• Korean Journal of Food Science and Technology
• /
• v.23 no.6
• /
• pp.683-688
• /
• 1991

Wheat flour was extruded by a single-screw extruder, and used for the ethanol production of takju. The molecular structure and enzymic susceptability of extruded starch were compared to those of steam cooked one. The gel permeation chromatographic pattern of wheat flour extrudates was not significantly different from those of raw and steam cooked starches. However, the conversion rate of extruded starch into maltose by ${\alpha}-amylase$ hydrolysis was significantly faster than those of raw ad steamed starch. The molecular weight of starch estimated from GPC pattern and the intrinsic viscosity were remarkably reduced by extrusion cooking followed by the enzymic hydrolysis for 30 min, while steam cooking and enzymic hydrolysis for 30 min did not change them significantly. Extrusion-cooked flour produced alcohol 26% higher than that of steamed flour in the laboratory takju fermentation, and 10% more alcohol in the pilot plant scale takju production.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.5
• /
• pp.523-528
• /
• 1999

The influence of ginseng on the paste or gelatinization properties by amylograph and mixing properties by farinograph of wheat flour and on quality properties color cooking quality textural and sensory properties and reducing microbial population of LL(Long Life) noodles was studied. The contents of ginseng used were from 5% to 10% based on flour weight. The viscosity property of wheat flour with ginseng was increased the initial pasting temperature but the amylograph peak viscosity were decreased in vice versa. The farinograph absorption stability and breakdown were increased by ginseng. The whiteness of Ll nodles manufactured with ginseng was lower than that of control The shear extrusion force and hardness of LL noodles manufactured with ginseng were shown much higher value than those of control. At cooking quality examination of LL noodles manufactured with ginseng weight of cooked LL noodles was decreased but volum was appeared in ice versa,. Extraction amounts of LL noodles manufactured with ginseng during cooking were much smaller than those of control Total count of microorganism of Ll noodles manufactured with ginseng were decreased during storage at 3$0^{\circ}C$ Sensory properties of cooked LL noodles which was manufactured with ginseng showed quite acceptable. Based on the cooking and sensory evaluation test addition of 7.0% ginseng to wheat flour may be suitable for processing LL noodles.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.3
• /
• pp.252-257
• /
• 1999

In an attempt to evaluate the effects of calcium on paste or gelatinization properties by amylograph and mixing properties by farinograph of wheat flour and on viscosity property cooking quality textural and sensory properties of Ramyon were examined. The contents of calcium used were from 1.0% to 3.0% based on flour weight. The viscosity property of wheat flour with calcium was increased the initial past-ing temperature but the amylograph peak viscosity were decreased in vice versa. The farinograph absorp-tion stability and breakdown were increased by calcium. The shear extrusion force and hardness of Ram-yon manufactured with calcium were shown much higher value than those of control. At cooking quality examination of Ramyon manufactured with calcium weight of cooked Ramyon was increased by volume was decreased. Extraction amounts of Ramyon manufactured with calcium during cooking were much smaller than those of control. These changes will provided many advantages in the preparation of Ram-yon. The I2 reaction value of Ramyon manufactured with calcium and control were shown to almost same values. Sensory properties of cooked Ramyon which was manufactured with calcium showed quite acceptable. Based on the cooking and sensory evaluation test addition of 0.3% calcim to wheat flour may be suitable for processing Ramyon.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.758-765
• /
• 2005

Instant powders that only require mixing with water prior to consumption can be produced by extrusion for use in products such as instant beverages. Both extrusion processing conditions and particle size of powder are important to end-product characteristics. In this study, a twin-screw extruder was used under various processing conditions (feed moisture, barrel temperature, and screw speed) to produce extrudates from soft wheat flour, which were ground to powders with particle size ranges of less than 93, 93-145, and $145-249\;{\mu}m$. Effects of adding soy lecithin to wheat flour before extrusion were also investigated. Water absorption, solubility, suspension viscosity, and dispersibility of wheat powders were related to specific. mechanical energy measured during extrusion. Powder particle size was important to instant properties, especially ease of dispersal in water and stability to sedimentation. Addition of lecithin significantly improved dispersibility of powders.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.451-455
• /
• 1990

The extrusion characteristics of pork rind mixed with corn flour were investigated. The blends of pork rind to corn flour in the ratio of 1 : 2, 1 : 1, 2 : 1 and 3 : 1(w/w) were made and each blend was dried up to 5, 10 and 15% moisture content. The blends were extruded by single screw extruder. The extrusion characteristics of each extrudate were as follow. The highest value of expansion ration was attained by mixing pork rind and corn flour in the ratio of 1 : 1, containing 5% moisture content. As the rind content to the corn flour mixture was increased, the bulk density, water absorption index, breaking stregth and redness, of the extradate increased, but the lightness and yellowness decreased. It was concluded that a high quality snack food could by produced by extrusion-cooking the mixture of pork rind and corn flour.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.703-709
• /
• 1993

