• 산업식품공학
• /
• 제13권1호
• /
• pp.32-37
• /
• 2009

Central composite design was applied for the ultrasound-assisted extraction from peel and seed of Campbell Early grapes and the extraction processes were optimized for the antiradical activities of the extracts by using response surface methodology. Optimal conditions were 53.45% of ethanol concentration, 45.99${^{\circ}C}$ of extraction temperature and 23.93 min of extraction time for the maximum antiradical activity of grape peel extract (54.98%) and 53.14% of ethanol 56.03${^{\circ}C}$ of temperature and 29.03 min of time for maximum antiradical activity of grape seed extract (90.60%).

• Journal of Microbiology and Biotechnology
• /
• 제17권11호
• /
• pp.1880-1884
• /
• 2007

This study was conducted to find the optimum extraction condition of Gold-Thread for antibacterial activity against Streptococcus mutans using The evolutionary operation-factorial design technique. Higher antibacterial activity was achieved in a higher extraction temperature ($R^2=-0.79$) and in a longer extraction time ($R^2=-0.71$). Antibacterial activity was not affected by differentiation of the ethanol concentration in the extraction solvent ($R^2=-0.12$). The maximum antibacterial activity of clove against S. mutans determined by the EVOP-factorial technique was obtained at $80^{\circ}C$ extraction temperature, 26 h extraction time, and 50% ethanol concentration. The population of S. mutans decreased from 6.110 logCFU/ml in the initial set to 4.125 logCFU/ml in the third set.

• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.315-319
• /
• 2016

아마란스 종실 생산의 부산물인 아마란스 잎으로부터 폴리페놀 추출 증대를 위해 열수추출의 주요 공정조건인 추출시간, 추출온도와 에탄올 농도 중심합성법을 이용해 최적화하였다. 폴리페놀의 추출은 추출온도와 시간이 증가함에 따라 증가하였으며 추출에 에탄올 농도와 추출시간이 유의한 효과를 보였다(p<0.05). 열수추출의 에탄올 농도는 61.6 (v/v%)에서 최대 폴리페놀 추출성능을 보이며 농도 증가에 따라 감소하는 경향을 보였다. 중심합성법에 의해 제시 된 2차 회귀방정식의 예측값과 실험값을 비교했을 때 매우 높은 합치도($R^2=0.9566$)를 보였으며 추출온도 $90.1^{\circ}C$, 추출시간 50 min과 에탄올 61.6 (v/v%) 공정조건에서 최대 농도인 12.6 mg GAE/g DM 폴리페놀을 얻을 수 있었다.

• 상하수도학회지
• /
• 제18권5호
• /
• pp.638-648
• /
• 2004

In many drinking water treatment plants, chlorination process is one of the main techniques used for the disinfection of water. This disinfecting treatment leads to the formation of haloacetic acid (HAAs). In this study, headspace solid-phase microextraction (HS-SPME) was studied as a possible alternative to liquid-liquid extraction for the analysis of HAAs in drinking water. The method involves direct derivatization of the acids to their methyl esters without methyl tert-butyl ether (MTBE) extraction, followed by HS-SPME with a $2cm-50/30{\mu}m$ divinylbenzene/carboxen/polydimethylsiloxane fiber. The effects of experimental parameters such as selection of SPME fiber, the volume of sulphuric acid and methanol, derivatization temperature and time, the addition of salts, extraction temperature and time, and desorption time on the analysis were investigated. Analytical parameters such as linearity, repeatability and limit of detection were also evaluated. The $2cm-50/30{\mu}m$-divinylbenzene/carboxen/polydimethylsiloxane fiber, sulphuric acid of 1ml, methanol of 3ml, derivatization temperature of $50^{\circ}C$ derivatization time of 2hrs, sodium chloride salt of 10g, extraction time of 30 minutes, extraction temperature of $20^{\circ}C$ and desorption time of 1 minute at $260^{\circ}C$ were selected as the optimal experimental conditions for the analysis of HAAs. The linearities ($r^2$), relative standard deviations (%RSD) and limits of detection (LOD) for HAAs were 0.9978~0.9991, 1.1~9.8% and $0.05{\sim}0.2{\mu}g/l$, respectively.

• 한국식품영양학회지
• /
• 제30권2호
• /
• pp.319-325
• /
• 2017

본 연구에서는 상업적으로 가장 많이 쓰는 커피 추출기인 2단계 퍼콜레이터를 사용하여 인스턴트커피를 제조하기 위한 커피추출조건을 최적화하였다. 반응표면분석을 위한 수학적 모델식을 구하기 위해 중심합성계획법이 사용되었고, 구해진 모델식에서는 커피추출액의 추출 수율과 추출액의 전반적인 기호도가 3가지 요인(추출기의 급수온도, 추출배수, 추출시간)의 2차식으로 표현되었다. 반응표면분석의 결과를 바탕으로 40% 이상의 수율을 보이는 범위에서, 추출수율과 전반적인 기호도를 최대로 하는 최적 커피 추출 조건은 급수온도 $163^{\circ}C$, 추출배수 4.3 및 추출시간 27분이었다. 이 결과는 산업에서 경쟁력 있는 인스턴트 커피 제조를 위한 커피 추출 조건에 대한 기초 자료를 제공한다.

