• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.11
• /
• pp.1634-1638
• /
• 2002

Quantification of endogenous amino acid loss at the terminal ileum is an essential means for calculation of the true amino acid digestibility of a feedstuff. Since nitrogen appeared in the determined diet or not could shift the results very much, also, none of digestibility markers could be recovered with 100% rate at the terminal ileum, the objectives of the present study were: (1) to determine endogenous amino acid losses when fed either a casein diet or a protein-free diet and (2) to examine the reliability of chromic oxide or acid insoluble ash in the protein-free diet. Six ileal-cannulated pigs ($65{\pm}1.85 kg$ BW) with a simple T-cannula in the terminal ileum were used in a replicated $3{\times}3$ Latin square designed trial, after allowed a 14 d recuperation period. Each test period ran for 12 days comprised of a 10 d adjustment period and a 2 d collection period. The endogenous AA losses of His, Ile, Lys, Cys, Thr, Val, Trp, Asp, Glu, and Ser from pigs fed the casein diet were significantly higher than those of the protein-free diet (p<0.05). No significant difference was found in the amount of endogenous amino acid loss when determined with the different markers in the protein-free diet (p>0.05). These data suggest that endogenous amino acid loss could be underestimated when a protein-free diet is used. A direct effect of dietary peptides on the endogenous amino acid loss was found when the casein diet was fed. Our results also indicate that acid insoluble ash can be used as an inert marker as an alternative to chromic oxide when measuring endogenous amino acid loss.

• Earthquakes and Structures
• /
• v.14 no.3
• /
• pp.273-283
• /
• 2018

Previous experimental researches indicate that reinforced concrete beam-column joints play an important role in the mechanical properties of moment resisting frame structures, so as to require proper design. In order to get better understanding of the beam-column joint performance, a rational model needs to be developed. Based on the former considerations, two typical models for calculating the shear carrying capacity of the beam-column joint including the inelastic reinforced concrete joint model and the softened strut-and-tie model are selected to be introduced and analyzed. After examining the applicability of two typical models mentioned earlier to interior beam-column joints, several adjustments are made to get better predicting of the test results. For the softened strut-and-tie model, four adjustments including modifications of the depth of the diagonal strut, the inclination angle of diagonal compression strut, the smeared stress of mild steel bars embedded in concrete, as well as the softening coefficient are made. While two adjustments for the inelastic reinforced concrete joint model including modifications of the confinement effect due to the column axial load and the correction coefficient for high concrete are made. It has been proved by test data that predicted results by the improved softened strut-and-tie model or the modified inelastic reinforced concrete joint model are consistent with the test data and conservative. Based on the test results, it is also not difficult to find that the improved beam-column joint model can be used to predict the joint carrying capacity and cracks development with sufficient accuracy.

• Geomechanics and Engineering
• /
• v.15 no.1
• /
• pp.615-620
• /
• 2018

In order to analyze the healing effectiveness of rock salt cracks affected by the applied stresses and time, we used the ultrasonic technology to monitor the ultrasonic pulse velocity (UPV) variations for different initial stress-damaged rock salts during self-healing experiments. The self-healing experiments were to create different conditions to improve the microcracks closure or recrystallized, which the self-healing effect of damaged salt specimens were analyzed during the recovery period about 30 days. We found that: The ultrasonic pulse velocity of the damaged rock salts increases rapidly during the first 9 days recovery, and the values gradually increase to reach constant values after 30 days. The damaged value and the healed value were identified based on the variation of the wave velocity. The damaged values of the specimens that are subject to higher initial damage stress are still keeping in large after 30 days recovery under the same recovery condition It is interesting that the damage and the healing were not in the linear relationship, and there also existed a damage threshold for salt cracks healing ability. When the damage degree is less than the threshold, the self-healing ratio of rock salt is increased with the increase in damage degree. However, while the damage degree exceeds the threshold, the self-healing ratio is decreased with the increase in damage.

