• The Korean Journal of Community Living Science
• /
• v.18 no.1
• /
• pp.39-53
• /
• 2007

The purpose of this study was to determine the characteristics of an experimental protective clothing material with regard to comfort and isolation from the hazardous heavy metals produced in municipal waste incineration. An analysis was conducted on the total concentrations of heavy metals in some parts such as surface, middle layer, and interior for the treated fabric, and the untreated one, and working clothes. We conclude that the processed fabric with charcoal for working clothes showed the least exposure to heavy metals of the three. Working clothes worn by workers during waste incineration were much more contaminated than the untreated and treated materials. The material of working clothes could be chosen according to the function with regard to its original chemical characteristics, which are the proper results of the dyeing process. The processed fabric material has high degrees of moisture regain, thermal insulation, water vapor penetration, and antibacterial function; consequently, it is much more comfortable to wear. The fabric material proposed in this research contributed much more to blocking heavy metal concentrations (such as Cd, Pb, Cu, Cr, Zn, Mn) than did the fabric of working clothes at present. Consequently, we strongly suggest that the material of working clothes be upgraded by adopting the above-mentioned charcoal-processed fabric. Materials of working clothes must be improved to increase comfort and prevent harmful gas, flying dust, and heavy metals from permeating the fabrics.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.60-64
• /
• 2001

In this paper, the tension-compression fatigue test method and the fatigue life characteristics of carbon fabric/epoxy laminate coupon are presented. To avoid the buckling during the compression, a proper design for the test coupons is essential. The critical buckling loads for the coupons are calculated by assuming the coupons as columns under two types of fixed conditions. The first is that both ends of each coupon are perfectly clamped, the second is that both ends of each coupon are simply supported. The strain-load curves are obtained by compressing the representative coupons, on each surface of which a strain gage is attached. The buckling loads obtained from the tests are all between the two calculated critical buckling loads. All the coupons are broken by the compression during the fatigue tests. It is estimated to be the reason that the fatigue load causes delamination before the eventual failure of each coupon, and sequentially the micro-buckling in the delaminated region drives each coupon into fatigue failure during the compression. The S-N curve, the fatigue life characteristics of carbon fabric/epoxy is obtained.

• Fashion & Textile Research Journal
• /
• v.4 no.3
• /
• pp.273-283
• /
• 2002

In this study, the correlations of the two frictional testers have been investigated; one is the KES-FB4 system, the other is the Fabric-on-Fabric Frictional tester which was devised by authors. According to the results, the correlation between the frictional coefficients measured by the two testers has been shown highly as the load increased. But the effect of roughness of fabric surface was not dearly revealed in this study. The frictional characteristics of fabric woven from filament yarns were different with those of fabric woven from spun yarns. And, like the other materials, the effect of load on fabrics used in this experiment was related with the frictional force between two fabrics. The frictional behaviors, however, were obviously different with harder material because the frictional coefficients were not constant as the load increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.6
• /
• pp.583-591
• /
• 2012

This study selected three model designs used for air injection type welding clothes designed for insulation purposes and analyzed the performance of each design. The bending characteristics were analyzed in order to identify the flexibility of the welded areas; subsequently, the seam breaking strength and water pressure resistance were analyzed to identify the bonding strength. In addition, two types of waterproof fabric, polyurethane (PU) coated 2 layer and PU laminated 2 layer fabrics, were used for a performance analysis, according to fabric processing specifications. The circle type showed the highest flexibility in the terms of bending characteristics that influence wearability and were followed by the wave and the straight type. In terms of breaking strength, the straight type showed the highest breaking strength, followed by the wave and the circle type. The water pressure resistance analysis found that the wave type was superior to the straight type in terms of water pressure resistance. The wave type is deemed to be a design type suitable for maximizing performance, provided that the issue of stabilization in the welding production process is addressed. Looking at the bending characteristics of waterproof fabric for each specification, the laminating waterproof cloth outperformed the coated waterproof cloth in terms of flexibility. However, in terms of seam breaking strength, the coated waterproof cloth outperformed the laminated cloth. In contrast, the water pressure resistance of the laminated waterproof fabric was found to be higher than the coated waterproof fabric, leading to the conclusion that the bonding strength of the laminated waterproof fabric is higher than that of the coated waterproof fabric based on the assumption of injecting air.

• Fibers and Polymers
• /
• v.4 no.2
• /
• pp.71-76
• /
• 2003

We evaluated the seam characteristics with finishing, seaming and sealing processes and seam Puckering behavior of the breathable waterproof fabrics with laser scan. There were differences in 99% significant level between the seamed fabric and the sealed fabric. Seam breakage was initiated with the breakage of sewing thread, so the seam strength after seaming was almost uniform. The sewn seam strength and elongation increased with sealing process in all finishing methods. Pucker grade of laminating type was generally much higher than that of the coating type. We confirmed that wave length and amplitude have more important meaning than the number of weave in the breathable waterproof fabrics. The puckering in breathable waterproof fabrics is mainly occurred by inherent and feeding pucker. The former if due to the insertion of sewing thread and the littler is caused by differential feeding when two pieces of fabric are fed into the gap between a press foot and needle plate.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.2
• /
• pp.355-363
• /
• 2002

