• Development and Reproduction
• /
• v.18 no.2
• /
• pp.79-87
• /
• 2014

In Pleuronectiformes, blind-side malpigmentation (hypermelanosis) is common in cultured flatfishes, and is economically important. To understand the mechanism of blind-side hypermelanosis in flatfishes, we examined when the malpigmentation initially occurred, and studied how the symptoms proceeded during early development of the starry flounder, Platichthys stellatus. To assess quantitative pattern changes of blind-side skin, we observed morphological development of the whole body from 22 (total length [TL] $10.0{\pm}0.2$ mm and body weight [BW] $8.8{\pm}0.57$ mg) to 110 days (TL $23.4{\pm}0.7$ mm, BW $193.6{\pm}23.3$ mg) after hatching (DAH), and also examined the malpigmented area rate of blind-side skin and the malpigmented fish ratios. The experimental animals were reared in fiberglass-reinforced plastic (FRP) tanks in water at a temperature of $18.9{\pm}1.9^{\circ}C$ and salinity of $32.6{\pm}0.6$ psu and were fed with rotifer and Artemia nauplii from 22 to 48 DAH, and with A. nauplii and commercial feed from 49 to 110 DAH. As results, the first staining patch seen by the naked eye was observed around the area between the anus and pelvic fin or caudal edge of the trunk at 80 DAH (TL $20.6{\pm}0.5$ mm, BW $112.5{\pm}8.8$ mg). The pigmented area and the pigmented fish ratios were significantly increased from 80 to 110 DAH. These results indicated that malpigmentation on the blind side of starry flounder was initially observed at about 2 cm in length and 100 mg in weight, and the pigmented domain on the blind-side skin was continually broadened by the differentiation of pigmented cells (melanophores and xanthophores) with growth.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.95-99
• /
• 2002

To investigate the manual procedure for custom fitting of ocular prosthesis and the cytotoxicity induced by extract solution of prosthetic eye, this study was performed. These procedures included the trial fitting of the wax model, impression molding, the an of iris color duplication, sclera mold made from the prosthetic wax model, scleral tints and vascular pattern, finishing and polishing. Inhibition of cell growth for extract solution was measured by MTT assay. Extract solution did not show the cytotoxicity. This study suggests that the manual procedure for custom fitting of ocular prosthesis is good for education of students.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.393-393
• /
• 2012

Optically active nanostructures such as subwavelength moth-eye antireflective structures or surface enhanced Raman spectroscopy (SERS) active structures have been demonstrated to provide the effective suppression of unwanted reflections as in subwavelength structure (SWS) or effective enhancement of selective signals as in SERS. While various nanopatterning techniques such as photolithography, electron-beam lithography, wafer level nanoimprinting lithography, and interference lithography can be employed to fabricate these nanostructures, roll-to-roll (R2R) nanoimprinting is gaining interests due to its low cost, continuous, and scalable process. R2R nanoimprinting requires a master to produce a stamp that can be wrapped around a quartz roller for repeated nanoimprinting process. Among many possibilities, two different types of mask can be employed to fabricate optically active nanostructures. One is self-assembled Au nanoparticles on Si substrate by depositing Au film with sputtering followed by annealing process. The other is monolayer silica particles dissolved in ethanol spread on the wafer by spin-coating method. The process is optimized by considering the density of Au and silica nano particles, depth and shape of the patterns. The depth of the pattern can be controlled with dry etch process using reactive ion etching (RIE) with the mixture of SF6 and CHF3. The resultant nanostructures are characterized for their reflectance using UV-Vis-NIR spectrophotometer (Agilent technology, Cary 5000) and for surface morphology using scanning electron microscope (SEM, JEOL JSM-7100F). Once optimized, these optically active nanostructures can be used to replicate with roll-to-roll process or soft lithography for various applications including displays, solar cells, and biosensors.

