• Journal of the Korean Chemical Society
• /
• v.56 no.3
• /
• pp.357-362
• /
• 2012

5-Nonylsalicylaldoxime and salicylaldehyde are two derivatives of phenolic compounds which are very applicable materials in industries. Formerly the formylation of phenolic derivatives were carried out by Rimer-Tiemann method. In this work both of these two materials were synthesized by magnesium meditated formylation technique and their structural characterizations were compared by instrumental analysis technique. In order to achieve a selectively orthoformylated product, the hydroxyl group of nonylphenol (or phenol) was first modified by magnesium methoxide. The nonylphenol magnesium salt was then formylated by paraformaldehyde. The oximation reaction was finally applied to the prepared nonylsalicylaldehyde magnesium salt by liquid extracting via water and acid washing and other extractions. The solvent was finally removed by evaporation under reduced pressure. Some instrumental analysis such as $^1H$-NMR, GC/MS and FT-IR spectra were taken on the product in order to interpret the reaction characterization quantitatively and qualitatively. The formaldehyde and oxime functional groups of two compounds were investigated through $^1H$-NMR and FT-IR spectra and were compared. The yield of methoxilation was very good and the yields of formylation and oximation reactions were about 90%and 85% respectively. The orthoselectivity of formylation reaction were evaluated by comparing of the relevant spectra. The GC/MS spectra also confirmed the obtained results.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2320-2324
• /
• 2012

A novel approach for metabolite extraction and fingerprinting was introduced based upon the nano-baskets and emulsion liquid membrane-nuclear magnetic resonance (ELM-NMR) technique. The objective of this method is optimizing the fingerprints, minimizing the metabolic variation from analysis, increasing the likelihood differences, and obtaining the maximum extraction yield. Low molecular weight metabolites in rat serum were recovered by ELMs using 12 nano-baskets of calixarene, as both emulsifier and carrier. The yields of ELMs were optimized by the method of one-at-a-time. According to NMR data, the maximum metabolic variation was achieved using scaffold 4 (4 wt %), n-decane membrane, stirring rate of 300 rpm, treat and phase ratios of 0.3 and 0.8, respectively. The results revealed that some calixarenes tend to extract non-specific macromolecules; and repeatability of fingerprints for 7-mediated ELM was maximum and for 3-mediated ELM was minimum. The yield of extractions was obtained to be higher for n-decane and lower for carbon tetrachloride. Among different membranes, the fingerprints by chlorinated liquid membranes were more repeatable than using toluene or n-decane.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2687-2690
• /
• 2009

Due to the importance of isoflavone content in soybean extracts, the microwave-assisted process (MAP) was compared to the conventional extraction methods. For comparison of the three methods, all extraction parameters (solvent, sample to solvent ratio, temperature, etc.) were kept the same; the microwave extractor was operated at 187.5 W with an emission frequency of 2450 MHz under atmospheric pressure conditions and the extractions were carried out at 75 ${^{\circ}C}$ for 3 min while the conventional reflux was at 75 ${^{\circ}C}$ for 3 h. Total yield and crude isoflavone content were determined by ultraviolet spectrophotometric and compared with the three methods. Results indicated that the MAP was comparable to the conventional method in its capability to extract target compounds without causing any degradation; in addition it dramatically reduced the extraction time from 3 h to a few minutes, suggesting that it can be an alternative technique to the time-consuming conventional reflux method.

• Journal of the Korean Chemical Society
• /
• v.39 no.4
• /
• pp.266-274
• /
• 1995

The extractions of aqueous Eu3+ and Tb3+ ions into ethylacetate or dichloromethane were conducted by using 12-crown-4, 15-crown-5 and 18-crown-6 ethers as ligand. Benzoate ion was selected as counter anion for the complexes formed between the lanthanide ions and crown ethers. Fluorescence spectra of the lanthanide ions induced by the energy transfer from benzoate anion to the cations were also measured. The quantitative analysis of the lanthanide ions extracted into organic phase were made on the basis of the results of fluorescence. The measured extractivity is interpreted in terms of the ion-dipole interaction.

• 한국HCI학회:학술대회논문집
• /
• 2008.02c
• /
• pp.224-224
• /
• 2008

Recent advances in model acquisition, computer-aided design, and simulation technologies have resulted in massive databases of complex geometric data occupying multiple gigabytes and even terabytes. In various graphics/geometric applications, the major performance bottleneck is typically in accessing these massive geometric data due to the high complexity of such massive geometric data sets. However, there has been a consistent lower growth rate of data access speed compared to that of computational processing speed. Moreover, recent multi-core architectures aggravate this phenomenon. Therefore, it is expected that the current architecture improvement does not offer the solution to the problem of dealing with ever growing massive geometric data, especially in the case of using commodity hardware. In this tutorial, I will focus on two orthogonal approaches--multi-resolution and cache-coherent layout techniques--to design scalable graphics/geometric algorithms. First, I will discuss multi-resolution techniques that reduce the amount of data necessary for performing geometric methods within an error bound. Second, I will explain cache-coherent layouts that improve the cache utilization of runtime geometric applications. I have applied these two techniques into rendering, collision detection, and iso-surface extractions and, thereby, have been able to achieve significant performance improvement. I will show live demonstrations of view-dependent rendering and collision detection between massive models consisting of tens of millions of triangles on a laptop during the talk.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.635-642
• /
• 2014

