• 대한화학회지
• /
• 제13권3호
• /
• pp.199-204
• /
• 1969

4f 및 5f 系列 元素의 溶媒抽出에 있어서 分配速度를 測定해 본 結果 4f 系列의 前半部와 後半部 間에 明白한 差異를 볼 수 있었다. 三價의 Am 및 Cm은 4f 系列의 前半部와 類似함을 알았다. 또한 分配率과 抽出溫度와의 關係를 檢討해 본 結果 抽出系에 따라 獨特한 增加 또는 減少傾向이 나타났으며 또한 Chelate 抽出系에 있어서는 原子番號 存在性이 있음을 알았다

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권3호
• /
• pp.217-225
• /
• 2001

Any fracture passing through the socket of a teeth is compounded intraorally, even if the fracture is not displaced and the tooth is firm in its socket. Before the advent of antibiotic therapy the danger of infection in a compounded fracture posed severe problems in treatment. Infection is reduced by antibiotic therapy but prolonged use of antibiotics is not justified in an attempt to save a tooth which might eventually be sacrificed. There is still controversy in the management of third molar in mandibualr angle fracture, particulary in regard to their retention or removal at the time of fracture treatment. So we surveyed the 159 patients who were treated with open reduction of mandibular angle fracture containing third molar in fracture line, and compared with the postoperative infection rate depending on time intervals between injury and operation, eruption state of third molar, non-extraction or extraction of third molar related to eruption state, non-extraction or extraction of third molar related to condiition of third molar and its surrounding periodontium and were to propose treatment guidline of third molar in mandibular angle fracture The results obtained were as follows : 1. There were no statistical significance between the time from injury to operation and postoperative infection. 2. There were no statistical significance between eruption state of third molar and postoperative infection. 3. In case of retention of the third molar, there were no statistical significance between eruption state of third molar and postoperative infection, but in case of extraction, postoperative infection was high rate in complete impacted cases. 4. There were no statistical significance between non-extraction or extraction of third molar and postoperative infection depending on condition of third molar. There are no difference in infection rate statistically according to the time from injury to operation, eruption state and condition of third molar, but retention of third molar revealed lowered infection rate in completely impacted cases. By terms of the manegement of third molar, we should extract or preserve third molar in the line of the mandibular angle fracture according to possibility of infection.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.366-368
• /
• 2007

In this paper, the Time-varying Failure Rate (TFR) of power distribution system equipment is extracted from the recorded failure data of Korea Electric Power Corporation (KEPCO). For TFR extraction, it is used that the fault data accumulated by KEPCO during 10 years. The TFR is approximated to bathtub curve using the exponential (random failure) and Weibull (aging failure) distribution function. In addition, Kaplan-Meier estimation is applied to TFR extraction because of incomplete failure data of KEPCO. Finally, Probability plot and regression analysis is applied. It is presented that the extracted TFR is more effective and useful than Mean Failure Rate (MFR) through the comparison between TFR and MFR.

• 한국전자파학회논문지
• /
• 제30권5호
• /
• pp.380-388
• /
• 2019

제트 엔진 변조(jet engine modulation: JEM) 신호는 제트 엔진 고유의 정보를 제공하기 때문에 표적 인식 분야에서 널리 이용된다. JEM 신호의 고유 정보인 날개 수를 얻기 위해서는 날개의 회전 속도, spool rate를 추출하는 것이 중요하다. 하지만 약한 JEM 신호에서는 회전 속도를 추출하는데 어려움을 겪는다. 이에 본 논문에서는 약한 JEM 신호에서 spool rate를 추출하는 알고리즘을 제안한다. 우선 JEM 신호에서 spool rate를 추출하기 위해서 JEM 신호 성분의 강약을 구분하는 기준을 정하여 신호를 구분한다. 그 중 약한 신호를 high-pass filtering 기반의 전처리 과정을 거쳐 spool rate 추출에 용의하도록 신호를 변형해준다. Spool rate를 추출할 수 있는 신호를 얻고 난 후, peak detection 과정을 통하여 spool peak를 찾고, spool period/rate를 추출한다. 기존의 CEMD(Complex Empirical Mode Decomposition), WD(Wavelet Decomposition)와 같은 방법보다 간단하기 때문에, 추출을 정확하게 할 뿐만 아니라 시간을 매우 절약할 수 있음을 입증하였다.