• Advances in aircraft and spacecraft science
• /
• v.6 no.6
• /
• pp.529-550
• /
• 2019

The effect of multiple process parameters on a set of continuous response variables is, especially in experimental designs, difficult and intricate to determine. Due to the complexity in aeroacoustic and vibroacoustic studies, the often-performed simple one-factor-at-a-time method turns out to be the least effective approach. In contrast, the statistical Design of Experiments is a technique used with the objective to maximize the obtained information while keeping the experimental effort at a minimum. The presented work aims at giving insights on Design of Experiments applied to aeroacoustic and vibroacoustic problems while comparing different experimental designs and approximation models. For this purpose, an experimental rig of a ducted low-pressure fan is developed that allows gathering data of both, aerodynamic and aeroacoustic nature while analysing three independent process parameters. The experimental designs used to sample the design space are a Central Composite design and a Box-Behnken design, both used to model a response surface regression, and Latin Hypercube sampling to model an Artificial Neural network. The results indicate that Latin Hypercube sampling extracts information that is more diverse and, in combination with an Artificial Neural network, outperforms the quadratic response surface regressions. It is shown that the Latin Hypercube sampling, initially developed for computer-aided experiments, can also be used as an experimental design. To further increase the benefit of the presented approach, spectral information of every experimental test point is extracted and Artificial Neural networks are chosen for modelling the spectral information since they show to be the most universal approximators.

• Earthquakes and Structures
• /
• v.19 no.5
• /
• pp.347-359
• /
• 2020

The Mega-Sub Controlled Structure System (MSCSS), an innovative vibration passive control system for building structures, is improved by adding lead rubber bearings (LRBs) on top of the substructure. For the new system, a genetic algorithm is used to optimize the dynamic parameters and distributions of dampers and LRBs. The program uses various seismic performance indicators as optimization objectives, and corresponding results are compared. It is found that the optimization procedure for maximizing the energy dissipation ratio yields the best solutions, and optimized models have consistent seismic performances under different earthquakes. Seismic performances of optimized MSCSS models with and without LRBs, as well as the traditional Mega-Sub Structure model, are evaluated and compared under El Centro wave, Taft wave and 20 other artificial waves. In both elastic and plastic analysis, the model with LRBs shows significantly smaller story drift and horizontal acceleration than those of the other two models, and fewer plastic hinges are developed during severe earthquakes. Energy analysis also shows that LRBs installed in proper locations increase the deformation and energy dissipation of dampers, thereby significantly reduce the kinetic, potential, and hysteretic energy in the structure. However, LRBs do not have to be mounted on all the additional columns. It is also demonstrated that LRBs at unfavorable locations can decrease the energy dissipation for dampers. After LRBs are installed, the optimal damping coefficient and the optimal damping exponent of dampers are reduced to produce the best damping effect.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.7
• /
• pp.3329-3334
• /
• 2012

Background: Several potential risk factors have been identified for diffuse large B-cell lymphoma (DLBCL); however, epidemiological studies investigating the association between these risk factors and DLBCL have yielded inconsistent results. Objectives: To investigate potential medical, lifestyle, and environmental risk factors of DLBCL in Shanghai, China through a hospital-based case-control study. Method: One-hundred-and-forty-seven newly diagnosed DLBCL patients and 294 sex- and age-matched controls were recruited from 11 hospitals in Shanghai between 2003 and 2007. A standardized structured questionnaire was used to obtain patient data on demographics, medical history, family history, lifestyle, and environmental exposures. Conditional logistic regression models were used to estimate odds ratios (ORs), with 95% confidence intervals (CIs), for risk associated with each data category. Results: History of tuberculosis (TB) infection and "living on a farm" were positively associated with DLBCL (TB: OR=3.05, 95% CI: 1.19-7.80; farm: OR=1.82, 95% CI: 1.21-2.73). In contrast, taking traditional Chinese medicine was negatively associated with DLBCL (OR=0.36, 95% CI: 0.14-0.89). No significant correlation with DLBCL risk was found for any of the other potential risk factors (p>0.05), including but not limited to hair dyes, alcohol drinking, smoking, and home/workplace renovation within one year. Conclusions: Consistent with results from previous studies in other DLBCL case populations, traditional Chinese medicine appeared to have a direct or indirect protective effect against DLBCL. However, this study also identified a possible predisposition for DLBCL in TB sufferers and farmers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.5
• /
• pp.658-664
• /
• 2002

