• Asian Journal of Innovation and Policy
• /
• v.5 no.2
• /
• pp.208-224
• /
• 2016

The Korean government considers expanding the WtE share of total energy from 1% to 5% by 2020 through research and development (R&D) in waste-to-energy (WtE) technologies. This study attempts to measure the external benefits of investing in R&D in these technologies. To this end, a contingent valuation (CV) is employed. More specifically, a 2016 national survey of randomly selected 1,000 households was carried out across the nation to gauge the willingness to pay (WTP) for the investment. One-and-one-half-bounded dichotomous choice question was used in the CV survey, and the spike model was applied to dealing with zero WTP responses. The mean yearly WTP is estimated to be KRW 4,175 (USD 3.57) per household, which is statistically significant at the 1% level. Expanding the value to the entire nation translates into an investment of about KRW 79.1 billion (USD 67.6 million), which can be interpreted as the annual external benefit of the R&D investment in WtE technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2065-2071
• /
• 2011

The external quality factor ($Q_e$) is controlled by coupling condition between resonator and input/output ports in design of microwave filter. In this paper, we represent extracting method of external quality factor using phase response for resonator with input/output ports according to position of feed line from microstrip line resonator. The results regarding to position, coupling gap and line width for tapped line and coupled line structure are represented, and we got the exact $Q_e$ value from the this method. This results will be applied to coupled resonator filter design.

• Korean Journal of Materials Research
• /
• v.12 no.7
• /
• pp.580-586
• /
• 2002

The effect of processing and designing variables such as pouring temperature(1400 or $1500^{\circ}C$), inoculation and risering design(T and H type) on the formation of defects such as external depression, primary and secondary shrinkage cavities in GC150 gray cast iron was investigated. In T type risering design, external depression or primary shrinkage cavity due to liquid contraction was formed in all of the eight cases. Regardless of its modulus value, the riser could not function properly in T type risering design because directional solidification was not promoted toward the riser. On the other hand, the four cases of H type risering design in which thermal sleeves were set onto the risers produced defect-free castings. In both types of the risering designs, secondary shrinkage cavity caused by solidification contraction was not observed in the casting because of the expansion pressure due to graphite precipitation and the application of rigid pep-set mold. The degree of external depression or primary shrinkage cavity was reduced with lowered pouring temperature. The effect of inoculation was diminished because of the high carbon equivalent of GC 150 gray cast iron.

• Journal of Distribution Research
• /
• v.1 no.1
• /
• pp.83-107
• /
• 1996

The concern of external environment is growing up in the field of channel distribution. In the former channel distribution, the channel distribution environment is little bit unmoveable owing to a powerful manufacture control against poor distributor. Therefore intra-efficiency is channel member's core interest. The structure of channel governance, however, come to be changable because of the mature distributor power against manufacturer such as a Price Break, JIT of channel governance, and a serial of change. Accordingly, it is acceptable that the interest of external-environment of channel members' is more and more enlarged, and external-environment change in the channel distribution make the serious problems in intraorganizational system. Thus, it is meaningful that this study try to discover the consumer power as external environment factor and to find the best strategy to overcome this consumer power. Resource dependence theory, Transaction cost theory, Political Economic Approach, and Working partnership Approach are the theory foundation of the reasearch. Apparel franchise is a sample to analyse the hypothesis and correlation and multi-regression are a chief tools to estimate the hypothesis. Thus, the above results imply that a flexible governance is appropriate to consumer power, conflict is not intervening value between consumer power and channel governance, and the channel member's satisfaction can be confirmed in the flexible governance better than control governance.

• Journal of Korea Trade
• /
• v.25 no.2
• /
• pp.134-151
• /
• 2021

Purpose - This study empirically analyzes the impact of the internal and external network embeddedness of foreign subsidiaries and local market characteristics of the host country on the CEO selection whether or not to appoint an expatriate as the CEO of a foreign subsidiary. Design/methodology - To conduct an empirical analysis, we obtained a list of the headquarters of Korean MNCs from the Korea Chamber of Commerce and Industry. Based on the list of HQs, we identified a final list of overseas subsidiaries of Korean MNCs that have entered the world from KOTRA (Trade-Investment Promotion Agency for Korea). Then we conducted an empirical analysis based on the results of 391 questionnaires by employing logistic regression analysis. Findings - The results of empirical analysis are as follows. First, the higher the subsidiary's internal network embeddedness, the higher the tendency appoint an expatriate as the CEO. Second, the higher the volatility of the local market, the higher the tendency to appoint an expatriate as the CEO. Third, the stronger the competition in the local market, the lower the tendency to appoint a PCN. Originality/value - This study has significant theoretical implications in that it examines the link between the internal and external embeddedness of overseas subsidiaries and the appointment of parent country nationals (PCNs) as the CEO that prior research has not examined.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.313-315
• /
• 2009

In this thesis, A methodology of system implement for PID controller, PWM logic, HSC logic, Host Communication and external DAC interface are implemented into single FPGA chip is proposed. The implemented system is used to control the speed of DC servo motor. A DATA block transfers set point value(SV) and P, I, D gain parameters to the corresponding Blocks respectively by the Host Communication to Computer. A HSC block generates process value(PV) by a pulse and $90^{\circ}$ shifted pulse from the encoder A PID block makes error(E) signal from the set value and process value and output manufacture value(MV) through the PID controller. In PWM block using the MV from the PID block, drives H-bridge controlling the Motor. Also DAC interface controls the DAC to graph the digital signal such as SV, PV, E, MV in FPGA onto the Oscilloscope.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.2
• /
• pp.126-132
• /
• 2014

