• YAKHAK HOEJI
• /
• v.5 no.1
• /
• pp.66-67
• /
• 1960

The apparatus devised by the author (fig. 1B) was found a simple and effective one for extracting Genistin from Soy Bean.

• Plant Resources
• /
• v.6 no.3
• /
• pp.221-226
• /
• 2003

To improve industrial scale extraction method for extraction of icariin from Epimedium koreanum Nakai, the yields under different extracting conditions such as solvent, temperature, duration and solvent to plant material weight ratio were compared. Regarding extracting solution, highest extracts and icariin yield could be achieved when 10% EtOH was used. In case of plant material to extracting solvent ratio, no significant differences could be observed from 1/10 to 1/50, indicating 1/10 was the most efficient. Extracting temperature significantly affected extracts and icariin yields in that 9$0^{\circ}C$ increased the collected extracts and icariin contents up to 29.6% and 0.76%, respectively, compared to 27.2%, 0.33% at 7$0^{\circ}C$. The yield of extracts was less dependent upon extracting temperature compared to icariin yield. Regarding extraction time, 4 hr and 6 hr resulted in high extracts and icariin yield, respectively. We found extracting Epimedium koreanum Nakai in 10 times volume of 10% EtOH for 4 and 6 hr at 9$0^{\circ}C$ seem to be relatively efficient methods for extracts and icariin, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.4
• /
• pp.226-231
• /
• 2005

To investigate the physical properties of sea tangle (Laminaria japonica) alginates, extracted by the Mexican process, the effects of extracting time and drying methods on intrinsic viscosities, MWs and DPs of alginates were examined. The MWs of alginates before and after dialysis decreased with increase of extracting time. The MW s before dialysis were lower than those after dialysis. The ash contents before dialysis decreased with increase of extracting time. After dialysis the ash contents of the alginates showed 10.4-10.9% of those, which were little affected by extracting time. In the ash composition after dialysis, the sodium content was 4.4 g/100 g, $90\%$ of total ash content. The ash contents, the intrinsic viscosities, the average molecular weight and the DPs of the alginates dried by AD before dialysis were higher than those by VF. The ash and uronic acid contents of alginates after dialysis showed $10.6-10.9\%\;and\l88.1-88.9\%$, respectively. But the intrinsic viscosities, the MWs and DPs of the alginates after dialysis gradually decreased by following dry methods. The decreased order was ADAD, ADVF, VFAD, VFVF. The coefficient of determination between MWs and DPs in the alginates having more than 300 kDa was 0.999.

• Journal of Information Processing Systems
• /
• v.15 no.4
• /
• pp.931-956
• /
• 2019

Documents contain information that can be used for various applications, such as question answering (QA) system, information retrieval (IR) system, and recommendation system. To use the information, it is necessary to develop a method of extracting such information from the documents written in a form of natural language. There are several kinds of the information (e.g., temporal information, spatial information, semantic role information), where different kinds of information will be extracted with different methods. In this paper, the existing studies about the methods of extracting the temporal information are reported and several related issues are discussed. The issues are about the task boundary of the temporal information extraction, the history of the annotation languages and shared tasks, the research issues, the applications using the temporal information, and evaluation metrics. Although the history of the tasks of temporal information extraction is not long, there have been many studies that tried various methods. This paper gives which approach is known to be the better way of extracting a particular part of the temporal information, and also provides a future research direction.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.2
• /
• pp.135-144
• /
• 1999

The purposes of this study were to survey types of pretreatment methods adopted by industrial hygiene laboratories in Korea for extracting heavy metals in welding fume samples and to compare performances of two pretreatment methods, the acid extraction and the microwave digestion, in extracting heavy metals contained in the real workplace samples from various welding jobs including arc, argon, and carbon dioxide. A total of 25 analytical chemists in the industrial hygiene laboratories participating the quality control program directed by the Korea Industrial Safety Corporation were interviewed by telephone. For the purpose of comparing performance of extracting heavy metals from real workplace samples, a total of 53 welders from 21 workplaces located in Anyang, Uiwang, and Kunpo areas were sampled from the period of March 22, 1999 to April 20, 1999. It was found that the most frequently adopted method for samples from the quality control program was the acid extraction method(40%) followed by the NIOSH 7300 method(36%). The NIOSH method, however, was the dominant method(36%) for samples from workplace followed by the acid extraction method(28%). In this study, two extraction methods, the acid extraction and the microwave digestion, were compared in terms of recovery rate, accuracy, and precision for both manganese and chromium. Both methods produced comparable results for the samples prepared for the quality control program. In contrast, concentrations of two heavy metals determined from real workplace samples pretreated with the microwave digestion method were statis tically significantly higher, manganese(166%) and chromium (200%), than those of utilizing the acid extraction method. These findings were consistent regardless of types of welding techniques used. The results of this study clearly show the importance of verifying the analytical performances of extraction methods for heavy metals not only for the samples from the quality control program but also from the real world samples collected from welding jobs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.4
• /
• pp.687-692
• /
• 1998

