• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2225-2233
• /
• 1994

In order to improve the cutting ability of face mill, a model for optimal cutter shape was developed to minimize resultant cutting force by combing cutting force model and optimal technique. Wear test and surface roughness test for optimized and conventional cutter were performed. The new optimized cutter shows longer tool life of 2.29 times than conventional cutter in light cutting condition and 2.52 times in heavy cutting condition. The surface roughness of workpiece by optimized cutter is improved in heavy cutting condition, but deteriorated in light cutting condition in comparison with conventional cutter. The surface profiles of workpiece were analyzed by Fourier transformation. The distribution of cut lay left on workpiece by optimized cutter is more regular than that by the conventional cutter.

• 제어로봇시스템학회논문지
• /
• 제4권6호
• /
• pp.795-801
• /
• 1998

In this paper, we propose a machine vision algorithm for inspecting inserts which are used for milling and turning operations. Major defects of the inserts are breakage and crack on insert surfaces. Among the defects, breakages on the face of the inserts can be detected through three stages of the algorithm developed in this paper. In the first stage, a multi-layer perceptron is used to recognize the inserts being inspected. Edge detection of the insert image is performed in the second stage. Finally, in the third stage breakages on the insert face are identified using Hough transform. The overall algorithm is tested on real specimens and the results show that the algorithm works fairly well.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.161-167
• /
• 1993

This paper deals with a new method for the machining of a die cavity defined by sculptured surfaces. In machining die cavities or pockets, process planners have been faced with some troulbes. One of the troubles ius to rebove a great deal of material within a given boundary while avoiding cutter interference. Cutter interference is a ciritical problem in NC machining of a die cavity. Even though this cavity machining has been implemented in many CAM systems, most of them can handle limited shapes of cavities or pockets. In this paper, a procedure has been developed to machine die cavity or pocket of a sculptured surface. The offset surfaces of the part surfaces and boundary surfaces are determined to calculate the intersection curves. These intersection curves form a FACE on the part surface, and the interference free tool pathe is generated by eliminating the points outside the FACE when computing the cutter contact (CC) data. Additionally, the cutter location (CL) data obtained from the CC data convert to an NC data. The NC data generated through this algorithm are verified on the CINCINNATI milling machine. A propotype die cavity machining system has been implemented in FORTRAN language and FIGARO graphics library on IRIS workstation.

• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1157-1163
• /
• 2009

CNC 공작기계들을 이용한 품질향상과 생산성 향상을 위하여 2,3축 CNC 공작기계들에 부가축(2축)을 추가하여 생산 공정개선을 위해 노력하고 있다. 일반적인 CNC 공작기계들의 가공공정보다는 가공물의 공정간 이동이 현저히 줄어들기 때문에 생산성 향상과 더불어 정밀도 유지가 향상되기 때문이다. 그런데 기계가공 현장에서는 일반적으로 CAD(2.5D)와 CNC 공작기계의 수동프로그램 작업에 익숙한 작업들이 많다. 따라서 부가축을 추가한 CNC 공작 기계들의 원활한 활용을 위해 CAD/CAM의 VBScript을 활용하여 다축, 다공정 가공프로그램을 편리하게 작성할 수 있도록 한 것이다. VBScript을 컴파일하여 CAD/CAM Software(2.5D)에서 밀링용 Face Cutter의 Insert Tip 자리를 대상으로 수행한 결과 수동 프로그램 작성 시간 단축은 물론 복잡한 Multi CAD/CAM Software보다는 접근성이 편리하며, 다양한 제품들을 빠르게 프로그램 할 수 있었다.

• 대한치과보철학회지
• /
• 제55권4호
• /
• pp.436-443
• /
• 2017

과거의 computer-aided design/computer-aided manufacturing (CAD/CAM) 기술 형태는 사용자가 한 제조사의 구성요소만 사용해야 하는 폐쇄적인 시스템이었다면, 현재는 여러 제조사의 구성요소 중 사용자가 필요에 맞는 구성요소를 선택해서 사용할 수 있는 유연성을 가진 개방적인 시스템 형태로 변화하였다. 치과재료와 보철물 제작 기술의 발전에도 불구하고 의치 제작은 지난 100년 가까이 전통적인 제작방식을 따랐다. 하지만 최근 들어 기존 의치 제작의 단점을 보완하고자 CAD/CAM 제작 의치에 관한 연구가 활발히 이루어지고 있으며, 밀링이나 3D 프린팅을 이용해 상용화된 형태의 CAD/CAM 제작 의치가 이미 임상에서 쓰이고 있다. 본 증례는 3D face scan을 활용한 CAD/CAM 의치 제작의 가능성을 확인하고, CAD/CAM과 전통적인 방법으로 제작한 의치를 비교한 결과에 대해 보고하고자 한다.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.145-152
• /
• 1998

