• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.755-756
• /
• 2006

In this paper, We design the high performance 2D product Iterative decoder using three different external value design. We improved the external value operation in two ways to reduce the delay and speed. In this proposed operation, each design has been simulated on Matlab and MaxPlusII, and implemented on the FPGA to measure their performance.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.3
• /
• pp.15-19
• /
• 2003

For the purpose of standardization of the critical current measurement, it is meaningful to describe how $I_{c}$ will behave as the stress/strain level changes. In this study, strain dependencies of the critical current $I_{c}$ in Ag-alloy sheathed multifilamentary Bi(2212) and Bi(2223) superconducting tapes were evaluated at 77K, 0T. The external reinforcement was accomplished by soldering AgMgNi alloy tapes onto single or both sides of the sample. With the external reinforcement to the Bi(2212) tape, the strength of the tapes increased but the critical current at the strain free state, $I_{c0}$ decreased in some cases. The strain for onset of the $I_{c}$ degradation, $\varepsilon$$_{\irr}$, increased with an increase of the reinforcing volume and then saturated to a certain value. The effect of external reinforcement on the degradation of $I_{c}$ due to the bending strain in the Bi(2223) tape was also examined. Contrary to the expectation, it showed a significant $I_{c}$ degradation even at a small strain of 0.4 %. The observations of damage morphologies gave a good explanation to the $I_{c}$ behavior.c/ behavior.r.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.275-279
• /
• 1996

In this study, the effect of external restraint on the thermal stresses and thermal cracking mode in mass concrete are analysed using the two major factors affecting external restraint such as the ratio of width go height of the placed structure (L/H) and the elastic modulus of base structure (E). For this parametric study, many cases with different values of L/H and Er are analysed by the FEM program and the co-relationship of the those major factors is examined. To evaluate the effect of external restraint on the thermal behavior of placing structure, internal restraint stress caused by temperature difference is subtracted from total thermal stress. In the case of small value of L/H or Er, it shows as internally restricted mode indicating maximum tensile stress in surface at early age, and the external restraint makes the possibility of thermal cracking higher. However, in the case of the large values of L/H and Er, the crack index at center is smaller than at surface due to the effect of external restraint. Thus, the initial location of the thermal crack is shifted from the surface to the center and the resulting crack is formed at later age.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.122-129
• /
• 2021

Purpose: This study aimed to design a multipurpose dose verification phantom for external audits to secure safe and optimal radiation therapy. Methods: In this study, we used International Atomic Energy Agency (IAEA) LiF powder thermoluminescence dosimeter (TLD), which is generally used in the therapeutic radiation dose assurance project. The newly designed multipurpose phantom (MPP) consists of a container filled with water, a TLD holder, and two water-pressing covers. The size of the phantom was designed to be sufficient (30×30×30 cm³). The water container was filled with water and pressed with the cover for normal incidence to be fixed. The surface of the MPP was devised to maintain the same distance from the source at all times, even in the case of oblique incidence regardless of the water level. The MPP was irradiated with 6, 10, and 15 MV photon beams from Varian Linear Accelerator and measured by a 1.25 cm³ ionization chamber to get the correction factors. Monte Carlo (MC) simulation was also used to compare the measurements. Results: The result obtained by MC had a relatively high uncertainty of 1% at the dosimetry point, but it showed a correction factor value of 1.3% at the 5 cm point. The energy dependence was large at 6 MV and small at 15 MV. Various dosimetric parameters for external audits can be performed within an hour. Conclusions: The results allow an objective comparison of the quality assurance (QA) of individual hospitals. Therefore, this can be employed for external audits or QA systems in radiation therapy institutions.

• Journal of the Korean Society for Library and Information Science
• /
• v.39 no.3
• /
• pp.5-25
• /
• 2005

The most important goal of records management is to document the administrative responsibility of the institution producing records and its history. For this purpose, each institution needs to make a plan determining kind and value of phenomena and evidences to be documented, that is, a plan for documentation. This study was aimed to present its necessity and stretagy, focussing on the documentation of correlations with external factors surrounding National Assembly (external relations). Through literature survey, external relation functions of congress and important sources associated with their functions were analyzed. and what records were produced from those sources was investigated in the case of U.S. Congress. Comparing with the present state of National Assembly on this basis, four significant subjects to activate the external relations documentation plan in the point of institutional policy of National Assembly were proposed : legislation of documentation program of external relations, acquisition policy, advocacy enforcement for National Assembly Documentation, and establishment of cooperation and support systems with external factors.

