• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.390-397
• /
• 2022

The use of microwaves as the energy source for synthesis and sintering of ceramics offers substantial advantages compared to conventional gas-fired and electric resistance furnaces. Benefits include much shorter processing times and reaching the sintering temperature more quickly, resulting in superior final product quality. Most oxide ceramics poorly interact with microwave irradiation at low temperatures; thus, a more complex setup including a susceptor is needed, which makes the whole process very complicated. This investigation pursued a new approach, which enabled us to use microwave irradiation directly in poorly coupled oxides. In many solid-state electrochemical devices, the support is either metal or can be reduced to metal. Metal powders in the support can act as an internal susceptor and heat the entire cell. Then sufficient interaction of microwave irradiation and ceramic material can occur as the sample temperature increases. This microwave heating and exothermic reaction of oxidation of the support can sinter the ceramic very efficiently without any external susceptor. In this study, yttria stabilized zirconia (YSZ) and a Ni-YSZ cermet support were used as an example. The cermet was used as the support, and a YSZ electrolyte was coated and sintered directly using microwave irradiation without the use of any susceptor. The results were compared to a similar cell prepared using a conventional electric furnace. The leakage test and full cell power measurement results revealed a fully leak-free electrolyte. Scanning electron microscopy and density measurements show that microwave sintered samples have lower open porosity in the electrode support than conventional heat treatment. This technique offers an efficient way to directly use microwave irradiation to sinter thin film ceramics without a susceptor.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권5호
• /
• pp.259-266
• /
• 2014

In this paper, we propose a novel technique for noise robust automatic speech recognition (ASR). The development of ASR techniques has made it possible to recognize isolated words with a near perfect word recognition rate. However, in a highly noisy environment, a distinct mismatch between the trained speech and the test data results in a significantly degraded word recognition rate (WRA). Unlike conventional ASR systems employing Mel-frequency cepstral coefficients (MFCCs) and a hidden Markov model (HMM), this study employ histogram of oriented gradient (HOG) features and a Support Vector Machine (SVM) to ASR tasks to overcome this problem. Our proposed ASR system is less vulnerable to external interference noise, and achieves a higher WRA compared to a conventional ASR system equipped with MFCCs and an HMM. The performance of our proposed ASR system was evaluated using a phonetically balanced word (PBW) set mixed with artificially added noise.

• 아동학회지
• /
• 제29권6호
• /
• pp.105-119
• /
• 2008

Investigating cross-cultural differences of family stress and adaptation in Korea and Australia, 49 families in open adoption were administered the Family Index of Regenerativity and Adaptation-General (McCubbin, 1987), Family Problem Solving Communications (McCubbin et al., 1988), and Social Support Index (McCubbin et al., 1982). Data were analyzed by T-test and correlation analysis. Results indicated that adoption itself was the primary stressor in both countries. Korean adoptive families were under stress by family-oriented factors; Australian adoptive families experienced external family stress. Regarding family hardiness, coping efforts and family communication, Australian adoptive families reported significantly higher family functioning than Korean adoptive families. Findings suggested that a broad range of social support is needed to improve family adaptability in both countries.

• 가정과삶의질연구
• /
• 제19권4호
• /
• pp.167-184
• /
• 2001

The purpose of this study is to investigate actual conditions of family/kin ritual transition and to find out relationships to socio-economic variables. For this purpose, 716 subjects of urban family were interviewed with questionnaires. The results of this study may be summarized as follows: 1. It was discovered the pervasive themes of family/kin ritual transition: westernization, commercialization, socialization, and cultural anomie. 2. In contemporary family/kin rites, traditional structure coexists with external westernized aspects under the influnce of industrialization and commercialization. The rites were continued to provide a place where participants reproduce the ideology of patriarchal family group, especially the strong parent-child ties and narrow kin relationships. 3. Respondents who support traditional ritual style are old, lower class, and Buddhist. 4. Respondents who support westernization and socialization of family/kin rites are young, higher class, and Christian. But family/kin rites are not affected by sex relatively.