The space charge behaviors of oil-paper insulation affect the stability and security of oil-filled converter transformers of traditional and new energies. This paper presents the results of the electrical aging of oil-impregnated paper under AC-DC combined voltages by the pulsed electro-acoustic technique. Data mining and feature extractions were performed on the influence of electrical aging on charge dynamics based on the experiment results in the first stage. Characteristic parameters such as total charge injection and apparent charge mobility were calculated. The influences of electrical aging on the trap energy distribution of an oil-paper insulation system were analyzed and discussed. Longer electrical aging time would increase the depth and energy density of charge trap, which decelerates the apparent charge mobility and increases the probability of hot electron formation. This mechanism would accelerate damage to the cellulose and the formation of discharge channels, enhance the acceleration of the electric field distortion, and shorten insulation lifetime under AC-DC combined voltages.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1018-1025
• /
• 2011

The improved properties of corrosion for 90Cu10NiFe alloy in natural seawater were explained by sodium diethyl dithio carbamate(NaDDC), namely organic compound, which is reagent for heavy metal extractions of waste water. The efficiency of NaDDC as corrosion inhibitor for 90Cu10NiFe alloy has been investigated in seawater after immersion in various concentrations of NaDDC solutions for 12~36hrs at pH 8.2 by weight loss test and electrochemical techniques including potentiodynamic polarization and SEM-EDS measurements. The results showed that the corrosion resistance of 90Cu10NiFe alloy improves with the increasing concentration of NaDDC but it did not improves with increasing time any more, so the highest inhibition efficiency was 93% at 100mg/L, 36hrs. The results obtained from weight losses and corrosion rates in polarization curve measurements were in good agreement. Therefore, it showed that NaDDC is a good inhibitor for copper corrosion of 90Cu10NiFe alloy.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.323-327
• /
• 2000

Microwave-assisted process (2,450MHz), which is known as a more environmental-friendly process with economic advantages than the current extraction methods, was investigated to pre-establish the extraction conditions for soluble ginseng components used for the processing of ginseng products. The extractions of soluble ginseng components showed optimum conditions, such as 60 mesh in particle size, 1 : 10 (g/mL) in the sample to solvent ratio, and less than 100 watts in energy efficiency. Under these conditions using along with 60% ethanol for 5 min, the overall yield of ginseng extracts was about 83%. Most soluble components including saponins were extracted by repeating five times of microwave-assisted extraction.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.4
• /
• pp.788-795
• /
• 2017

This research has attempted to investigate the volatile flavor compounds of onion products through acetic fermentation, and to create a natural beverage with beneficial biological properties which can also fulfill customer quality standards. Onion products (OAF (M): Onion extracts at five days of acetic fermentation, OAF (F): Onion extracts at ten days of acetic fermentation) were produced by acetic fermentation. Volatile flavor compounds from onion extracts, OAF (M) and OAF (F) were used by Mixxor liquid extractions and analyzed by GC/MSD. Compounds of 49, 75 and 69 were identified in onion extracts, OAF(M) and OAF(F) respectively. Among the major volatile flavor compounds classes, sulfur containing compounds (36.7%), acids (31.2%) and aldehydes (13.5%) in onion extracts were changed into acids (69.6%) and alcohols (24.6%) in OAF (M) and acids (80.6%) and alcohols (15.5%) in OAF (F). During acetic fermentation acetic acid, 1,3-butanediol (odorless) and 2,3-butanediol (onion flavor) increased remarkably, sulfur-containing compound such as 2,5-dimethylthiophene having anti-oxidant activities was detected by fermentation.

• Preventive Nutrition and Food Science
• /
• v.2 no.3
• /
• pp.202-206
• /
• 1997

To develop mil fat fractions with desirable physico-chemical properties, anhydrous milk fat (AMF) was fractionated by one- and two-stage extractions using supercritical $CO_2$(SC-$CO_2$). Tow-stage extraction of AMF was performed by first producing tow fractions, an extract and a residue at 4$0^{\circ}C$/241bar, which were subsequently used as the feed for an extraction at 6$0^{\circ}C$/241bar and 4$0^{\circ}C$/345bar, and separated into five and four fractions, respectively, based one extraction time. These fractions were quantified and analyzed for fatty acids and physico-chemical properties. SHort-chain (C4~C8) fatty acids in extract fractions from an extract were 200~150% compared with those of the original AF. Long-chain (C14~C18) fatty acids in extract fractions from a residue were 118~141%. The ratio of unsaturated fatty acids in the residue fraction was 131%. Melting point ranged from 22 to 43$^{\circ}C$, iodine value 21.8 to 36.9, and saponification value 255 to 221 in the extract and residue fractions. SC-$CO_2$ fractionation of AMF by two-stage extraction offers the possibility of developing ractions with discrete fatty acid compositions and physico-chemical properties such as melting point, iodine value and saponification value.