• Annals of Clinical Neurophysiology
• /
• v.4 no.1
• /
• pp.28-33
• /
• 2002

Backgrounds and objective : EEG reflect dynamic changes of continuous neuronal activities by internal and external stimuli. The aim of this study is to quantify nonlinearly the local dynamic differences among EEG data corresponding to different states of brain. Methods : EEG was recorded from twelve healthy normal subjects(mean age, 29.7 years; 8 men and 4 women) using digital EEG machine. 18-channel EEG data were selected during eyes closed(EC), eyes open(EO), and mental arithmetic(MA) in each subject. Correlation dimension(D2) and largest Lyapunov exponent(LLE) were calculated from three states and average value was mapped 2 dimensionally and compared with each other. Results : The distribution of D2 was relatively symmetric and its value was higher in frontal than in parieto-occipital region during EC. These findings were reversed during EO. Bilateral centro-temporo-parietal region showed high D2 value in MA compared with those in EC, which was more prominent in left side. LLE was larger than zero in all state and showed significant differences among EC, EO and MA(p=0.000). Conclusion : These results suggest that nonlinear analysis of EEG can quantify dynamic state of brain.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.s01
• /
• pp.124-138
• /
• 1988

This paper comprised a review of published literature dealing with the evaluation of tobacco quality and usability. Evaluation of tobacco quality and usability seems to be difficult not only due to our inability to define them in simple and easily measurable term but also due to their relations to the profitability of tobacco companies and safety of comsumers. Chemical constituents and smoking taste and aroma of the tobacco represent the underlying basis for tobacco quality: however, tobacco is still purchased upon its physical appearance. Grade and value system is very convenient for evaluating the tobacco quality, if the system is based on the triangular relationship of physical appearance, chemical and smoking properties of tobacco, and also based on intrinsic quality of the tobacco independent of external influences. Grade and value system for tobacco in Korea is thought to be influenced by external factors besides intrinsic quality. Therefore, we have to concern new systems that could be supplement to, or replacement for currently available grade and value system.

• Journal of The Korean Association For Science Education
• /
• v.22 no.4
• /
• pp.806-819
• /
• 2002

The purpose of this study was to investigate students' and teachers' views on the necessity of learning science in Korea. To grade sixth students(n=565) and teachers(n=57) of elementary schools in Seoul, Korea, a question, "Why do we have to learn science?", requiring a short essay of more than 7 lines including the reason and examples was given. From the analysis of short essays with the network analysis, it was found that most students and teachers had views of "we have to learn science to make personal everyday-life easy in aspect of personal usefulness and human everyday-life easy in aspect of social usefulness" with focusing on external value of science and taking examples of everyday-life related. And it was found that students' and teachers' views were somewhat biased toward focusing on external values of science.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.3
• /
• pp.457-466
• /
• 2009

The purpose of this study is to research the similarity and difference of color application in culture of Korea and China. The subject of this research is the costume color of Changgeuk and Beijing opera. First, a bibliographical inquiry includes the attributes of cultural color in Korea and China and the costume attributes of Changgeuk and Beijing opera. Second, this survey analyzes Munsell's 3 attributes(Hue, Value, Chroma), tone by extracted color data. The results of this study are as follows: 1. The cultural color factors of Korea and China are classified geographical factor, internal cultural factor and external cultural factor. 2. Changgeuk costume much more used high value and medium & low chroma for korean temperate climate. But Beijing opera costume prefers high-medium value and low chroma color, various ranges of color because of China huge land and various climates, as geographical factor. 3. Changgeuk costume much more used YR color(no-dyeing color) because of korean white robe preference. Beijing opera costume much more used R color than Changgeuk costume because of traditional preference of R color, as infernal cultural factor. 4. Changgeuk costume and Beijing opera costume show the practical use of ascetic cole. like as jade green. Ojungsaek much less used than Obangsaek by the theory of exponents of the five elements doctrine, as external cultural factor.

• Structural Engineering and Mechanics
• /
• v.82 no.5
• /
• pp.595-609
• /
• 2022

Prestressed composite steel-concrete beams are still a technology restricted to repair sites of large-scale structures and spans. One of the reasons for that is the absence of standard frameworks and publications regarding their design and implementation. In addition, the primary normative codes do not address this subject directly, which might be related to a scarcity of papers indicating methods of design that would align the two technics, composite beams and external prestressing. In this context, this paper proposes methods to analyze the sizing of prestressed composite beams submitted to pre-tension and post-tension with a straight or polynomial layout cable. This inquiry inspected a hundred and twenty models of prestressed composite beams according to its prestressing technology and the eccentricity and value of the prestressing force. The evaluation also included the ratio between span and height of the steel profile, thickness and typology of the concrete slab, and layout of the prestressing cables. As for the results, it was observed that the eccentricity of the prestressing force doesn't significantly influence the bending resistance. In prestressed composite beams subjected to a sagging moment, the ratio L/d can reach 35 and 30 for steel-concrete composite slabs and solid concrete slabs, respectively. Considering the negative bending moment resistance, the value of the L/d ratio must be less than or equal to 25, regardless of the type of slab. When it comes to the value of the prestressing force, a variation greater than 10% causes a 2.6% increase in the positive bending moment resistance and a 4% decrease in the negative bending moment resistance. The pre-tensioned composite beams showed a superior response to flexural-compression and excessive compression limit states than the post-tensioned ones.