This study was conducted to determine a proper feeding regime for lactating Holstein cows during the warm season in Taiwan. In Feeding Trial, 21 lactating Holstein cows were randomly allotted into three feeding regimes in a Completely Randomized Design. The feeding regimes were roughage fed ad libitum along with concentrate fed either twice daily (2C) or four times daily (4C), and total mixed ration (TMR) for 8 weeks. No significant differences among the three feeding regimes were found in body weight changes, and intakes in terms of dry matter, crude protein and net energy. For milk yield and 4% FCM yield, 4C were higher than the other two feeding regimes (p<0.05). No significant differences were found in milk compositions or differences noted in the yields of the respective milk components. TMR was worse than 2C and 4C (p<0.05) in milk production efficiencies in terms of dry matter intake per kg milk yield, crude protein intake per kg milk protein yield, as well as dry matter intake, net energy intake and crude protein intake per kg 4% FCM yield. Three ruminally fistulated Holstein dry cows were randomly assigned into the same three feeding regimes in a 3${\times}$3 Latin Square Design. No significant differences were found among the feeding regimes in ruminal pH, ammonia nitrogen, total VFA concentration, molar percentages of VFA, and acetic acid: propionic acid ratio (C$_2$/C$_3$). Taken all together, roughage fed ad libitum and concentrate fed four times daily was the better feeding regime for lactating cows during the warm season in Taiwan.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.1
• /
• pp.147-153
• /
• 1993

A total of 109 heads of horses and ponies from eight horseback riding clubs nearby Central Taiwan were investigated to evaluate the blood parameters and the biochemical compositions of serum for the documentation of clinical pathological diagnosis and exercise physiology. Blood samples were collected from the jugular vein of resting horses. The sex difference in the blood traits were compared both in horses and in ponies. Results shows that total plasma proteins (PP) and hematocrit (PCV) were found higher in male horses than in females (p < 0.05). The sexual effect also exertes a significant influence on the leucocyte (WBC) count, but not on the erythrocyte (RBC) concentration. According to the differential counts of leucocytes, the number of monocytes and lymphocytes was higher in the male pony than that of in male horse. A close relationship Between the erythrocyte sedimention rate (ESR) and the other blood parameters were found especially in PCV, RBC concentration, and plasma protein level. The average ESR observed at 60 minutes were $21.80{\pm}21.87mm$, $39.50{\pm}18.90mm$ and $43.73{\pm}17.89mm$ in stallions, geldings, and mares, respectively. Most of the biochemical components of horse serum detected were distributed in normal ranges, although some of the items show a great variation in such a large sample size.

• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.91-99
• /
• 2016

This study explores the effects of advertising's interactivity on consumers' attitude, brand awareness, intention of word-of-mouth and purchase intention through a comparison between high interactive advertising and low interactive advertising. Experiment was carried out with two factorial design using high and low interactive advertising messages and two different countries. The respondents were 120 Korean and 120 Two hundreds forty valid questionnaires were collected. According to the research results, the brand awareness and attitude of high interactive advertising is much higher than the low one to the consumers of Korean and Chinese. The consumers of Korean and Chinese who were exposed to high interactive advertising have high intention to word-of-mouth in high interactive advertising. Korean and Chinese consumers also have high intention to purchase when they watch the high interactive advertising. Between two countries, Chinese consumers have higher intention to purchase than Korean consumers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.849-859
• /
• 2020

The semi-empirical equation and commercial computational tool were used to predict the base drag of a guided missile with free-stream Mach numbers and chamber pressures, and the results were generally agree each other. Differences in flow characteristics and base drags were observed with over/under expansion conditions by the nozzle. Under the over-expansion condition, the base pressure decreased as the expansion fan was generated at upper region of the base, and base pressure decreased further with increasing free-stream Mach number as the expansion becomes strong. Under the under-expansion conditions, a shock wave was generated around the base by the influence of the nozzle flow, which increased the base pressure, and the effect increased as the chamber pressure increased. Under the same chamber pressure condition, as the free-stream Mach number increases, the characteristic that the base pressure decreases as the shock wave generated at the base moves downstream was observed.