• 한국자기학회지
• /
• 제22권5호
• /
• pp.178-182
• /
• 2012

영구자석과 반도체 홀센서가 구비된 집게형 맥진기로 얻은 맥진파형에 고속 푸리에변환(FFT)을 적용하여 생체신호인 호흡수를 추출하였다. 추출된 호흡수는 맥진파형의 형태가 항상 변화하는 요인에 의존하는 심장의 운동에 대한 오차까지 고려하였다. 인위적인 호흡수 템포 15, 20, 30, 40, 50에 각각 측정한 맥진파형의 FFT 스펙트럼에서 피크값과 일치하는 주파수 0.125 Hz, 0.16 Hz, 0.25 Hz, 0.33 Hz, 0.41 Hz와 일치하였다. 100 s, 200 s, 300 s 동안 얻은 맥진파형 데이터에서 호흡성분 추출 알고리즘을 적용한 결과, 시간이 긴 300 s에서 FFT 스펙트럼 피크가 가장 크게 뾰쪽해지는 결과를 얻었다. 집게형 맥진기가 인체의 물리적인 영향을 주는 호흡수를 추출해 내는데 유용한 기기임을 확인하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권6호
• /
• pp.48-56
• /
• 2017

Although various methods have been investigated for treatment of crude oil contaminated soil, more researches are still required to preserve soil environment. This study investigated the potential utility of subcritical water in remediation of crude oil contaminated soil under various experimental conditions including temperature ($150-300^{\circ}C$), flow rate (1.0-2.0 mL/min) and extraction time (60-120 min). The removal rate of crude oil gradually increased with increasing temperature and time. After treatment at $200^{\circ}C$ and $300^{\circ}C$ for 60 min, the remaining concentration of crude oil met the Kuwait standard clean-up level (10,000 mg/kg) and the Korean standard level (2,000 mg/kg), respectively. The removal efficiency of crude oil increased from 77.8% to 88.4% with increasing extraction time from 60 to 120 min at $250^{\circ}C$. A decreasing rate of oil removal was observed as flow rate increased, possibly due to channeling flow occurred within the soil body at higher flow rate condition. Overall, the results revealed that subcritical water extraction process could be feasible for remediation of crude oil contaminated soil, and the relative effect of parameters on the oil removal was in the order of temperature > time > flow rate.

• Preventive Nutrition and Food Science
• /
• 제1권2호
• /
• pp.179-185
• /
• 1996

Extraction yields of thiosulfinates from garlic were studied by using gas-in-liquis-dispersion(GLD) system to maxmize the thiosulfinate extraction. Extracted thiosulfinates were spectrophotometically quantified using synthesized dially1 thiosulfinate. The conditions for maximum extraction were optimized by response surface methodology. The volatile components extracted by various methods, such as hexane extraction, simultaneous steam distillation and GLD system, were compared by using gas chromatography. The results indicated that the thiosulfinate yield was increased by incresaing temperature and nitrogen gas flow rate, while the effects of bubble sizes on thiosulfinate extraction were not significant at the ranges tested. Application of GLD system resulted in extraction of more volatile components than other extraction methods, Therfore, it was suggested that GLD system was one of the efficient extraction methods among the ever introduced ones, for thiosulfinate extraciton.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.325-327
• /
• 2004

ECG limb lead II signal widely used to diagnosis heart diseases and it is essential to detect ECG events (onsets, offsets and peaks of the QRS complex P wave and T wave) and extract them from ECG signal for heart diseases diagnoses. However, it is very difficult to develop standardized feature extraction formulas since ECG signals are varying on patients and disease types. In this paper, simple feature extraction method from normal and abnormal types of ECG signals is proposed. As a signal features, heart rate, PR interval, QRS interval, QT interval, interval between S wave and baseline, and T wave types are extracted. To show the validity of proposed method, Right Bundle Branch Block (RBBB), Left Bundle Branch Block (LBBB), Sinus Bradycardia, and Sinus Tachycardia data from MIT-BIH arrhythmia database are used for feature extraction and the extraction results showed higher extraction capability compare to conventional formula based extraction method.

• 한국항해항만학회지
• /
• 제28권8호
• /
• pp.727-733
• /
• 2004

자동차 번호판 인식 시스템에서 가장 중요한 요소가 자동차 이미지 영역에서 번호판 영역을 정확히 검출해 내는 것이다. 자동차 이미지에서 번호판 영역을 추출하기 위한 방법으로 색상과 밝기 정보와 자동차 번호판의 가로 세로 비율 등 번호판을 인식할 수 있는 정보를 혼용한 ACL 알고리즘을 제안한다. ACL 알고리즘을 사용함으로써 기존의 색상 정보나 명암 정보만을 이용할 경우 자동차 번호판 영역 추출이 잘되지 않는 문제를 해소시켜 준다. 본 논문에서 제안하는 ACL 알고리즘은 자동차 이미지에서 번호판 영역을 추출할 경우 색상 정보와 명암정보, 기타 자동차 번호판을 판단할 수 있는 정보를 모두 이용한다. ACL 알고리즘을 이용하여 번호판 추출 실험을 한 결과 97%의 추출률을 보였다. ACL 알고리즘을 이용하여 추출된 번호판을 이용하여 문자 영역, 문자 인식을 한 결과 92%의 결과를 보였다.

• 태양에너지
• /
• 제18권3호
• /
• pp.71-80
• /
• 1998

In thermal energy storage system, energy collected from many types of heat source is stored in a storage tank and then supply to load for demand. Lately, practical use of thermal energy storage system and attention to essential use of energy have been increased. From this point of view, especially, a study about the energy extraction process from a storage tank is necessary. So in this study, useful rate of hot water and hot water extraction efficiency was analysed respect to dynamic and geometric parameters dominating the hot water extraction process.