• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.5
• /
• pp.839-852
• /
• 2023

This study examined personal protective clothing, specifically the D (M, L, XL) and C (L, XL, 2XL) levels with high sales rates. The goal was to collect essential data for developing Korean personal protective clothing. There were eight and twelve patterns for the D-level and C-level, respectively. While the pattern dimensions were similar, the chest and waist circumferences (relaxed) were larger in the C-level, and the waist (extended), hip, upper arm circumference, and total lengths were larger in the D-level. The D-level wear sensation worked well for average-sized Koreans in their twenties, but the C-level caused discomfort in multiple areas, such as the face, arms, armpits, hips, crotch, thighs, and knee during movement. Consequently, this region required pattern adjustments and resetting for improved comfort. The grading rules were 10 cm in the chest, waist, and hip circumference, regardless of the level, with slight differences in other parts depending on the levels. Thus, manufacturers should establish new grading rules to suit the Korean body shape.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.2
• /
• pp.146-152
• /
• 2022

Objectives: The purpose of this study is to confirm whether there is a factor to affect the evaluation of fit test of a 2nd class half masks using a OPC test method. Methods: Total 34 adults including Males and Females were tested using OPC-based fit testing equipment while wearing a 2nd class half filtered mask. Results: 1. The result of measuring face dimensions using different tools such as a 3D scanner and digital calipers revealed that the variation of lip width was not statistically significant because there was only a difference of about 4 mm. However, it showed that a difference in face length was statistically significant enough with 10 mm(p<0.000). 2. The fit factor for each exercise stage according to gender was the highest at 124.54(p<0.001) in Step 3, and the fit factor was the lowest at 73.75 in Step 1. 3. In the evaluation of the degree of fit factor according to gender, female passed 67.44%, which was higher than the value in male(p<0.038). 4. The acceptance rate of the group having a face length of shorter than 110 mm was 91.67%. On the other hand, the acceptance rate of the group with a face length of longer than 110 mm was 47.27%(p<0.000). 5. The fit test was possible because the fit factor with 2nd class half masks corresponding to FFP1(Filtering Face Piece 1) was passed 55% or more. Conclusions: The test results showed that using a 2nd class half filtered mask, it is important to wear a properly designed mask so that face size does not affect the fit factor.

• Korean Journal of Culture and Social Issue
• /
• v.10 no.1
• /
• pp.1-30
• /
• 2004

Study 1 composed of three experiments examined differences in person perception between computer-mediated (or CMC) and face-to-face (or FTF) communications. In Experiment 1, each of 17 groups of 4-5 discussed a donation entrance system through CMC and a week later a college-based university system through FTF communication mode for half an hour. Then members of a given group rated each other along with self-ratings on five personality traits. Results indicated that in FTF than CMC condition, ratings of others were more positive and also self-peer agreement and meta-accuracy were larger in spite of no large difference in inter-judge agreement between two communication modes. In Experiment 2, 17 groups of 4 in each of the CMC and FTF condition discussed a college-based university system for an hour. Then group members rated each other on another five trait dimensions. Although ratings of others were more positive in FTF than CMC condition, there no systematic differences in two types of agreement and meta-accuracy between the two communication modes. In Experiment 3, 17 groups of 4 in each of the CMC and FTF condition discussed a donation entrance system for an hour and then group members rated each other on five trait dimensions different from those used in Experiment 1 and 2. The findings replicated Experiment 1. Study 2 examined gender differences in person perception in CMC. Fifteen dyads for each of the man-man, man-woman, and man-woman conditions communicated for an half hour in CMC and then rated each other along with self ratings on 25 personality trait dimensions. Results indicated that participants rated their partners more negatively for extorversion, agreeableness and culture factors, which was due mainly to woman's negative evaluations for their male partners. Also, self-peer agreement was the largest in the man-man communication condition. These findings were discussed in relation to differences between CMC and FTF communication modes.

• Journal of KIISE
• /
• v.44 no.7
• /
• pp.692-702
• /
• 2017

Face detection using the LBP based feature descriptor has issues in that it can not represent spatial information between facial shape and facial components such as eyes, nose and mouth. To address these issues, in previous research, a facial image was divided into a number of square sub-regions. However, since the sub-regions are divided into different numbers and sizes, the division criteria of the sub-region suitable for the database used in the experiment is ambiguous, the dimension of the LBP histogram increases in proportion to the number of sub-regions and as the number of sub-regions increases, the sensitivity to facial orientation rotation increases significantly. In this paper, we present a novel facial region segmentation method that can solve in-plane rotation issues associated with LBP based feature descriptors and the number of dimensions of feature descriptors. As a result, the proposed method showed detection accuracy of 99.0278% from a single facial image rotated in orientation.

