• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.15-18
• /
• 2009

Technology demonstration for the development of a 75-tonf liquid rocket engine(LRE) thrust chamber for a space launch vehicle has been started on the basis of the previously acquired 30-tonf LRE technologies. For this purpose, a technology demonstration plan was established upon considering the currently available firing test facility in Korea and performance evaluation firing tests were performed on technology demonstration model thrust chambers under a restricted test condition. This paper describes the plan and current status of technology demonstration for a 75-tonf LRE thrust chamber.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.6
• /
• pp.71-82
• /
• 2002

The purpose of this study is to develop a 3 dimensional spatial planning model (3DSPLAM) for facilities allocation and visual evaluation in improvement planning of rural village. For the model development, this study developed both planning layers and a modelling process for spatial planning of rural villages. The 3DSPLAM generates road networks and village facilities location automatically from built area plan map and digital elevation model generated by geographic information system. The model also simulates 3-dimensional villagescape for visual presentation of the planned results. The 3DSPLAM could be conveniently used for automatic allocation of roads, easy partition of land lots and reasonable locating of facilities. The planned results could be also presented in the stereoscopic models with varied viewing positions and angles.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.52-61
• /
• 2017

Considering its significant impact on the cost and schedule of construction projects, formwork as one part of temporary facility categories in construction should be arranged precisely. Current practice in the formwork planning is often conducted manually and repetitively, causing low efficiency and time waste. This study proposes an automated framework to generate more accurate and detailed formwork plans by utilizing information from building information modeling (BIM) considering the adequate geometric and semantic information provided by the BIM model. The dimensions and quantities information of elements in a building can be extracted automatically. Then, a rule is prepared for calculating the required forms erected around elements based on the contact areas. Finally, an algorithm of integrating first fit decreasing (FFD) with coordinated bottom left (CBL) is applied to automatically generate the formwork plan. The BIM-based automated planning framework is demonstrated by an illustrative example. The results show that the proposed framework can generate the formwork plan accurately and automatically, and significantly improve the efficiency in the formwork plan and reuse.

• Journal of Korean Society of Transportation
• /
• v.5 no.1
• /
• pp.47-58
• /
• 1987

A commodity distribution problem with intertemporal storage facilities and dynamic transportation networks is proposed. mathematical integer programming methods and multiobjective programming techniques are used in the model formulation. Dynamic characteristics of commodity distribution problems are taken into account in the model formulation. storage facility location problems and transportation link addition problems are incorporated into the intertemporal multicommodity distribution problem. The model is capable of generating the most efficient and rational commodity distribution system. Therefore it can be utilized to provided the most effective investment plan for the transportation infrastructure development as well as to evaluate the existing commodity distribution system. The model determines simultaneously the most efficient locations, sizes, and activity levels of storage facilities as well as new highway links. It is extended to multiobjective planning situations for the purpose of generating alternative investment plans in accordance to planning situations. sine the investment in transportation network improvement yields w\several external benefits for a regional economy, the induced benefit maximization objective is incorporated into the cost minimization objective. The multiobjective model generates explicitly the trade-off between cost savings and induced benefits of the investment in transportation network improvement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.281-284
• /
• 2006

The marine Transmission tower infrastructure erected in the SI-HWA lake is deteriorated and damaged by the various environment effect, and then, there is a possibility of going bad in the safety. The appropriate maintenance to ensure the security of the structure during life cycle is necessary. Specially the Jacket or the steel file foundation in the sea is apt to be corroded quickly. In this research, to establish life management system of 345kV Yonghung marine transmission tower structure, the actual durability research facility which can obtain the actual proof data is constructed. the maintenance guideline and procedure of the structure are established. Hereafter, there is a plan which will advance the research against the composition of the life prediction model, which is based on the data acquired from the actual durability research facility.

• Korean Institute of Interior Design Journal
• /
• v.19 no.2
• /
• pp.225-233
• /
• 2010

At this point in time South Korea is rapidly metastasizing to a aging society. A major cause of aging can be summarized as increased life expectancy, decrease of nuclear family and birthrate, and South Korea's progress is faster than any other country. From the 1970s, western society has changed social welfare to deinstitutionalization and community care because of problems about economic reason and facilities protection, so the type of elderly social service has also changed from the facility welfare service which is accommodated old people in certain facility to community welfare service which provides various welfare services with living together. Public facilities for low income group which are supported by government are lower, 6.6%, than the United States or Japan, 50%. They are divided into private manage facilities and subscription elderly facilities. These subscription elderly residential facilities show poor administration because of focusing on development and market analysis for investment returns. Therefore, in order to vitalize the elderly welfare residential facilities in Korea, we need plans about systematic services facilities for welfare and phased medical treatments. Therefore, the purpose of this study is that (1) the types and functions of residents for community elderly residential facilities in elderly welfare policies of U.S., and supported policies are researched as a transcendental model, (2) data about operating system with the principles of the market is analyzed, and (3) basic data about welfare facility plan for community residential elderly people is provided.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.159-167
• /
• 2015

