• Journal of Korea Multimedia Society
• /
• v.8 no.5
• /
• pp.633-640
• /
• 2005

In this paper, we propose an adaptive face region extraction algorithm based on skin color information. It consists oi the extraction of face candidate region and projection step. In the step of face candidate region extraction, we extract the pixels which are regarded as the candidate skin color pixels by using the given range. Then, the ratio between the total pixels and the extracted pixels is calculated. According to the ratio, we adaptively decide the range of the skin color and extract face candidate region. In the projection step, we project the extracted face candidate region into vertical direction to estimate the width of the face. Then the redundant parts are efficiently removed by using the estimated face width. And the extracted face width information is used at the horizontal projection step to extract the height of the face. From the experiment results for the various images, the proposed algorithm shows more accurate results than the conventional algorithm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.6
• /
• pp.938-948
• /
• 2009

The purpose of this study was to offer typical facial shapes Korean women in their 20's to 50's. We used facial photographs of 600 Korean women obtained from $2003\sim2004$ Size Korea Project and we measured these photographs indirectly in this study by utilizing the Venus face2D program. Total 62 measurements on the face were measured and analyzed by statistical methods. The results were as follows. First of all, the mean of face length was 196mm, top face length was 62.3mm, middle face length was 68.9mm, bottom face length was 66.5mm, mean of forehead width was 125.1mm. As based on those average sizes, we proposed a average facial size and shape of Korean women and a average facial size and shape of 20's, 30's, 40's and 50's in this study. When examined characteristic of 20's facial shape, it was recognized that the width of forehead was wider and the width of gnathion was smaller than other age groups. In the characteristic of 30's facial shape, the ratios of facial length, top of face, middle of face and bottom of face were balanced well, as comparing with other age groups. Overall, the values of facial measurement of 30's were similar to the averages of total women. In the facial shape of 40's, mean length and width of face each were the smallest among each age group. The eye shape of 40's was more drooped than the average eye shape and the protrusion of the zygomatic bone was significantly different. In case of the facial shape of 50's, it was similar to the facial shape of 40's, but mean lengths and widths of 50's face were slightly larger than the values of 40's. The eye shape of 50's was more drooped than average group and the eye length was the smallest among all age groups.

• The korean journal of orthodontics
• /
• v.20 no.2
• /
• pp.293-304
• /
• 1990

The purpose of this study was to describe the morphologic differences between long-face adults and normal-face adults on the lateral and P-A cephalograms. Long-face and normal-face subifects were selected clinically, and then each of them was taken the lateral cephalogram. According to SN-MP angle and ATFH on the lateral cephalogram, long-face group and normal-face group were classified. 2 long-face adults and 18 normal-face adults were collected, and each of them was taken the P-A cephalogram. The results were as follows: 1. The morphologic differences between long-face adults and normal-face adults were closely related to mandibular morphology. 2. Long-face adults, compared with normal-face adults, demonstrated significant increase in ALFH, and significant decrease in ramus height. 3. Long-face adults, compared with normal-face adults, demonstrated significant increase in AUDH and, ALDH, especially in ALDH. 4. On the P-A cephalogram, no measures of transverse dimension demonstrated significant differences between two groups. 5. On the P-A cephalogram, facial height/facial width ratio was significantly larger than normal in the long-face adults, and in the normal-face adults, facial height/facial width ratio was approximately 90%. 6. In the correlation analysis of SN-MP angle and ATFH with all the other variables, the correlation coefficients of SN-MP angle and PTFH/ATFH that of ATFH and ALFH on the lateral cephalogram demonstrated the highest value, and on the P-A cephalogram, SN-MP angle and Cg-GA-Me (Lt.), ATFH and lower facial height demonstrated the highest value of correlation coefficients.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.605-608
• /
• 2007

The discharge characteristics of the face-to-face sustain electrode structure employing auxiliary address pulse are investigated under a sustain driving frequency of 20 kHz and various auxiliary address pulse widths (500 ns, $1{\mu}s$, $2\;{\mu}s$) in the 6-in. test panel (42-in. Full HD grade) with a pressure of 450 Torr and a 4 % Xe-content. The luminance and the luminous efficiency at the auxiliary address pulse width of 500 ns are improved more than these of $1\;{\mu}s$ and $2\;{\mu}s$. At the auxiliary address pulse width of 500 ns, the luminous efficiency shows about 0.96 lm/W at the auxiliary pulse of 90 V and the sustain voltage of 260 V.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.204-210
• /
• 2000

The mandibular contour determines the shape of the lower part of the face and thus influences the appearance of the face. A patient with a large, squarish, or broad face who desires a small, round, or slender face can undergo mandibular contouring surgery to reduce the width of the lower face. The successful correction of a prominent mandibular angle by conventional angle ostectomy has been reported. But, in the majority of patients with a widened facial appearance, both the mandibular angle and part of the mandibular body anterior to it are protuberant laterally, so both must be resected. The purpose of this study is to introduce a new method of performing mandibular contouring surgery, more effectively and easily, and to reduce postoperative complication and evaluate its results. We treated 6 patients who has prominent mandibular angle using multiple step osteotomy with angle-splitting ostectomy. The advantages of this new method are as following. (1) easily performable (2) effective mandibular contouring surgery by reducing the width of lower face (3) producing a natural relief of the mandibular angle (4) low risk of soft tissue damage and complications (5) shortening of the operation time. etc.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.145-155
• /
• 2023