• Journal of Industrial Convergence
• /
• v.18 no.3
• /
• pp.27-34
• /
• 2020

For modern people living in the era of the 4th Industrial Revolution, appearance management and consumption behavior are very important factors not only in personal values but also in human relationships. It is used as an important means of competitiveness with skin beauty and fashion. It is used as an important means. Therefore, we compared and analyzed professionally from the aesthetic point of view about the makeup of the eyebrows, eyes, eye line, cheeks, lip make-up, and skin tone of Woohee, who appeared in the movie and Miss Korea in 1989. As a result of the study, other aspects were analyzed in the common denominator of a somewhat exaggerated makeup technique. Accordingly, through this study, it is possible to explore multiple angles for developing novel makeup patterns and items, and at the same time, it will help to establish a foundation for makeup beauty education. In addition, this study intends to contribute to the practical development with competitiveness by building a more aggressive marketing strategy in the makeup market.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.387-398
• /
• 2002

The impact response and damage of CLAS panel was investigated experimentally. The facesheet material used was RO4003 woven-glass hydrocarbon/ceramic and the core material was Nomex honeycomb with a cell size of 3.2mm and a density of 96 kg/㎥. The shield plane used was RO4003 and 2024-T3 aluminum. Static indentation and impact test was conducted to characterize the type and extent of the damage observed in two CLAS panels, and the performance of antenna used in a wireless LAN system. Correlation of peak contact force, residual indentation and the delamination area shows impact damage of the panel with an aluminum shield plane is larger than that of the panel with RO4003 shield plane, although the former is more penetration resistant. The damage was observed by naked eye, ultrasonic inspection and cross sectioning. The shape and size of delamination was estimated by ultrasonic inspection, and the area of delamination linearly increases as impact energy increases. The performance of impact damaged antenna was estimated by measuring return loss and radiation pattern. It was revealed that the performance of antenna was related to the impact damage and there was a threshold that the performance of antenna fell as impact energy level changed. The threshold was between the impact energies of 1.5J and 1.75J.

• Journal of Intelligence and Information Systems
• /
• v.9 no.1
• /
• pp.157-177
• /
• 2003

This paper presents a comprehensive and successful application of data mining methodologies to improve and predict wafer yield in a semiconductor wafer fabrication system. As the wafer fabrication process is getting more complex and the volume of technological data gathered continues to be vast, it is difficult to analyze the cause of yield deterioration effectively by means of statistical or heuristic approaches. To begin with this paper applies a clustering method to automatically identify AUF (Area Uniform Failure) phenomenon from data instead of naked eye that bad chips occurs in a specific area of wafer. Next, sequential pattern analysis and classification methods are applied to and out machines and parameters that are cause of low yield, respectively. Furthermore, radial bases function method is used to predict yield of wafers that are in process. Finally, this paper demonstrates an information system, Y2R-PLUS (Yield Rapid Ramp-up, Prediction, analysis & Up Support), that is developed in order to analyze and predict wafer yield in a korea semiconductor manufacturer.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.42-48
• /
• 2011

The present study makes three original contributions to nanoskinned Ti-6Al-4V materials. The nanoskins were fabricated on Ti-6Al-4V material using various surface treatments: deep rolling (DR), laser shot peening (LSP), and ultrasonic nanocrystal surface modification (UNSM). These surface treatments are newly developed techniques and are becoming more popular in industrial fields. A fatigue strength comparison at up to 106 cycles was conducted on these nanoskinned Ti-6Al-4V materials. Fatigue tests were carried out using MTS under axial loading tension-compression fatigue (R = -1, RT, 5 Hz, sinusoidal wave). The analysis of the crack initiation patterns in the nanoskinned Ti-6Al-4V materials found an interior originating crack pattern and surface originating crack type. Microscopic observation was mainly used to investigate the fatigue fractured sites. These surface modification techniques have been widely adopted, primarily because of the robust grade of their mechanical properties. These are mainly the result of the formation of a large-scale, deep, and useful compressive residual stress, the formation of nanocrystals by the severe plastic deformation (SPD) at the subsurface layer, and the increase in surface hardness.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1473-1477
• /
• 2007

