• 한국미생물·생명공학회지
• /
• 제27권6호
• /
• pp.466-470
• /
• 1999

Protease production and its characteristics were investigated with Mucor racemosus f. racemosus PDA 103 which was isolated from Korean traditional meju. Optimum culture conditions of the strain for the production of the protease in basic medium[bean(Baektae):H2O=1:1(w/v)] were as follows: pH 6, 3$0^{\circ}C$ and 72hrs. Optimum pH and temperature for the enzyme activity of the protease produced by Mucor racemosus f. racemosus were pH 5 and 5$0^{\circ}C$, respectively. The enzyme was relatively stable a pH2.0~5.0 and at temperature below 4$0^{\circ}C$. Phenylmethane-sulfonyl fluoride and Ag+ inhibited the enzyme activity. This indicates that the enzyme is serine protease. Km value was 0.9$\times$10-4M and Vmax value was 5.93$\mu\textrm{g}$/min. This enzyme hydrolyzed casein more rapidly than bovine albumin.

• BMB Reports
• /
• 제28권1호
• /
• pp.62-67
• /
• 1995

Thioredoxin f from pea leaves was purified to homogeneity and characterized. The purification steps involved ammonium sulfate fractionation, heat treatment, Sephadex G-75 and G-50 gel filtration, and hydroxyapatite and DEAE ion exchange chromatography. The monomeric molecular weight of purified pea thioredoxin f determined by SDS polyacrylamide gel electrophoresis was 12,000. The purified protein was active in the presence of reducing agents, such as dithiothreitol, at an alkaline pH (7.8~8.5). It was stable against heat such that more than 40% of its maximum activity remained after treatment at $90^{\circ}C$ for 10 min. Pea thioredoxin f was able to reduce insulin and was specific only to pea chloroplast fructose-1,6-bisphosphatase.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.244-244
• /
• 2012

Polymer memory devices have attracted considerable attention because of their advantages such as low cost potential, good scalability, flexibility, simplicity in structure, and large capacity for data storage. Metal/poly (4,4'-aminotriphenylene hexafluoroisopropylidenediphthalimide) (6F-TPA PI)/metal system has been found to show an electrical bi-stable behavior. Here, we show a novel set-up of 6F-TPA PI/Al sample in which holes are injected by photoelectron emission process instead of direct charge carrier injection via metal electrode. In this process, an irreversible electrical phase transition of 6F-TPA PI is found, leading to a write-once-read-many (WORM) behavior. The photoelectron spectroscopy results measured before and after the switching process revealed that the irreversible electrical phase transition of 6F-TPA PI is attributed to the chemical modification of the carbonyl group in phthalimide moiety.

• 한국분말재료학회지
• /
• 제30권6호
• /
• pp.516-520
• /
• 2023

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO₄ is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO₄O has two redox reactions (V⁵⁺/V⁴⁺/V³⁺) but low electrochemical activity. In this study, LiVPO₄O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO₄O_1-xF_x, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

• 상하수도학회지
• /
• 제11권1호
• /
• pp.33-41
• /
• 1997

An attempt was made to enhance anaerobic treatment efficiency by adopting the anaerobic sequencing batch reactor(ASBR) process at a thermophilic temperature. Operational characteristics of the ASBR process were studied using laboratory scale reactors and concentrated organic wastewater composed of soluble starch and essential nutrients. Effects of fill to react ratio (F/R) were examined in the Phase I experiment, where the equivalent hydraulic retention time(HRT) was maintained at 5 days with the influent COD of 10g/L. A continuous stirred tank reactor(CSTR) was operated in parallel as a reference. Treatment efficiency was higher for the ASBRs because of continuous accumulation of volatile suspended solids(VSS) compared to the CSTR. However, the rate of gas production and organic removal per unit VSS in the ASBRs was much lower than the CSTR. This was caused by reduced methane fermentation due to accumulation of volatile acids(VA), especially for the case of low F/R, during the fill period. When the F/R was high, maximum VA was low and the VA decreased in short period. Consequently, more stable operation was possible with higher F/R. Effects of hydraulic loading rate on the efficiency was studied in the Phase II experiment, where the organic loading rate was elevated to 3333mg/L-d with the F/R of 0.12. Reduction of organic removal along with rapid increase of VA was observed and the stability of reaction was seriously impaired, when the influent COD was doubled. However, operation of the ASBR was quite stable, when the hydraulic loading rate was doubled and a cycle time was adjusted to 12 hour. It is essential to avoid rapid accumulation of VA during the fill period in order to maintain operational stability of the ASBR.