The changes in molecular size distribution of rice starch during extrusion cooking and simple heating of rice flour were compared and the effect of subsequent enzyme treatment on the molecular size was examined. A single-screw extruder was used with varing feed moisture contents ($17{\sim}29%$) and barrel temperatures ($100{\sim}150^{\circ}C$). An aluminium capsule immersed in oil bath ($100{\sim}200^{\circ}C$) was used for the simple heat treatment of rice flour. In case of extrusion cooking the mechanical energy input varied sharply at around 23% moisture content of the feed. At the feed moisture content of $17{\sim}23%$, a significant molecular size reduction of rice starch was observed by the gel permeation chromatography using Sephacryl S-1000 gel. The intact starch molecules of above $4{\times}10^{7}$ dalton were largely disintergrated by extrusion cooking of rice flour containing the moisture content less than 23%. It was mostly degraded further into the molecules having below $5{\times}10^{6}$ dalton by ${\alpha}-amylase$ treatment. But at the feed moisture content above 26% the starch did not show molecular size reduction either by extrusion cooking or by subsequent enzyme treatment. On the contrary little changes in molecular size of starch was occured by simple heating of rice flour containing the moisture less than 20%. but slight size reduction was observed at the moisture content above 23%, where the effect of ${\alpha}-amylase$ was also observed.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.4
• /
• pp.420-425
• /
• 1998

The effects of eggs on the quality properties, color measurment, cooking quality, textureal and sensory properties of Ramyon were esxamined. The contents of egg used were from 1% to 5% based on flour weight. The farinograph absorption decreased by egg but farinograph stability and breakdown were increased in vice versa. The yellowness of Ramyon prepared with eggs was higher than that of control. At cooking quality examination of Ramyon manufactred with eggs, weight of cooked Ramyon was increase but volume was appeared in vice versa. Extraction amounts of Ramyon manufactured with eggs during cooking were much smaller than those of control. The shear extrusion force and hardness of Ramyon manufactured with eggs were shown much higher value than those of control. The I2 reaction value of Ramyon manufactured with eggs and control were shown to almost same value,, from 2.13 to 2.20. Sensory properties of cooked Ramyon which was manufactured with eggs showed quite acceptable. Based on the cooking and sensory evaluation test, addition of 5% eggs to wheat flour may be suitable for processing Ramyon.

• Korean journal of food and cookery science
• /
• v.31 no.3
• /
• pp.248-254
• /
• 2015

We conducted this study to investigate the amount of RS and cooking characteristics of the commercial extrusion-cooked noodles. Ten kinds of noodles were selected and grouped according to the storage conditions; dry noodles (3), refrigerated noodles (2), freeze noodles (4), and dry noodle made from wheat flour as a control (not extrusion-cooked). The total starch of commercial noodles ranged from 62.50% to 84.13%, Refrigerated Naengmyeon and dry Dangmyun had high proportions of total starch (respectively 84.13% and 80.13%, respectively). The amounts of apparent amylose ranged from 25.01% to 42.93% and RS ranged from 0.61% to 5.99%. A high proportion of the total starch was rendered digestible by extrusion cooking, and a small amount of RS remained in the samples. Dry Dangmyun had the highest percentages of RS (5.99%), followed by refrigerated Naengmyeon C (2.41%) and dry Jjolmyeon (1.94%), and those of the other noodles were lower than that of the control (1.86%). Cooking properties and texture measurements were evaluated. Cooking loss and turbidity of cooking water were highest in dry Jjolmyeon and dry Naengmyeon. There was little cooking loss in dry Dangmyun and freeze rice noodles. In particular, dry Dangmyun and refrigerated Naengmyeon C containing high amounts of RS and amylose had relatively high measurements of hardness and tensile strength.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.780-787
• /
• 1989

The texturization properties of extrudate from isolated soybean protein and rice flour by extrusion cooking were investigated. The addition of up to 30% rice flur to isolated soy proetin could give more tenderness to the texturized extrudate. As the rice flour content increased, die temperature, nitrogen solubility index, and integrity index were decreased slightly with lower chewiness and gumminess. The water content of final extrudate was increased as the addition of rice flour increased, while density was maintained without variation, and rehydration ratio was decreased. The distribution of pressure profile during extrusion were in the range of $15-100kg/cm^3$. As the addition of rice flour increased, scanning electron micrographs demonstrated the gelatinized surface structure of rice starch and the increased air cell size of the testurized extrudate.

• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.171-175
• /
• 1987

An objective method for the evaluation of eating quality of cooked noodle was established by using a specially designed shear extrusion cell of Rheometer. From the force-distance curve, the maximum force, initial force, extrusion work, and the slope were determined. In a test with Korean dried noodles made from 17 types of Australian wheat flour, the maximum and initial forces and extrusion work could represent the firm-soft and chewy character, which govern mostly the preference of cooked noodle. On the other hand, the slope could distinguish the textural changes of cooked noodle during the storage after cooking. The parameters showed significant correlation with the protein content, water absorption, development time and extensibility of flour, but no correlation was obtained with the maximum viscosity of viscogram. For the estimation of textural preference, the correlation coefficient obtained from a multiple regression analysis using the maximum viscosity of viscogram and the maximum force of shear extrusion test as the two independent variables was not significantly higher than the coefficient obtained from a simple regression with the maximum force only.