Four-and-a-half LIM-only protein 3 (FHL3) is a member of the LIM protein superfamily and can participate in mediating protein-protein interaction by binding one another through their LIM domains. In this study, the 5'- and 3'- cDNA ends were characterized by RACE (Rapid Amplification of the cDNA Ends) methodology in combination with in silico cloning based on the partial cDNA sequence obtained. Bioinformatics analysis showed FHL3 protein contained four LIM domains and four LIM zinc-binding domains. In silico mapping assigned this gene to the gene cluster MTF1-INPP5B-SF3A3-FHL3-CGI-94 on pig chromosome 6 where several QTL affecting intramuscular fat and eye muscle area had previously been identified. Transcription of the FHL3 gene was detected in spleen, liver, kidney, small intestine, skeletal muscle, fat and stomach, with the greatest expression in skeletal muscle. The A/G polymorphism in exon II was significantly associated with birth weight, average daily gain before weaning, drip loss rate, water holding capacity and intramuscular fat in a Landrace-derived pig population. Together, the present study provided the useful information for further studies to determine the roles of FHL3 gene in the regulation of skeletal muscle cell growth and differentiation in pigs.

• Fisheries and Aquatic Sciences
• /
• v.19 no.4
• /
• pp.18.1-18.10
• /
• 2016

In this study, to clarify the function of $PoPLC-{\beta}1$, in response to stress challenge, we examined the $PoPLC-{\beta}1$ expression pattern in response to external stress (pathogen-associated molecular pathogen challenge and environmental challenge including temperature and salinity). $PoPLC-{\beta}1$ expression analysis of tissue from olive flounder showed that the messenger RNA (mRNA) was predominantly expressed in the brain, heart, eye, liver, spleen, and stomach. We also tested the mRNA expression of the $PoPLC-{\beta}1$ in the spleen and kidney of olive flounder by RT-PCR and real-time PCR following stimulation with lipopolysaccharide (LPS), concanavalin A (ConA), or polyinosinic:polycytidylic acid (PolyI:C) and compared with the inflammatory cytokines IL-1b and IL-6 in the stimulated flounder tissues. Each of the spleen and kidney and mRNA transcripts of $PoPLC-{\beta}1$ were increased 30- and 10-fold than normal tissue at 1-6 h post injection (HPI) with PolyI:C when the expression of $PoPLC-{\beta}1$ transcript was similar to LPS and ConA. We also tested the expression of $PoPLC-{\beta}1$ in response to temperature and salinity stress. The expression of $PoPLC-{\beta}1$ also was affected by temperature and salinity stress. Our results provide clear evidence that the olive flounder $PLC-{\beta}1$ signal pathways may play a critical role in immune function at the cellular level and in inflammation reactions. In addition, $PLC-{\beta}1$ appears to act as an oxidative-stress suppressor to prevent cell damage in fish.

• Korean Journal of Cognitive Science
• /
• v.14 no.4
• /
• pp.9-19
• /
• 2003

Bonneh, Cooperman and Sagi (2001) reported that when a global moving pattern was superimposed on high-contrast stationary stimuli, the latter disappeared and reappeared alternatively for periods of several seconds. They named this as motion-induced-blindness. In present research a rotating transparent cylinder composed of white dots was superimposed on a stationary green dots. When observers watched these stimuli wearing a red filter on his/her right eye, the stationary green dots disappeared or reappeared as did in Bonneh et al. The new MIB was observed only when the cylinder rotated and observers weared a red filter. As the luminance contrast of the green dots and that of white dots against the background reduced, and as the number of green dots and white dots decreased, the duration of MIB reduced. Also, the relative depth of the rotating cylinder and the stationary green dots affected the duration of MIB. These results imply that the new MIB is different from the MIB which was observed by Bonneh et al and that the new MIB cannot be explained by binocular rivalry. Further more, the results imply that the later stage of visual information processing is involved in the new MIB.