Objectives: A fit test panel is needed to identify the fit performance of a respirator and its face seal. This is a criterion for selecting subjects that can represent the facial characteristics of users. Although anthropometry data has been developed for people in United States and China it is not yet present in Korea. This study aimed to develop a Korean fit test panel and test headform. Methods: For the 7th and 8th waves of the Size Korea anthropometry data, facial measurements of 11,429 people aged 15 to 69 years were used for analysis. PCA and bivariate panel were classified using the ISO16976-2:2022(E) anthropometrics analysis method. Based on this result, a static headform was developemed and a fit test chamber was constructed. Results: Of the 11,429 Korean people used for principal component analysis, 11,300 were included in the ellipse, marking an acceptance rate of 98.87% on PCA panel. The face types were classified into five types. Among them, a large, medium, and small static headform were printed using a 3D printer. In addition, 10,985 people (96.12%) were included in the bivariate panel based on face length and face width. The y-axis (face length) boundary was 97.87 to 134.59 mm, and the x-axis (face width) boundary was 120.75 to 158.23 mm. Conclusions: Compared to the ISO analysis, the Korean principal component was narrower in the width item (PC1) and longer in the length item (PC2). For the future, it is necessary to conduct a fit test using the developed headform and chamber device to confirm the usefulness of this Korean test panel. Therefore, this study is considered valuable as basic research for Korean test panels.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.650-655
• /
• 2016

Gears are components of transmission which transmit the power of an engine to a machine and offer numerous speed ratios, a compact structure, and high efficiency of power transmission. Gear train design in the automotive industry uses simulation software. However, PTO (Power Take-Off) gear design for agricultural applications uses the empirical method because of the wide range of load fluctuations in agricultural fields. The PTO is an important part of agricultural tractors which transmits the power to various tractor implements. Therefore, a simulation was essential to the optimal design of the PTO. When the PTO gear is optimally designed, there are many advantages such as low cost, reduced size, and light weight. In this study, we conducted the bending and contact safety factor simulation for the PTO gear of an agricultural tractor. The bending and contact safety factors were calculated on ISO 6336 : 2006 by decreasing the face widths of the PTO pinion and wheel gear from 18 mm at an interval of 1 mm. The safety factor of the PTO gear decreased as the face width decreased. The contact safety factors of the pinion and wheel gear were 1.45 and 1.53, respectively, when the face width was 18 mm. The simulation results showed that the face width of the PTO gear should be greater than 9 mm to maintain the bending and contact safety factors higher than 1. It would be possible to reduce the weight of the PTO gear for different uses and working conditions. This study suggests that the possibility of designing an optimal PTO gear decreases as its face width decreases.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.6
• /
• pp.407-420
• /
• 2003

Purpose : The purpose of this study was to analyse the facial changes and factors contributing to then after bilateral sagittal split ramus osteotomy of mandibular prognathism. Materials and Methods : Forty patients with Class III dental and skeletal malocclusion who were treated with bilateral sagittal split ramus osteotomy were reviewed. Frontal and lateral cephalometric radiographs were taken preoperatively, immediate postoperatively and more than six months postoperatively in each patient. After tracing the cephalometric radiographs, various parameters were measured. Results : 1. Gonial angle at postoperative two days was decreased about $10.4^{\circ}$ than preoperatively and gonial angle at postoperative six months was increased about $6.8^{\circ}$ than postoperative two days. So, gonial angle at postoperative six months was decreased about $3.6^{\circ}$ than preoperative gonial angle. 2. Facial height postoperative two days was decreased about 0.8mm than preoperatively and facial height at postoperative six months was decreased about 0.7mm than postoperative two days. So, facial height at postoperative six months was decreased about 1.5mm than preoperative facial height. 3. Mandibular width postoperative two days was decreased about 1.0mm than preoperatively and mandibular width at postoperative six months was increased about 1.8mm than postoperative two days. So, mandibular width at postoperative six months was decreased about 2.8mm than preoperative mandibular width. 4. Amount of set back and mandibular plane angle were not influencing on relapse degree. Conclusion : It is thought that bilateral sagittal split ramus osteotomy in mandibular prognathic patients is effective to improve long face and steep gonial angle. More prudent operation and careful postoperative management is required to maintain stable face postoperatively. Further research for soft tissue changes and factors which are related with relapse is needed.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.4
• /
• pp.30-42
• /
• 1986

On the analysis of cutting mechanics in orthogonal cutting, each cutting force component can be predicted. By adding the flank face wear term to the prediction equation for cutting force components, complete equations are obtained. Using these equations, it is shown that cutting force components are increased linearly as flank face wear land is developed, in theory and experiment. By making non-dimensional term ie. Fv/Fc, the width of variation of output signal Fv/Fc is greately decreased compared with each cutting force component as cutting condition is varied. Among these conditions, the variation of chip width in the range of more than 1mm and that of cutting velocity have little effect on the output signal Fv/Fc, that of Flank face werr land can be detected without difficulty.

• Transactions of Materials Processing
• /
• v.17 no.3
• /
• pp.203-209
• /
• 2008

In this paper, experimental investigation has been performed to analyze the forming process of toothed or serrated sheets, which is used as strap engaging surface of the seal to secure together overlapping portions of steel or plastic strapping ligature. Serration formed on the strap engaging surface of the seal prevent from relative slipping between overlapping ligatures after closing the seal. The geometry of tooth on the strap engaging surface is directly related to the quality of securing overlapping ligatures together. Inclined indentation followed by scratching operation has been proposed and applied to the experiments. Punch entry and face angles are selected as process variables to see the influence of these variables on the tooth geometry. Five different punch entry angles have been applied to experiments and three different punch face angles have been selected for each case of punch entry angle. Clay is selected as model material for experiments. Experimental results are summarized in terms of tooth height, tooth width, and aspect ratio such as tooth height to width ratio, respectively.