• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.315-318
• /
• 2005

The objective of this study is to find out discrepancy in ability of bond behavior between Carbon fiber-reinforced polymer(CFRP Plate) and concrete by method of experiment. For the objective, single and double face shear test were tested. From the experimental results, it was analyzed bond strength of FRP to concrete, distribution of stress and strain of FRP. The bond strength and the effective bond length was evaluated by the theory of existing studies. Effective bond length of single face test was smaller than it of double face test.

• Steel and Composite Structures
• /
• v.39 no.3
• /
• pp.229-241
• /
• 2021

This work focused on aluminum foam sandwich (AFS) with different foam core densities and different face-sheet thicknesses subjected to constant amplitude three-point bending cyclic loading to study its fatigue performance. The experiments were conducted out by a high frequency fatigue test machine named GPS-100. The experimental results showed that the fatigue life of AFS decreased with the increasing loading level and the structure was sensitive to cyclic loading, especially when the loading level was under 20%. S-N curves of nine groups of AFS specimens were obtained and the fatigue life of AFS followed three-parameter lognormal distribution well. AFS under low cyclic loading showed pronounced cyclic hardening and the static strength after fatigue test increased. For the same loading level, effects of foam core density and face-sheet thickness on the fatigue life of AFS structure were trade-off and for the same loading value, the fatigue life of AFS increased with aluminum foam core density or face-sheet thickness monotonously. Core shear was the main failure mode in the present study.

• Geomechanics and Engineering
• /
• v.24 no.4
• /
• pp.399-406
• /
• 2021

It is a key issue in the tunnel design to evaluate the stability of the excavation face. Two efficient analytical models in the context of the limit equilibrium method (LEM) and the limit analysis method (LAM) are used to carry out the deterministic calculations of the safety factor. The safety factor obtained by these two models agrees well with that provided by the numerical modelling by FLAC 3D, but consuming less time. A simple probabilistic approach based on the Mote-Carlo Simulation technique which can quickly calculate the probability distribution of the safety factor was used to perform the probabilistic analysis on the tunnel face stability. Both the cumulative probabilistic distribution and the probability density function in terms of the safety factor were obtained. The obtained results show the effectiveness of this probabilistic approach in the tunnel design.

• Journal of Fashion Business
• /
• v.13 no.3
• /
• pp.12-24
• /
• 2009

This paper aims to investigate if a total of 266 college students from Yanbian, China, and Korea's Jeonnam Province are satisfied with their face and body type, and to find out an image-development method, depending on body characteristics. For this, a questionnaire survey using the 5-point Likert Scale was conducted, and an SPSS program has been used for data analysis. Besides the descriptive analysis, crosstab analysis, t-verification, and frequency analysis have been conducted. As body shape, posture, costume, accessories and makeup play an important role in image formation, this paper intends to form positive ego through exact awareness of the body shape by providing base data to a set image-development strategy. Then, the result has turned out as follows: First, in terms of the body index (i.e., Rohrer index), both Korea's Jeonnam Province and China's Yanbian college students were included in a category of the mean value. In terms of satisfaction with their body shape, on the contrary, China's China's Yanbian college students were higher than Korea's Jeonnam Province college students. Second, male China's Yanbian college students were slightly higher than female China's Yanbian college students in terms of satisfaction with their facial shape. However, the male students showed no big interest in facial care. Third, in terms of facial shape, an egg-shaped face was the most preferred in both China's Yanbian and Korea's Jeonnam Province college students, followed by an inverted triangle-shaped face in China's Yanbian college students and a diamond-shaped face in Korea's Jeonnam Province college students, showing significant difference ($p{\le}.001$). Even though both college students live in Northeast Asia, their preference on facial shape turned out to greatly differ, which indicates their different social environments. This paper will be helpful in global marketing for college students who are the major consumers in the future as Korean-Chinese exchange increases.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.212-227
• /
• 2008

Since 3D face can be rotated freely in 3D space and illumination effects can be modeled properly, 3D face modeling Is more precise and realistic in face pose, illumination, and expression than 2D face modeling. Thus, 3D modeling is necessitated much in face recognition, game, avatar, and etc. In this paper, we propose a 3D face modeling method based on 3D morphable shape modeling. The proposed 3D modeling method first constructs a 3D morphable shape model out of 3D face scan data obtained using a 3D scanner Next, the proposed method extracts and matches feature points of the face from 2D image sequence containing a face to be modeled, and then estimates 3D vertex coordinates of the feature points using a factorization based SfM technique. Then, the proposed method obtains a 3D shape model of the face to be modeled by fitting the 3D vertices to the constructed 3D morphable shape model. Also, the proposed method makes a cylindrical texture map using 2D face image sequence. Finally, the proposed method builds a 3D face model by rendering the 3D face shape model with the cylindrical texture map. Through building processes of 3D face model by the proposed method, it is shown that the proposed method is relatively easy, fast and precise than the previous 3D face model methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5C
• /
• pp.351-358
• /
• 2006