To use onion(Allium cepa L.) residue as raw materials of food product, yields of onion-juice according to various extracting methods and optimal extracting condition of quercetin and its related glycosides were carried out. Onion juices gained by the methods of pressing, rotary crushing, freeze pressing and enzyme treatment. The yield by the method of enzyme treatment was higher than others. The yields of juice from fresh onion and heat-treated onion(8$0^{\circ}C$/10min) by pressing were 66% and 83%, respectively. Ethanol extraction of onion was efficient at 75$^{\circ}C$ and acetic acid extraction was proper at 3% concentration for 3 hours at 11$0^{\circ}C$. The onion extract was fractionated in the order of hexane, chloroform, ethylacetate and butanol to test flavonoids. The highest abundant flavonoids were found in ethylacetate and butanol fraction.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.183-189
• /
• 2011

This is a study on methods for designers of furniture and products to generate and develop design concept in consideration of design and existing conditions of the space when they design street furniture. In particular, in case when they participate in a process of designing new space, this study aims to reveal methods generating strategic elements and basic ideas for designing street furniture through cases study of projects by understanding and analyzing concept of overall space design and by extracting artistic elements for deployment of specific designs. First, Design DNA, which decides overall flow of design concept of street furniture, is extracted through analyses of basic concepts of space design. Next, by applying 3V Design Process, alternatives of the concept generation are suggested through methods of storytelling and design language under the two approach methods of verbalization stage and visualization stage. Also its methods were explored through suggestion of designs by developing each idea of the respective concepts into specific design vocabulary.

• The Korea Journal of Herbology
• /
• v.26 no.4
• /
• pp.89-94
• /
• 2011

Objective : Kyenegum has been frequently used for characterizing digestive symptoms in the traditional and oriental medicines. This study was conducted to investigate the characteristics of extracts from velvet antlers using the 4 different kinds of extracting methods. Methods : The extracts of velvet antlers were extracted using a $65^{\circ}C$ DW (9hrs), a Kyenegum crude enzyme, a $121^{\circ}C$ DW (2hrs), and a Kyenegum protease. To evaluate the characteristic of velvet antler extracts, we examined the brix, soluble solid, amino acid, mineral composition, and collagen protein. Results : As a result of the comparisons of velvet antlers extracted by the traditional extraction and the crude enzyme of kyenegum, the brix and soluble solid showed the higher contents for kyenegum enzymes. Also, mineral contents of the extracted velvet antlers were higher, particularly in Ca and P for those. The contents of collagen protein, hydroxyproline and hydroxylysine, were found to be more than twice in kyenegum protease compared with other extracting methods. Conclusion : These results indicated that the Kyenegum crude enzyme and protease are very effective to extract of velvet antlers.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.188-200
• /
• 2019

Rubber articles contain various organic additives such as antidegradants, curing agents, and processing aids. It is important to extract and analyze these organic additives. In this paper, various extraction methods of organic additives present in rubber composites were introduced (solvent extraction, Soxhlet extraction, headspace extraction, and solid-phase microextraction), and the extracts were characterized using gas chromatography/mass spectrometry (GC/MS). Solvent and Soxhlet extractions are easy-to-perform and commonly used methods. Efficiency of solvent extraction varies according to the type of solvent used and the extraction conditions. Soxhlet extraction requires a large volume of solvent. Headspace sampling is suitable for extracting volatile organic compounds, while solid-phase extraction is suitable for extracting specific chemicals. GC/MS is generally used for characterizing the extract of a rubber composite because most components of the extract are volatile and have low molecular weights. Identification methods of chemical structures of the components separated by GC column were also introduced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.151-154
• /
• 2008

In this paper, this program which is Retrieval System using Image Gray-scale histogram and Edge features is used to reduce the errors incurred by inputting methods which are used in a current Retrieval System. The Retrieval Algorithm is proceeding with several steps which are extracting features of images quality, extracting edge features and refining images, analysing extracted features, retaining important information from analyzed features, retrieving retained information from database, extracting and comparing among images from retrieved database. The proposed Retrieval System is used for a fast retrieval with accuracy and it is confirmed through simulations.