• 한국진공학회지
• /
• 제5권4호
• /
• pp.315-326
• /
• 1996

광전자분광 실험방법을 이용하여 희토류(Sm, Eu, Gd, 및 Tb) 화합물 부도체들의 희토류 원소의 3d와 4d 전자의 내각준위의 스펙트럼들을 연구했다. $La_2O_3,\;Ce_2O_3$ 등과 같은 가벼운 희토류 화합물 부도체의 경우와는 달리 Sm 이상의 무거운 희토류 화합물들의 경우는 란탄족 수축(lantanide contraction) 현상에 의한 희토류 원소의 f 전자와 음이온의 p 전자사이의 혼성의 크기가 줄어들면서 이 혼성에 의한 위성구조가 존재하지 않는 것을 알 수 있었다. 또한 Eu 부도체의 안정된 +3가의 화합물들에서 보이는 위성구조는 표면의 전자구조가 덩어리와는 다른 +2가의 전자가를 갖기 때문이라는 것을 밝혔다. 그리고 Eu 3d 전자의 내각준위의 주요 피크에 대하여 대략 10eV보다 큰 결합에너지 영역에 존재하는 위성구조는 $\underline{3d}4f^6$ 전자구조의 여러겹 효과에 의한 것으로 추정된다. 이러한 여러겹 효과는 Gd 부도체 화합물에서도 역시 발견할 수 있는데, Gd 3d 전자의 내각준위의 스펙트럼에의 위성구조는 $\underline{3d}4f^6$ 전자구조의 여러겹 효과에 의한 것이다. 모든 희토류 부도체 화합물들의 3d 전자의 내각준위의 스펙트럼에서 주요 피크에 대하여 대략 15eV보다 큰 결합에너지 영역에서 보이는 위성구조는 플라즈몬을 생성해서 에너지를 잃는 과정에서 발생하는 것이다.

• Mass Spectrometry Letters
• /
• 제1권1호
• /
• pp.9-12
• /
• 2010

Trimethylboroxine (TMB) is a six-membered ring compound containing Lewis acidic boron and Lewis basic oxygen atoms that can bind halide anion and alkali metal cation, respectively. We employed Fourier transform ion cyclotron resonance spectroscopy to study the gas-phase binding of $LiBrLi^+$ and $F^-(KF)_2$ to TMB. TMB forms association complexes with both $LiBrLi^+$ and $F^-(KF)_2$ at room temperature, providing direct evidence for the ditopic binding. Interestingly, the $TMB{\cdot}F^-(KF)_2$ anion complex is formed 33 times faster than the $TMB{\cdot}Li^+BrLi$ cation complex. To gain insight into the ditopic binding of an ion pair, we examined the structures and energetics of $TMB{\cdot}Li^+$, $TMB{\cdot}F^-$, $TMB{\cdot}LiF$ (the contact ion pair), and $Li^+{\cdot}TMB{\cdot}F^-$ (the separated ion pair) using Hartree-Fock and density functional theory. Theory suggests that $F^-$ binds more strongly to TMB than $Li^+$ and the contact ion-pair binding ($TMB{\cdot}LiF$) is more stable than the separated ion-pair binding ($Li^+{\cdot}TMB{\cdot}F^-$).

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.219-222
• /
• 2002

A new designed composite archery bow limbs are developed in this study. The characteristic F-X curve in current recurve archery bow is first studied for a reference. Based on this, a composite archery bow is designed to obtain a higher strain Energy and good vibration performance. Carbon/Epoxy prototype archery bow limbs are made from autoclaving and test on INSTRON 5567 test machine. The experimental results show that the new designed archery bow is powerful and stable.

• 충청수학회지
• /
• 제29권1호
• /
• pp.1-11
• /
• 2016

This paper shows that the solutions to nonlinear perturbed functional differential system $$y^{\prime}=f(t,y)+{\int}^t_{t_0}g(s,y(s),Ty(s))ds+h(t,y(t))$$ have the asymptotic property by imposing conditions on the perturbed part ${\int}^t_{t_0}g(s,y(s),Ty(s))ds,h(t,y(t))$ and on the fundamental matrix of the unperturbed system y' = f(t, y).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.97-100
• /
• 2009

A negative waveform was studied to improve the driving characteristics of reset and address periods in ac PDP. Comparative experiments between negative and conventional positive waveforms were performed with 42-inch XGA PDP module. The negative waveform showed lower breakdown voltage than the conventional positive waveform in reset period. Due to its weak and stable discharge during reset period, the contrast ratio was improved by decreasing the black luminance. During address period, the discharge time-lag was measured. The formative time lag ($=T_f$) of negative waveform was improved about 22.8% than $T_f$ of conventional positive waveform.