• 생명과학회지
• /
• 제24권4호
• /
• pp.419-427
• /
• 2014

인진쑥(Artemisia capillaris Thunbl)의 항산화적 특성을 조사하기 위하여 반응표면분석법에 의하여 열수추출특성을 모니터링하여 최적 추출조건을 설정하였다. 총 페놀성화합물 함량에 대한 최적조건은 $94.50^{\circ}C$, 2.06 hr 및 시료에 대한 용매비 25.03 ml/g, 전자공여능에 대한 최적조건은 $91.82^{\circ}C$, 2.90 hr 및 20.88 ml/g으로 나타났고, 아질산염 소거능(pH 1.2)에 대한 최적조건은 $97.36^{\circ}C$, 2.75 hr 및 15.19 ml/g등으로 각각 나타났다. 각 변수에 대한 회귀식을 도출하여 인진쑥의 총 페놀성화합물 함량, 전자공여능 및 아질산염 소거능(pH 1.2)에 대한 최적 추출조건을 superimposing 한 결과, 추출온도 $90{\sim}95^{\circ}C$, 추출시간 2.5~3.5 hr 및 시료에 대한 용매비 17~24 ml/g의 범위로 각각 예측되었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권4호
• /
• pp.1-7
• /
• 2013

Subcritical water which acts as organic solvent with increasing temperature and pressure because dielectric constant and viscosity decrease can be used to remediate PAHs-contaminated soil. Factors influencing on extraction were studied with varying the water temperature $200{\sim}275^{\circ}C$, extraction time 0~90 min, flow rate 10~100 mL/min and pressure 3.9~10MPa. 300 g of soil sample which was contaminated with PAHs(naphthalene, phenanthrene, fluoranthene and pyrene; 423, 420, 539 and 428 mg/kg of initial concentration) was packed into the cell and placed to reactor and then the subcritical water was pumped through the cell for PAHs extraction. Naphthalene was removed almost 100% at relatively low temperature ($200^{\circ}C$). The removal rate of phenanthrene, fluoranthene, and pyrene increased by 8, 26, and 23% when the temperature increased from 200 to $275^{\circ}C$; and it was gradually increased as extraction time increased from 0 to 90 min. Decreasing removal rate when water flow rate increased from 10 to 30 mL/min, but there was no significant change after 30 mL/min. This is supposed due to channeling phenomenon. The pressure was not an effective factor for extraction of PAHs in this study. Based on the results, the importance of effective factor was in following sequence: temperature >> time > flow rate.

• 한국응용과학기술학회지
• /
• 제38권6호
• /
• pp.1699-1708
• /
• 2021

고품질의 아가콩 음료개발을 위해 반응표면분석법에 의한 추출조건을 최적화 하였다. 아가콩의 최적 볶음조건은 250 ℃, 30분으로 설정하였다. 추출시간, 추출온도에 따른 아가콩의 품질지표인 pH, 색도 및 이소플라본 함량은 1% 이내에서의 유의적인 영향을 미치는 것으로 나타났다. 추출온도와 추출시간이 길어질수록 이소플라본 함량은 높은 것으로 나타났다. 반응표면분석의 이소플라본 추출 공정 최적화 결과 추출온도는 99.5 ℃, 추출시간은 1.7 h으로 나타났으며, 이 조건에서 이소플라본의 최적 수율은 10.63 ㎍/mL로 예측되었다.

• 생약학회지
• /
• 제38권1호
• /
• pp.56-61
• /
• 2007

This study was carried out to investigate the optimum conditions for extraction of acidic polysaccharides from red ginseng marc produced by manufacturing alcoholic extract from red ginseng. Method of carbazole-sulfuric acid was applied to determine the amount of acidic polysaccharides in red ginseng marc. The amounts of acidic polysaccharides in water extract of red ginseng marc were increased with increasing extraction temperature. The contents of acidic polysaccharides were not significantly different despite of the extraction time increasing from 6 hours to 48 hours. The contents of starch in water-extract of red ginseng marc were increased with increasing extraction temperature. The starch amounts in water extract of red ginseng marc extracted for 48 hours were increased. The yields of polysaccharide precipitated from water-extract of red ginseng marc were increased with increasing extraction temperature. The hydration rate of acidic polysaccharides and starch from water-extract of red ginseng marc were decreased with increasing extraction temperature. The contents of starch were not significantly different despite of the extraction time increasing from 6 hours to 48 hours at $8^{\circ}C$. However, the rehydration rate of acidic polysaccharide for 48 hours were decreased at $8^{\circ}C$. The rehydration rate of acidic polysaccharide and starch extracted from 6 hours to 24 hours at $25^{\circ}C$ were not significantly different, but those extracted for 48 hours were increased. From the above results, we suggest that by altering the extraction conditions in red ginseng marc it is possible to develop optimum conditions for extraction that modulate the proportions of acidic polysaccharide and starch.

• Integrative Medicine Research
• /
• 제6권4호
• /
• pp.388-394
• /
• 2017

Background: The present study optimized ultrasound-assisted extraction conditions to maximize extraction yields of glycyrrhizic acid from licorice. Methods: The optimal extraction temperature ($X_1$), extraction time ($X_2$), and methanol concentration ($X_3$) were identified using response surface methodology (RSM). A central composite design (CCD) was used for experimental design and analysis of the results to obtain the optimal processing parameters. Results: Statistical analyses revealed that three variables and the quadratic of $X_1$, $X_2$, and $X_3$ had significant effects on the yields and were followed by significant interaction effects between the variables of $X_2$ and $X_3$ (p<0.01). A 3D response surface plot and contour plots derived from the mathematical models were applied to determine the optimal conditions. The optimum ultrasound-assisted extraction conditions were as follows: extraction temperature, $69^{\circ}C$; extraction time, 34?min; and methanol concentration, 57%. Under these conditions, the experimental yield of glycyrrhizic acid was 3.414%, which agreed closely with the predicted value (3.406%). Conclusion: The experimental values agreed with those predicted by RSM models, thus indicating the suitability of the model employed and the success of RSM in optimizing the extraction conditions.