The purpose of this study was to investigate how the weave type, yarn twist fabric count and fiber content of the worsted fabrics affect the subjective sensation of the hand. Thirty worsted fabrics that were mainly used for the spring and fall ladies'suits at national brands were selected. Variables were such as four different kinds of weave types, plain, twill, satin and decorative; two levels of yarn twist, normal and high; various fabric counts; two different fiber contents, pure wool and Lycra contained. Image analysis and wavelet transform techniques were used to quantify the surface fiber, For surface characteristics, MIU, MMD and SMD were measured by KES-FB system. The Questionnaires with 23 adjectives were used for the subjective hand evaluation. Panels were So specialists of fashion or fabric designers and merchandizers. By Factor Analysis, six factors that represent the subjective hand were extracted. The relationship between these factors and structural variables were analyzed. Yarn twist was significantly related to the surface characteristics and resilience. Weave structure affected surface characteristics, volume/warm-cool feeling and resilience. Fabric counts showed relations with volume/warm-cool feeling and the fiber contents with volume/warm-cool feeling, resilience and elastic properties. MIU, MMD and SMD showed no relations with the surface fibers. Subjective sensation of surface characteristics was affected by SMD and surface fibers.

• Journal of the Korean Society of Costume
• /
• v.58 no.6
• /
• pp.24-34
• /
• 2008

The purpose of this study was to create a database of information on fabric factors(i.e., fabric insulation, fabric weight, clothing weight, fabric thickness, air permeability, and water vapor resistance) of clothing used for insulations, to compare them according to clothing types, and to estimate thermal resistance of clothing using these factors. A total of 25 kinds of clothing were selected(9 types for suits, 6 types of jacket, 5 types for shirts, and 5 types for trousers). The results of this study were as follows; Thermal insulation of clothing showed the highest positive correlation(0.85, p>0.01) with thermal insulation of fabric and very high positive correlation with water vapor resistance, fabric thickness, fabric weight, and clothing weight, respectively, 0.77, 0.77, 0.73, 0.71(p>0.01). Fabric weight of jacket was higher than that of shirts and trousers. Air permeability of shirts was the highest of clothing types. Clothing insulation of jacket was higher than that of shirts and trousers and its fabric insulation was also the highest of clothing types. Regression analysis showed that fabric thickness, water vapor resistance, and fabric weight would be useful factors for estimating the thermal resistance of clothing.

• Journal of Fashion Business
• /
• v.3 no.3
• /
• pp.69-78
• /
• 1999

The purpose of this thesis is to investigate of fabric characteristics in women's wear as reviewing the fabric trends in 1990's domestic fashion. As a method to accomplish this research, I have examined the articles related to fashion fabric and fashion trend magerzines. This study considered women's wear relatively used diverse fabrics, there was not previous study regarding the fabrics used in domestic, since the 1990's. The social fators for the 1990's fashion were the influence of the informed, the increased concern for the ecological environment, the sattlement of young popular culture, the increase of resonable consume and social anxiety. To understand the fashion trends of the 1990's women's wear, it is divided three periods. The traditional period is from 1991 to 1993, the mixed period of the naturalism and the technology is from 1994 to 1995, the retro period is from 1996 to 1999. The charateristics of the fabrics used in 1990's women's wear were the appearance of various functional fabrics, the development of new synthetic fabric with high sensitivity, the popularization of circular knit, the fabrics with a retro mood toward traditional feminine mood and the blending of fabrics. The fashion of 1990 have had the characteristics of various utilization of the materials on the base of reasonable and practical trends than the changes of design and detail.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.5
• /
• pp.810-823
• /
• 2020

This study evaluated the effect of functional characteristics of the fabric for Bikram yoga clothing and fit measured in clothing pressure on the wearer's physiological response and perceptive sensation before and after exercise in hot conditions and during a resting period in standard conditions. The test garment consisted of two tops (T1, T2) and two pants (P1, P2) each with different functional characteristics of fabric. Using various combinations of the test garments, assessment of the thermal sensation and comfort was performed before/after yoga and after resting. This study revealed that thermal sensation and wearing comfort significantly changed based on the functionality of the fabric of top garment before the exercise period. In addition, the results showed that based on clothing pressure, the feeling of comfort was different between before yoga and after resting. The appropriate choice of fabric material was important when constructing Bikram yoga clothing worn in hot conditions; however, level of clothing pressure was also found to be an essential design factor for comfort during rest after exercise.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.12 s.159
• /
• pp.1683-1689
• /
• 2006

Precedent researches on lyocell are mostly on lyocell structure, characteristics, physical properties by finishing and dyeability, and the like; there are little cases of researches on interlining for lyocell clothes production. To serve as a base information helpful to select fusible interlining and improve the efficiency of sewing process considering the characteristics of lyocell, this study performed t-est, F-test toward to the difference in the appearance-related properties and the mechanical properties of lyocell-interlining bonded fabric in accordance with the characteristics of fusible interlining and lyocell face fabric. This study reached following conclusions. Drapability and Crease recovery of lyocell-interlining bonded fabric are influenced by the structure of fusible interlining; stiffness of lyocell-interlining bonded fabric, by the structure of fusible interlining and the yam number of lyocell face fabric. WT is influenced by the mixture rate and yam number of lyocell face fabric. RT is influenced by the yam number of lyocell face fabric; G, 2HG, 2HG5, by the structure(woven and non-woven) of fusible interlining; B, HB, by the weight, structure(woven and non-woven) of fusible interlining, and yam number of lyocell face fabric; WC, by the weight, structure of fusible interlining; RC, by the structure of fusible interlining; thickness, by the weight of fusible interlining and the yarn number of lyocell face fabric; weight, by mixture rate and yam number of lyocell face fabric.