• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.185-189
• /
• 2005

For the simultaneous measurement of strain and vibration signal, a fiber Bragg grating sensor system with a dual demodulator was proposed. One demodulator using a tunable Fabry-Perot filter could measure low-frequency signal such as strain and the other demodulator using a coarse wavelength division multiplexer could detect high-frequency signal such as vibration signal using intensity demodulation method. In order to measure strain and vibration of the composite main wing model under static loading a real time monitoring program was developed. Also using intensity demodulation of CWDM, sensitivity and resolution at high frequency vibration were evaluated.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.370-375
• /
• 2003

Optical fiber vibrations sensors (OFVSs) and extrinsic Fabry-Perot interferometer (EFPI) were used in damage monitoring of fiber-metal laminates(FML). The optical fiber vibration sensor and EFPI were applied in order to detect and evaluate the strain, damage and failure of FML. Damages in composites, such as matrix cracks, delamination and fiber breakage may occur as a result of excessive load, fatigue and low-velocity impacts. Tensile and indentation test was performed with the measurement of optical signal and acoustic emission (AE). The signals of the optical fiber vibration sensor due to damages were quantitatively evaluated by wavelet transform. It was found that damage information of comparable in quality to acoustic emission data could be obtained from the optical fiber vibration sensor signals.

• Journal of IKEEE
• /
• v.11 no.3
• /
• pp.117-121
• /
• 2007

20 GHz and 40 GHz micro/millimeter-wave photonic pulse trains have been generated from a fiber ring laser with a semiconductor optical amplifier (SOA) by injecting 2 GHz gain-switched Fabry-Perot laser diode (GS-FPLD) output. To achieve efficient cross-gain modulation in the SOA at 20 GHz and 40 GHz, individual lasing modes of the 2 GHz GS-FPLD output separated to 25 and 50 picoseconds respectively by passing dispersion compensating fibers.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.451-460
• /
• 2003

In this paper, high speed fiber optic sensor weigh-in motion (WIM) system is proposed. Bragg gratings which have several advantages such as good reproducibility and good multiplicity compare to other optical fiber sensors are used for the system. Fabry-Perot filter for the signal process, which cannot be used in the high speed measurement because of the limitation in fast operation of PZT, is excluded. A new signal processing system which employs bandwidth filter is proposed and bridge type new sensor package design is also proposed. Design of the mold supporter is modified to round shape and then supporting points do not change. The data from the fiber sensors show identical and linear behavior to the axle weight. The proposed fiber optic WIM system is tested in the laboratory and experimented with actual trucks. The new concept of calibration is introduced and calculated by the experiments. The calibrated weight data show good approximations to real axial weights regardless the velocities of the truck.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.318-319
• /
• 2000

1987년에 Tang과 VanSlyke가 유기발광물질중의 하나인 8-hydroxyquinoline aluminum(Alq$_3$)을 사용하여 유기발광소자의 특성[1]을 발표하였으며, 1990년에 영국의 Cambridge대학 Cavendish 연구소는 Poly(p-phenylene vinylene)[2]를 이용한 고분자 발광소자의 특성을 보고하였다. 저분자와 고분자를 이용한 이 두 편의 논문은 낮은 인가전압, 높은 형광효율, 반도체의 성격을 보고하고 있다. 이와 같은 특성들은 실질적인 전기 발광소자에 대한 적용 가능성 및 대형 디스플레이에 대한 개발 잠재력[3]을 시사하고 있다. 특히 본 연구에 사용된 Fabry-Perot 공진기 형태의 광학적 미세공동구조는[4,5] 발광파장을 조절할 수 있을 뿐만 아니라 에너지 재분포로 인해 발광세기를 향상시킬 수 있다는 점에서 다른 EL소자들이 가지는 일반적인 구조와 대조되는 장점을 가지고 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.363-364
• /
• 2009

본 논문에서는 Z-cut Congruent $LiNbO_3$ 패브리-페롯 에탈론에서 다중빔간섭에 의한 간섭무늬의 위상변화 분석을 이용한 넓은 파장영역에서의 전기광학계수 ${r^T}_{13}$ 측정방법을 소개한다. 광통신파장 영역의 넓은 파장대역을 갖는 SLD를 광원으로 사용하여 전기광학계수의 분산을 측정하였으며 마하젠더 간섭계 구조에서 벌크형태의 샘플로 측정한 결과 값과 비교하였다.

• Journal of the Optical Society of Korea
• /
• v.18 no.4
• /
• pp.406-413
• /
• 2014

An optical true-time delay beam-forming system using a tunable dispersion compensating module (DCM) for dense-wavelength division modulation (DWDM) and a multiwavelength fiber ring laser for a phased array antenna is proposed. The multiwavelength fiber ring laser has one output that includes four wavelengths; and four outputs that include only single-wavelength. The advantage of such a multiwavelength fiber ring laser is that it minimizes the number of devices in the phased array antenna system. The time delays according to wavelengths, which are assigned for each antenna element, are obtained from the tunable DCM. The tunable DCM based on a temperature adjustable Fabry-Perot etalon is used. As an experimental result, a DCM could be used to obtain the change of the beam angle by adjusting the dispersion value of the DCM at the fixed lasing wavelengths of the fiber ring laser in the proposed optical true-time delay.

• Journal of Sensor Science and Technology
• /
• v.29 no.1
• /
• pp.51-58
• /
• 2020

In this study, a novel method for sweeping automatic linearization of wavelength swept laser is proposed. Through the test performed on the implemented laser, the linear sweeping is held up well with a 97% decrease in nonlinearity, and 60 nm sweeping range, 1 kHz sweeping frequency, and 8.8 mW average optical power were obtained. The proposed method uses fiber Bragg grating array, optical-electronic conversion circuit, FPGA embedded module, and a LabVIEW program to generate new compensated wave patterns which were applied to the fiber Fabry-Perot tunable filter. Linear sweeping can reduce the cumbersome and time-consuming recalibration process required for nonlinear sweeping. Additionally, the proposed method provides more accurate measurement results for the structure safety monitoring system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.459-464
• /
• 2001

Vibration control of a plate using an optical fiber sensor and a PZT actuator is considered in this study. An aluminum plate with attached Extrinsic Fabry-Perot Interferometer (EFPI) and PZT actuator is prepared for experimental investigation. Vibration level of EFPI that can represent the mechanical strain without severe distortion is validated by forced vibration experiment. A numerical model of the plate is constructed based on the experimentally obtained frequency responses, and an optimal controller is designed for the multi-modal vibration suppression. It is found that the vibration level of the first three modes can be greatly reduced. The effect of low-pass filtering used to eliminate high frequency noise on the stability and control performance is also considered.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.568-574
• /
• 2004

On-line phase tracking of an extrinsic Fabry-Perot interferometer (EFPI) and experimental vibration control of a composite beam with a sensing-patch are investigated. We propose a sensing-patch for the compensation of the interferometric non-linearity. In this paper, a sensing-patch that comprises an EFPI and a piezo ceramic(PZT) is fabricated and the characteristics of the sensing-patch are experimentally investigated. A simple and practical logic is applied for the real-time tracking of optical phase of an interferometer. Experimental results show that the proposed sensing-patch does not have the non-linear behavior of conventional EFPI and hysteresis of piezoelectric material. Moreover, it has good strain resolution and wide dynamic sensing range. Finally, the vibration control with the developed sensing-patch has been performed using Fuzzy logic controller, and the possibility of sensing-patch as a sensoriactuator is considered.