The purpose of this study is to recommend the simulation method and procedure of behaviors of CFRD(Concrete Faced Rockfill Dam) concrete face slab with impoundment by centrifuge tests, to examine the effects of the flexural rigidity of the concrete face slab on the face slab deformation from the centrifuge tests, and to evaluate the effects of the stiffness of face supporting zone on the displacement and moment of face slab by numerical analysis which is verified by the centrifuge tests. In this study, the centrifuge tests on the two model dams with the concrete face slab of different flexural rigidity were carried out. Also, the centrifuge tests were simulated by numerical analysis of which input material properties were obtained by the triaxial tests on the model materials. The validity of numerical analysis was evaluated by comparison between the results of centrifuge tests and numerical simulation. The deformation pattern of the concrete face slab was examined with the various stiffness of the face supporting zone by numerical analysis. From the results of centrifuge tests, the effects of face slab thickness on the deformation of face slab were negligible. From the results of centrifuge tests and numerical analysis, it was found that the amplitude of the maximum displacement of face slab and the position where the maximum displacement was mobilized with impoundment were affected by the stiffness of face supporting zone rather than the flexural rigidity of concrete face slab.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.149-156
• /
• 1995

This paper presents the surface profile of machined workpiece in face milling operation. The roughness model of feed direction is considered the cutting condition, the profile and run-out of inserts. For the dynamic model the cutting system can be modeled as avibratory system. The dynamic model of surface roughness is considered the relative displacements between tool and work- piece which can be obtained from the cutting system. These model can predict various surface roughnesses. i.e. maximum and arithmetic mean surface ruughnesses. Therefore, the developed model can be used for the monitoring of surface roughness.

• Korean Journal of Cognitive Science
• /
• v.11 no.2
• /
• pp.79-87
• /
• 2000

In this paper we present a face recognition and face detection algorithm in MPEG compressed video. The proposed method consists three stage of processing steps. The first step is to produce a spatially reduced DC image form MPEG compressed video for processing. And the second step is face detection on reduced DC image. Finally, the last step is face recognition on partially extracted compressed frames which contain the detected faces. The spatially reduced DC image is produced from two dimensional inverse DCT of the DC coefficient and the first two AC coefficients. The face detection is performed on DC image and face recognition is performed on one extracted frame per GOP by using the K-L transform. In order to evaluate the proposed method, we carried out experiments on video database. The experiment results show the proposed method is very efficient and helpful for target tasks.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.2
• /
• pp.193-199
• /
• 2008

In this paper, it is proposed the implementation of face authentication system based on real-time image processing. We described the process implementing the two steps for real-time face authentication system. At first face detection steps, we describe the face detection by using feature of wavelet transform, LoG operator and hausdorff distance matching. In the second step we describe the new dual-line principal component analysis(PCA) for real-time face recognition. It is combines horizontal line to vertical line so as to accept local changes of PCA. The proposed system is affected a little by the video size and resolution. And then simulation results confirm the effectiveness of out system and demonstrate its superiority to other conventional algorithm. Finally, the possibility of performance evaluation and real-time processing was confirmed through the implementation of face authentication system.

• Journal of Home Health Care Nursing
• /
• v.12 no.1
• /
• pp.136-154
• /
• 2005

Purpose : This study purposed to conduct a comprehensive survey of home care nursing clients' quality of life based on the PRECEDE model. Method : This study selected 74 home care nursing clients registered at a university hospital in Incheon and performed face-to-face interviews by structured questionnaire. The research period was two months from the $2^{nd}$ of February to the $30^{th}$ of March in 2004. Result : According to the result of assessment at each stage of the PRECEDE model, home care nursing clients' quality of life was 13.88 out of 25 points, health level 15.22 out of 21, abilities to perform activities of daily living 29.26 out of 100, cognitive abilities 16.00 out of 30, social support 13.68 out of 20, and satisfaction with home care nursing service 33.26 out of 40. According to the result of stepwise regression in order to identify factors influencing home care nursing clients' quality of life, social support and abilities of daily living were found to be significant variables among the characteristics of each assessment stage. Conclusion : It is necessary to develop nursing intervention strategies for strengthening social support and enhancing abilities to perform activities of daily living in order to improve home nursing clients' quality of life.