기오염으로 인한 환경오염을 줄이고자 국제 산업계의 노력의 일환으로 국제해사기구(IMO)의 규제 발효등으로 이어지고 있다. IMO는 EEXI,EEDI,CII 등 선박에서 나오는 대기오염을 줄이기 위해 각종 규제를 발효시키고 선박에서 소모되는 전력을 줄여 에너지를 절약하는 방안을 추진하고 있다. 선박에서 사용되는 전력의 대부분은 전동기가 차지한다. 선박에 설치된 전동기 중 큰 부하를 차지하는 기관실 송풍기는 수요와 관계없이 정속운전으로 운전하기 때문에 주파수제어를 통한 에너지절감을 기대할 수 있다. 본 연구에서는 발전기의 과급기에 연소공기를 공급하는 발전기 송풍기의 전동기 주파수를 제어하여 에너지 절감에 대한 실효성을 입증하였다. 송풍기 주파수 입력에 따른 과급기출구 온도의 출력 데이터를 기반으로 시스템을 모델링하고, 과급기 출구온도를 목표값으로 하여 주파수를 제어하는 PI 제어계를 형성하여 과급기 설계기준 출구온도를 유지하면서 송풍기의 주파수 제어를 통해 연간 15,552kW 전력소모량을 절감하였다. 송풍기 팬 주파수 제어를 통한 에너지절감액의 유효성은 하계(4월~9월) 및 동계(3월~10월) 기간동안 검증하였으며 이를 토대로 실습선의 연간 6,091천원의 유류비 절약과 이산화탄소 8.5Ton, SOx 2.4kg, NOx 7.8kg의 대기오염물질 저감을 달성하였다.

• 한국음향학회지
• /
• 제24권8호
• /
• pp.469-480
• /
• 2005

현재 국악기의 음향특성에 대한 상세 정보가 매우 부족하여 국악당의 설계에 있어서 최적의 음향을 전달하는 공간을 형성하지 못하게 하는 한 원인이 되고 있다. 따라서, 대중적이고 대표적인 국악기의 음향특성을 측정하고 분류한 후 데이터베이스를 구축하면, (1) 향후의 국악 및 국악기 개발에 대한 기초연구로서 활용될 수 있으며, (2) 국악 전용 연주장의 설계에 있어서 입력 데이터로 요긴하게 활용될 수 있으리라 판단된다. 본 연구는 국악기의 음향방사특성을 조사하기 위한 제2단계의 연구로서, 기존의 연구[1]에 새로운 국악기 8종을 추가하였다. 선정된 국악기는 현악기중에서 거문고와 해금, 관악기 중에서 피리와 태평소, 타악기 중 북과 꽹가리, 징 및 남성 창으로, 원거리 (far-field) 음향 방사특성을 조사하였다. 무향실에서 시행된 지향특성실험을 통하여 얻은 국악기의 음향특성을 컴퓨터 시뮬레이션을 적용하여 국악기의 지향특성의 차이를 규명하고 또한 다양한 형태의 공간에 음원의 방사특성의 차이에 따른 실내음향성능의 변이를 조사하였다. 측정 결과, 국악기마다 주파수별 지향특성은 각기 다르게 나타났으며 무지향성 음원과 국악 음원을 사용하였을 때 음향 인자들 사이에 큰 차이를 보였다. 본 연구에서 제시된 데이터와 설계 방법론 등은 향후 국악원의 설계에 있어서 기본적인 자료로 활용될 수 있다고 기대된다.

• 한국태양에너지학회 논문집
• /
• 제34권1호
• /
• pp.72-80
• /
• 2014

This study proposed a wind power generation system utilizing outdoor air on the rooftop and indoor ventilation, which would increase according to the building height, as a way to help to save energy consumption in a building by using wind power energy of the new renewable energy sources. The study measured the distribution of air currents and power generation according to the usage factor of exhaust pipes in the kitchen and bathroom and identified the elements to consider when applying a wind power generation system to buildings in order to use outdoor air on the rooftop increasing according to the height and the indoor ventilation produced in the facility vertical shafts inside the buildings by installing a wind power generation system on the rooftop. (1) The study measured the ventilation velocity of the kitchen hood and bathroom ventilation fan by changing the zone areas by the households according to the usage factor of [${\alpha}$]=33~100%. As a result, the kitchen ventilation pipe generated the ventilation wind of 3.0m/s or more at the usage factor of [${\alpha}$] 66% or higher, and the bathroom ventilation pipe generated ventilation velocity lower than 3.0m/s, the blade velocity of the wind power generator, even after the usage factor rose to [${\alpha}$]=100%. (2) As the old bathroom ventilation pipe generated the ventilation velocity of 3.0m/s, the blade velocity of the wind power generator, even with the rising usage factor [${\alpha}$], the application of an outdoor air induction module increased the ventilation velocity by 2.9m/s at the usage factor of [${\alpha}$]=33%, 3.8m/s at the usage factor of [${\alpha}$]=66%, and 3.6m/s at the usage factor of [${\alpha}$]=100%. Thus the ventilation velocity of 3.0m/s, the blade velocity of the wind power generator, or higher was secured. (3) The findings prove that the applicability of a wind power generation system using outdoor air on the rooftop and indoor ventilation is excellent, which raises a need for various efforts to increase the possibility of its commercialization such as securing its structural stability according to momentary gusts on the rooftop and typhoons in summer and making the structure light to react to the wind directions of outdoor air on the rooftop according to the seasons.