We consider a wafer lot transfer/release planning problem from semiconductor wafer fabrication facilities to probing facilities with the objective of minimizing the deviation of workload and total tardiness of customers' orders. Due to the complexity of the considered problem, we propose a two-level hierarchical production planning method for the lot transfer problem between two parallel facilities to obtain an executable production plan and schedule. In the higher level, the solution for the reduced mathematical model with Lagrangian relaxation method can be regarded as a coarse good lot transfer/release plan with daily time bucket, and discrete-event simulation is performed to obtain detailed lot processing schedules at the machines with a priority-rule-based scheduling method and the lot transfer/release plan is evaluated in the lower level. To evaluate the performance of the suggested planning method, we provide computational tests on the problems obtained from a set of real data and additional test scenarios in which the several levels of variations are added in the customers' demands. Results of computational tests showed that the proposed lot transfer/planning architecture generates executable plans within acceptable computational time in the real factories and the total tardiness of orders can be reduced more effectively by using more sophisticated lot transfer methods, such as considering the due date and ready times of lots associated the same order with the mathematical formulation. The proposed method may be implemented for the problem of job assignment in back-end process such as the assignment of chips to be tested from assembly facilities to final test facilities. Also, the proposed method can be improved by considering the sequence dependent setup in the probing facilities.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.160-167
• /
• 2011

An Analysis on the Pre-Feasibility Evaluation Factors of Activation for Welfare Facilities for the Residents in Apartment Building. The adapted research method of selected case five apartment building in D new town and carried out questionnaire survey to residents and user for draw items of feasibility evaluation. Drew items of feasibility evaluation classify as Plan section, Design section, and Operation section and evaluate the weight of each section utilizing analytical hierarchy process (AHP). Depending on the purpose and methods. The results of this study are as follows: Such as Plan section, Composition of Program Facility, User Charge Survey, Arrangement of Program Room were analyzed highest. Such as Design section, Arrangement of Program Room, Circulation planning, Educational Equipment were analyzed highest. And such as Operation section, Operation costs, Operation Plan, Review of Program Facility were analyzed highest.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.2
• /
• pp.137-145
• /
• 2020

Various elements of Fabrication (FAB), mass production of existing products, new product development and process improvement evaluation might increase the complexity of production process when products are produced at the same time. As a result, complex production operation makes it difficult to predict production capacity of facilities. In this environment, production forecasting is the basic information used for production plan, preventive maintenance, yield management, and new product development. In this paper, we tried to develop a multiple linear regression analysis model in order to improve the existing production capacity forecasting method, which is to estimate production capacity by using a simple trend analysis during short time periods. Specifically, we defined overall equipment effectiveness of facility as a performance measure to represent production capacity. Then, we considered the production capacities of interrelated facilities in the FAB production process during past several weeks as independent regression variables in order to reflect the impact of facility maintenance cycles and production sequences. By applying variable selection methods and selecting only some significant variables, we developed a multiple linear regression forecasting model. Through a numerical experiment, we showed the superiority of the proposed method by obtaining the mean residual error of 3.98%, and improving the previous one by 7.9%.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.5
• /
• pp.421-430
• /
• 2017

In this study, a model was developed to predict for Disinfection By-Products (DBPs) generated in water supply networks and consumer premises, before and after the introduction of advanced water purification facilities. Based on two-way ANOVA, which was carried out to statistically verify the water quality difference in the water supply network according to introduce the advanced water treatment process. The water quality before and after advanced water purification was shown to have a statistically significant difference. A multiple regression model was developed to predict the concentration of DBPs in consumer premises before and after the introduction of advanced water purification facilities. The prediction model developed for the concentration of DBPs accurately simulated the actual measurements, as its coefficients of correlation with the actual measurements were all 0.88 or higher. In addition, the prediction for the period not used in the model development to verify the developed model also showed coefficients of correlation with the actual measurements of 0.96 or higher. As the prediction model developed in this study has an advantage in that the variables that compose the model are relatively simple when compared with those of models developed in previous studies, it is considered highly usable for further study and field application. The methodology proposed in this study and the study findings can be used to meet the level of consumer requirement related to DBPs and to analyze and set the service level when establishing a master plan for development of water supply, and a water supply facility asset management plan.