• Structural Engineering and Mechanics
• /
• v.69 no.4
• /
• pp.439-455
• /
• 2019

This research deals with thermo-electro-mechanical buckling analysis of the sandwich nano-beams with face-sheets made of functionally graded carbon nano-tubes reinforcement composite (FG-CNTRC) based on the nonlocal strain gradient elasticity theory (NSGET) considering various higher-order shear deformation beam theories (HSDBT). The sandwich nano-beam with FG-CNTRC face-sheets is subjected to thermal and electrical loads while is resting on Pasternak's foundation. It is assumed that the material properties of the face-sheets change continuously along the thickness direction according to different patterns for CNTs distribution. In order to include coupling of strain and electrical field in equation of motion, the nonlocal non-classical nano-beam model contains piezoelectric effect. The governing equations of motion are derived using Hamilton principle based on HSDBTs and NSGET. The differential quadrature method (DQM) is used to calculate the mechanical buckling loads of sandwich nano-beam as well as critical voltage and temperature rising. After verification with validated reference, comprehensive numerical results are presented to investigate the influence of important parameters such as various HSDBTs, length scale parameter (strain gradient parameter), the nonlocal parameter, the CNTs volume fraction, Pasternak's foundation coefficients, various boundary conditions, the CNTs efficiency parameter and geometric dimensions on the buckling behaviors of FG sandwich nano-beam. The numerical results indicate that, the amounts of the mechanical critical load calculated by PSDBT and TSDBT approximately have same values as well as ESDBT and ASDBT. Also, it is worthy noted that buckling load calculated by aforementioned theories is nearly smaller than buckling load estimated by FSDBT. Also, similar aforementioned structure is used to building the nano/micro oscillators.

• Structural Engineering and Mechanics
• /
• v.85 no.5
• /
• pp.635-644
• /
• 2023

The design of honeycomb sandwich structures is often challenging because these structures can be tailored from a variety of possible cores and face sheets configurations, therefore, the design of sandwich structures is characterized as a time-consuming and complex task. A data-driven computational approach that integrates the analytical method and Artificial Neural Network (ANN) is developed by the authors to rapidly predict the design of sandwich structures for a targeted maximum structural deflection. The elaborated ANN reverse design approach is applied to obtain the thickness of the sandwich core, the thickness of the laminated face sheets, and safety factors for composite sandwich structure. The required data for building ANN model were obtained using the governing equations of sandwich components in conjunction with the Monte Carlo Method. Then, the functional relationship between the input and output features was created using the neural network Backpropagation (BP) algorithm. The input variables were the dimensions of the sandwich structure, the applied load, the core density, and the maximum deflection, which was the reverse input given by the designer. The outstanding performance of reverse ANN model revealed through a low value of mean square error (MSE) together with the coefficient of determination (R2) close to the unity. Furthermore, the output of the model was in good agreement with the analytical solution with a maximum error 4.7%. The combination of reverse concept and ANN may provide a potentially novel approach in designing of sandwich structures. The main added value of this study is the elaboration of a reverse ANN model, which provides a low computational technique as well as savestime in the design or redesign of sandwich structures compared to analytical and finite element approaches.

• Journal of the Korean Home Economics Association
• /
• v.37 no.7
• /
• pp.127-141
• /
• 1999

The purpose of this study is to classify the elderly over the age of 60 according to their lifestyles and analyze the health and economic status of them that are classified. Data were obtained from 463 elderly living in urban areas. Factor analysis was used for examining dimensions of lifestyles and cluster analysis for classifying the elderly by lifestyles. This study found six different types of lifestyles, Le., the actively self-developing type, the individualist seeing the negative aspects of the world, the sensuous joy oriented type, the obedient to the tradition type, the conservative with discontented attitude toward the world, and the introspective self-fulfilling type. There were significant differences in living status as well as socio-economic characteristics of the elderly among six types of lifestyles. From the results of this study, it is found that the elderly have various lifestyles and, therefore, the understanding the lifestyles of the elderly will enable researchers to capture the problems the elderly face and provide more insight into their living status.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.1
• /
• pp.83-89
• /
• 2002

In the present study, heat transfer characteristics of oil flow over offset strip fins were predicted by the numerical methods. Oil flow in the plate-fin passage was idealized by 2 dimensions. The flow patterns and heat transfer characteristics were predicted in details. Numerical results shows that the average convective heat transfer coefficients are almost independent on the raws of fins and affected by fin pitches. At the rear face of fin, there exists minimum point of heat transfer coefficients where stream are separated from the fin surfaces. The convective heat transfer coefficients were effected by separation bubbies which appeared at the wake region of offset strip fins.

• The korean journal of orthodontics
• /
• v.12 no.2
• /
• pp.127-138
• /
• 1982

The present study was performed to establish the cephalometric norms and to study characteristics of craniofacial skeleton of Korean male and female with normal occlusion. The author studied and analyzed statistically vertical cephalometric measurements of the 52 adult male ranging in age from 18 to 26 years and 43 adult female ranging in age from 16 to 30 years with normal occlusion and acceptable profile. The results were as follows; 1. Cephalometric craniofacial norms and standard deviation chart were abtained about adult Korean male and female with normal occlusion. 2. Vertical dimensions of the craniofacial skeleton were larger in male than in female. 3. Lower face was more divergent in female than in male. 4. In simple correlation coefficients between vertical linear mesurements in male and female, high correlation were shown between ATFH and ALFH, PTFH and PLFH, ALFH and ALDH, PLFH and PLDH.

• Journal of the Korean Home Economics Association
• /
• v.39 no.12
• /
• pp.205-224
• /
• 2001

This article presents the development of a self-report measure of Korean Marital Satisfaction Scale. Based on 'Family Process Model'and interviews with 183 married couple, 3 domain structures with 74 items were identified, which included interactional process, emotional process, and intellectual process. It was administerd to 289 couples to test reliability and validity. Overall reliability coefficients were high for each of the individual domains($\alpha$=.62 to $\alpha$=.93). Face validity, content validity, content validity and concurrent validity respectively were demonstrated good. Additionally, divergent validity with scales of self-esteem and depression was observed. These results support the reliability and psychometric validity of the Korean Marital Satisfaction Scale in the assessment of key dimensions of marital process of Korean couples.