PURPOSE. This study was conducted to evaluate the influence of the implant-abutment connection design and diameter on the screw joint stability. MATERIALS AND METHODS. Regular and wide-diameter implant systems with three different joint connection designs: an external butt joint, a one-stage internal cone, and a two-stage internal cone were divided into seven groups (n=5, in each group). The initial removal torque values of the abutment screw were measured with a digital torque gauge. The postload removal torque values were measured after 100,000 cycles of a 150 N and a 10 Hz cyclic load had been applied. Subsequently, the rates of the initial and postload removal torque losses were calculated to evaluate the effect of the joint connection design and diameter on the screw joint stability. Each group was compared using Kruskal-Wallis test and Mann-Whitney U test as post-hoc test (${\alpha}$=0.05). RESULTS. The postload removal torque value was high in the following order with regard to magnitude: two-stage internal cone, one-stage internal cone, and external butt joint systems. In the regular-diameter group, the external butt joint and one-stage internal cone systems showed lower postload removal torque loss rates than the two-stage internal cone system. In the wide-diameter group, the external butt joint system showed a lower loss rate than the one-stage internal cone and two-stage internal cone systems. In the two-stage internal cone system, the wide-diameter group showed a significantly lower loss rate than the regular-diameter group (P<.05). CONCLUSION. The results of this study showed that the external butt joint was more advantageous than the internal cone in terms of the postload removal torque loss. For the difference in the implant diameter, a wide diameter was more advantageous in terms of the torque loss rate.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.747-754
• /
• 2014

In spite of its usefulness for health monitoring of structures on steady external load, the statistical pattern recognition technology (SPRT), based on Mahalanobis distance theory (MDT), is not good enough for the health monitoring of structures on large variability external load like earthquake. Damage is usually determined by the difference between the average measured value of undamaged structure and the measure value of damaged one. So when external variability gets larger, the difference gets bigger along, which is thus easily mistaken for a damage. This paper aims to overcome the problem and develop an improved Mahalanobis distance theory (IMDT), that is, a SPRT with revised MDT in order to decrease external variability so that we will be able to continue to monitor the structure on uncertain external variability. This method is experimentally tested to see if it precisely evaluates the health of a cable-stayed bridge on each general random load and earthquake load. As a result, the IMDT is found to be valid in locating structural damage made by damaged cables by means of data from undamaged cables. So it is proved to be effectively applicable to the health monitoring of bridges on external load of variability.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.465-471
• /
• 2016

PURPOSE. The purpose of this study is to evaluate the stability of interface between Co-Cr-Mo (CCM) UCLA abutment and external hex implant. MATERIALS AND METHODS. Sixteen external hex implant fixtures were assigned to two groups (CCM and Gold group) and were embedded in molds using clear acrylic resin. Screw-retained prostheses were constructed using CCM UCLA abutment and Gold UCLA abutment. The external implant fixture and screw-retained prostheses were connected using abutment screws. After the abutments were tightened to 30 Ncm torque, 5 kg thermocyclic functional loading was applied by chewing simulator. A target of $1.0{\times}10^6$cycles was applied. After cyclic loading, removal torque values were recorded using a driving torque tester, and the interface between implant fixture and abutment was evaluated by scanning electronic microscope (SEM). The means and standard deviations (SD) between the CCM and Gold groups were analyzed with independent t-test at the significance level of 0.05. RESULTS. Fractures of crowns, abutments, abutment screws, and fixtures and loosening of abutment screws were not observed after thermocyclic loading. There were no statistically significant differences at the recorded removal torque values between CCM and Gold groups (P>.05). SEM analysis revealed that remarkable wear patterns were observed at the abutment interface only for Gold UCLA abutments. Those patterns were not observed for other specimens. CONCLUSION. Within the limit of this study, CCM UCLA abutment has no statistically significant difference in the stability of interface with external hex implant, compared with Gold UCLA abutment.

• Journal of Korea Trade
• /
• v.23 no.4
• /
• pp.80-102
• /
• 2019

Purpose - This paper aims to articulate relationship about factors influencing FTA utilization by dividing them into company's external and internal factors and performing investigation on the relationship between FTA utilization and export performance. Design/methodology - This study verified factors influencing FTA utilization by dividing them into company's external and internal factors and performing investigation on the relationship between FTA utilization and export performance. Empirical analysis was performed by setting internal and external factors required for FTA utilization as variables. To achieve this, research model was established based on previous study, hypothesis was deduced, and statistical program were used to test the hypothesis. This study performed empirical analysis using statistical program of SPSS 18.0 and AMOS 18.0 for the research model. Findings - Empirical analysis was performed regarding the effect of the FTA utilization on export performance and previous study defined export performance as the company's increased economy benefits through export and increase in new transactions. Analysis was also performed for factors affecting the FTA utilization by the company and through management and response of external factors and internal factors it was confirmed that the FTA utilization by the company led to increase in the company's export performance as a result. This study proposes a method to achieve export performance based on this. Originality/value - Companies seeking to utilize the FTA sign the Contract for the International Sale of goods and there are many conditions to meet in order to receive trade preferences during the transaction process. Existing trade order and order in the FTA have to be followed. Country of origin can be seen as key in the FTA. The Rule of Origin becomes the most important evaluation standard in applying preferential tariff in the FTA. Such regulations can be seen as external factors which cannot be controlled by the company. Internal factors are capabilities owned before that can be controlled by the company. The study sought to test the variables regarding factors centered on such capability. This study verified factors influencing FTA utilization by dividing them into company's external and internal factors and performing investigation on the relationship between FTA utilization and export performance.