• The Journal of Korean Physical Therapy
• /
• 제13권2호
• /
• pp.453-458
• /
• 2001

The aim of this study is to present the basic reference data of age and specific gait parameters for Parkinson's Disease Patients. The basic gait parameters were extracted from 5 patients, 5 men and 65 years of age using VICON 512 Motion Analyzer. The temporal gait parameters and kinematic parameters is data of Parkinson's Disease Patients. The results were as follows; 1. The cadence, velocity, stride length decreased and single limb support period, double limb support period increased than normal adult in the temporal parameters. 2. The mean angles of joint pelvic tilt and hip, knee, ankle joint decreased than normal adult at kinematic characteristics on sagittal plane. 3. The mean angles of joint pelvic tilt and hip, knee joint has no difference than normal adult at kinematic characteristics on coronal plane. 4. The mean angles of joint pelvic tilt, hip joint no difference and internal, external rotation in ankle joint significantly decreased than normal adult at kinematic characteristics on transverse plane.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.233-239
• /
• 2000

Investigation results are presented fur the shaft end displacements due to the elastic deformation of the casing and support in double suction centrifugal pump. Suction and discharge nozzles of the pump are subject to external piping loads and, in API 610, maximum values of their components are specified. This means that each nozzle can be subject to various combinations of loading conditions. Considering upper and lower criteria of each load, we must perform for the 4,096 load cases, and assign the direction and range of the loads. So, this paper develops an efficient procedure(Compliance Coefficient Method) to calculate the shaft end displacements(＠ coupling) to determine whether satisfying the pump's standard. Also, we analyzed the effects of the casing and support thickness on shaft end displacements.

• 전기학회논문지
• /
• 제64권6호
• /
• pp.960-969
• /
• 2015

Over time, the import of seafood has been increased causing a corresponding increase in recall and recall costs of the fishery on the threshold level. In order to reduce recall costs and to ensure the safety of imported seafood, a moveable lab and its supporting software specialized in seafood inspection were designed. A new fishery quarantine support system software, ‘M-LIMS’ is proposed to strengthen an inspection and quarantine process for the imported seafood at the local level. This new software reads data from an external inspection equipment when it is connected to a USB or RS232 cable inspection equipment on a regular basis to save a report sent to the server after its use. Reading was possible by reading records on a central server. Each time users can check own data through a mobile device.

• 한국정보시스템학회지:정보시스템연구
• /
• 제20권3호
• /
• pp.25-40
• /
• 2011

Small and Medium sized hospitals are exposed to severe managerial environments recently. Around 8.0% of the hospitals are bankrupted every year. The adverse managerial environment does not only come from external factors such as patients' preference for larger hospitals, regulations on the medical charges; more serious problems come from the way the medium and small sized hospitals deal with those exogenous changes including lack of management skills, lack of change management skills, lack of managerial decision support systems, etc. This paper aims to support managers to make decisions regarding the exogenous changes. This paper can be interpreted as an attempt of a merge of the two techniques; BSC and system dynamics. Starting with a BSC system, the development of a system dynamics model can take advantages of the BSC information.

• 한국정보시스템학회지:정보시스템연구
• /
• 제6권1호
• /
• pp.257-291
• /
• 1997

Today, executives in the company operate their organizations under highly competitive environments with dynamic technological, economic, and political changes. Under these new environment changes, they play the important role in establishing the future directions and strategic orientations of organizations. In general, executive information systems (EIS) are designed to support these roles of executives. They can help executives access and use the information they require about the organization's internal and external environments. In spite of such potential EIS support for executives, only a limited number of empirical studies have been published in this area. by employing a well-established theory of computer usage behavior (Technology Acceptance Model : TAM), this study systematically investigates the key factors in the successful utilization of an EIS. The empirical results from this study may prove useful for both IS researchers and practitioners.

• 정보기술과데이타베이스저널
• /
• 제3권1호
• /
• pp.45-63
• /
• 1996

This paper presents an integrated object-oriented database approach for managing the evolution of products in agile manufacturing environments, Schema evolution modification facilities are provided to support full potential versioning of type definitions. All of the possible versions for a composite product are not explicitly represented to avoid version proliferation. However, valid configurations of any composite products can be provided to comply with customer demands, The attributes of composite products are classified in order to provide well-defined representation scheme for composite products and to be exploited in version control. The attributes are partitioned into composite-related and non composite-related categories. Composite-related attributes consist of subproducts and description ones. Subproducts attributes represent physical constituents of a composite product. Description attributes represent external features, assembling, and correspondence property. Interface attributes are introduced for managing configurability and version propagation. Version derivations due to the changes to the interface attributes are propagated toward the product composition hierarchy, The validity of configurations of composite products is checked by using configurability maps. Instance objects which represent the actual product instances are stored and manipulated in the database in order to support traceability during product life cycle.