In this research, in order to predict the cutting force using a mechanistic model, specific cutting force was firstly obtained through the cutting experiments. Band sawing process is similar to a milling, that is multi-point cutting. Therefore it is not easy matter to evaluate specific cutting force. Thus, the thickness of workpiec was made smaller than one pitch of the saw in terms of fly cutting in the face milling process. Then the cutting force was predicted by analyzing the geometric shape of a saw tooth The tooth shape used in the research was raker set style that was generally used in band sawing. And a set of teeth is comprised of three teeth, those are ranked as left, straight and right. The mechanistic model was developed in this study considered those shapes of each tooth. From the validation experiments, the predicted cutting forces coincided well with the measured ones. Therefore the predicted cutting forces can be used for the adaptive control of saw engaging feed rate in the band sawing.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.1596-1602
• /
• 2006

대부분의 금형 제작에 있어서 face milling은 가공물의 표면을 매끄럽게 하는 가장 중요한 마무리 공정이다. 이 마무리 단계에서 burr의 형성은 가히 탐탁지 않은 현상중의 하나가 된다. 또한, burr는 가공물의 정밀도를 감소시키고 작업자의 안전에 영향을 미치기 때문에 이를 제거하기 위해 후처리(deburring)과정을 야기 시키며, 불필요한 비용의 발생과 작업의 병목현상을 불러오게 된다. 따라서, burr의 생성 원리를 이해하고 burr의 발생을 최소화 할 수 있는 연구가 필요하게 된다. 이를 바탕으로 deburring의 비용을 줄일 수 있는 최적의 가공계획을 수립해야만 제품의 정밀도를 높일 수 있고, 작업 능률과 생산성을 향상시킬 수 있다. 본 논문에서는 지금까지의 연구보다 좀더 현실적으로 접근하기 위하여 피삭재의 형상이 line, arc, circle, spline 등의 여러 가지 형상으로 복합적으로 이루어진 복합형상에 대하여 burr의 발생을 연구하였고 이에 다중가공 경로까지 고려하여 burr의 형성을 예측할 수 있는 알고리즘을 수립하였다. 더 나아가 본 연구의 궁극적 목적인 burr를 최소로 발생시키는 가공경로를 설계할 수 있는 시스템을 개발하고자 한다

• 센서학회지
• /
• 제31권1호
• /
• pp.57-63
• /
• 2022

This study describes a system that monitors the tool and cutting state of automatic beveling operation in real time. As a signal for cutting state monitoring, a motor current detected from the spindle drive system of the automatic beveling machine is used to monitor abnormal state. Because automatic beveling is processed using a face milling cutter, the cutting force mechanism is the same as the milling process. The predicted cutting torque is obtained using a cutting force model based on specific cutting resistance. Then, the predicted cutting torque is converted into the spindle motor current value, and cutting state stability is diagnosed by comparing it with the motor current value detected during beveling operation. The experimental results show that the spindle motor current can detect abnormal cutting state such as overload and tool wear during beveling operation, and can diagnose the cutting stability using the proposed equip-current line diagram.

• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.67-77
• /
• 1995

In modern industry the requirement of automation of manufacturing process increases so that unmanned system has been popular as an ultimate goal of modern manufacturing process. In unmanned manufacturing process the tool fracture is a very serious problem because it results in the damage of workpieces and can stop the operation of whole manufa- turing system. In this study, image processing technique is used to detect the fracture of insert tip of face milling using multi-point-tool. In order to acquire the image information of fracture shape of rotation insert tip. We set up the optical system using a light beam chopper. In this system we can reduce the image degradation generated from stopped image of rotating insert tip using image restoration technique. We calculated the mean square error to diagnose the condition of tool fracture, and determind the criteria of tool fracture using experimental and staticstical method. From the results of this study we've developed non- contact detection technique of tool fracture using image processing method and proposed the fracture direction of automation and unmanned system considering the optimal time of tool change milling.

• 한국산업융합학회 논문집
• /
• 제14권2호
• /
• pp.45-52
• /
• 2011

Since the most exclusive machines of the modern industries which require the nano precision rates are evolved from the machine tools, the design of the stable machine tool structure is very critical. Exclusive machines for the modern industries such as semiconductor, solar cell and LED have surface machining processes which are similar to the face cutting and grinding of conventional machine tools. This study was initiated to stabilize a milling machine structure and further to help design those exclusive machines which have similar machining mechanisms. The vibrations inherent to the machine tool structures hurt the precision machining as well as damage the longevity of the structures. There have been numerous researches in order to suppress the vibrations of machine tool structures using the extra modules such as actuators and dampers. In this paper, the dynamic properties are analyzed to obtain the natural frequencies and mode shapes of a machine tool structure which reflect the main reasons of the biggest vibrations under the given operating conditions. And the feasibility of improving the stability of the structure without using any additional apparatus has been investigated with minor design changes. The result of the study shows that simple changes based on proper system identification can considerably improve the stability of the machine tool structure.