• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.166-169
• /
• 2005

While use of a pet bottle with use it is light recently and convenient increases quickly, it is used from the child, also diffusing the user to a pet bottle to people of various classes, such as an old person, a woman, a male, the man in the street, and a disabled person. However, those who are standardized on the basis of the common man with the plan energy of a pet bottle, and cannot attain to the standard, That is, a child and a disabled person may be condemned to the vague situation that a lid cannot be opened or a contents thing cannot be drunk without external help. And the characteristic of a material and production which are called PET Even if convenience is emphasized for the cost reduction of COST, a design is chosen easily, and even if it calls it the man in the street, the point of coming to experience a situation with the difficult time of use can be found well. In research of a book, problem derivation which classifies entering school and a preschool man-and-woman child for a child drink for an object first by the viewpoint of universal design paying attention to such problems, and leads the actual use example of a pet bottle was carried out in true heart, and various notional approach was shown by the solution method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.10
• /
• pp.1002-1010
• /
• 2015

Natural gas hydrates are newly emerging as an environment-friendly source of energy to substitute for fossil fuels in the 21stcentury.NGHs are reported to holds much amounts of natural gas (up to 182 standard volumes of gas per volume of hydrate); they are easy to store and safe to carry at about minus 20 degree Celsius under atmospheric pressure because of the self-preservation phenomenon of gas hydrates. The transporting method by gas-ice-hydrate ship carriers has been introduced and developed by a variety of industry and research institutions. Our team has been conducted to develop NGH total systems, including a breakthrough NGH carrier for sea transportation, since 2011. The NGH pellet carrier does not require a separate cooling system for cargo, and the initial temperature is maintained through insulation of the cargo tanks throughout the transport to the final destination. The heat conducted from the exterior and passing through the insulation material of the hull should be cut off as much as possible, but heat inflow inside the cargo tank from an external source is inevitable during transport. In this study, the heat transfer in a cargo tank of a 115K NGH carrier was analyzed through simulation with a commercial CFD code to estimate the boil-off gas/boil-off rate on the developed carrier and understand major hazards that could significantly impact the safety of the vessel.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.1
• /
• pp.62-67
• /
• 2005

Recently, polymer insulators that are used for high voltage applications have some advantages such as light weight, small size, vandalism resistance, hydrophobicity and easy making process. During outdoor service of polymer insulators, the surface of the insulating material is frequently subjected to moisture and contamination that lead to dry band arcing. Their tracking resistance, erosion resistance, end sealing and shed design are very important because dry band arcing causes degradation of polymer surface. Aging test to estimate life property of polymer insulator is executed through several international standard such as IEC 61109 and CEA tracking wheel test, but is not getting clear conclusion yet. There are two methods in the diagnosis method of polymer insulator such as off-line and on-line. The diagnosis methods in off-line are external condition analysis by the eye, contaminant analysis on surface, surface analysis, pollution withstand voltage test, power frequency flashover voltage test, lightning impulse flashover test, tensile fracture load test and flexural load test. Polymer material is also investigated it's tracking resistance by adding surface active agent in IEC 587. In this paper, the tracking performance of polymer insulator with salt solution which is added surface active agent. The diagnosis of insulator sample has been analyzed by leakage current and visual examination, STRI guide and thermal image camera.

• Journal of Preventive Medicine and Public Health
• /
• v.44 no.4
• /
• pp.185-189
• /
• 2011

Objectives: In 1995, an outbreak survey in Gozan-dong concluded that an association between fiberglass exposure in drinking water and cancer outbreak cannot be established. This study follows the subjects from a study in 1995 using a data linkage method to examine whether an association existed. The authors will address the potential benefits and methodological issues following outbreak surveys using data linkage, particularly when informed consent is absent. Methods: This is a follow-up study of 697 (30 exposed) individuals out of the original 888 (31 exposed) participants (78.5%) from 1995 to 2007 assessing the cancer outcomes and deaths of these individuals. The National Cancer Registry (KNCR) and death certificate data were linked using the ID numbers of the participants. The standardized incidence ratio (SIR) and standardized mortality ratio (SMR) from cancers were calculated by the KNCR. Results: The SIR values for all cancer or gastrointestinal cancer (GI) occurrences were the lowest in the exposed group (SIR, 0.73; 95% CI, 0.10 to 5.21; 0.00 for GI), while the two control groups (control 1: external, control 2: internal) showed slight increases in their SIR values (SIR, 1.18 and 1.27 for all cancers; 1.62 and 1.46 for GI). All lacked statistical significance. All-cause mortality levels for the three groups showed the same pattern (SMR 0.37, 1.29, and 1.11). Conclusions: This study did not refute a finding of non-association with a 13-year follow-up. Considering that many outbreak surveys are associated with a small sample size and a cross-sectional design, follow-up studies that utilize data linkage should become standard procedure.

• Archives of design research
• /
• v.17 no.1
• /
• pp.135-142
• /
• 2004

This study is an analyze for Casa del Fascio, of Giuseppe Terragni, an important architect of fascism period of Italy. Based on the spot reinvestigation of first copies and unpublished data in a archive for a month of 2002. August, Terragni, Como, to compromise with the limit of studies up to the present. General's from early scheme to final constructed scheme, finally offered standard way to understand Terragni's scheme. Result of analyze are to two conclusions. 1) It has direct bearings between physical environment of site which was to build from original scheme and final decided external form. Especially there is direct relation between facade and composition of Duomo Cathedral, in the center of Como. 2) Although the image for scheme by architect represented as a physical form which was impossible to analyze the data as development sequence from archive, it influences on the first image, which had changed many times, exists as important element to final constructed scheme.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2018

Objective: The purpose of this study is to investigate the differences in biomechanical variables of golf driving motion according to gender. Method: A total of 21 healthy golfers (11 men and 10 women) who have more than 5 years of professional experience and have been registered in the Korea Golf Association was recruited. A 250-Hz 8-camera motion capture system (MX-T20, Vicon, LA, USA) was used to capture the motion trajectories of a total of 42 reflective markers attached to the golfer's body and club. Moreover, two 1,000-Hz AMTI force plates (AMTI OR6-7-400, AMTI, MA, USA) were used to measure the ground reaction force. The mean and standard deviation for each parameter were then calculated for both groups of 21 subjects. SPSS Windows version 23.0 was used for statistical analysis. The independent t-test was used to determine the differences between groups. An alpha level of .05 was utilized in all tests. Results: There were differences in joint angles according to gender during golf driver swing. Men showed a statistically significantly higher peak joint angle and maximum range of angle in sagittal and frontal axis of the pelvis, hip, and knee. Moreover, women's swing of the pelvis and hips was found to have a pattern using the peak joint angle and range of angle in the vertical axis of the pelvis and hip. There were the differences in peak joint moment according to gender during golf driver swing. Men used higher joint moment in the downswing phase than women in the extensor, abductor, and external rotator muscles of the right hip; flexor and adductor muscles of left hip joint; and flexor and extensor muscles of the right knee. Conclusion: This result reveals that male golfers conducted driver swing using stronger force of the lower body and ground reaction force based on strength of hip and thigh than female golfers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.1
• /
• pp.137-142
• /
• 2019

There are two methods for evaluating two or more mutually exclusive projects. One is a total investment approach and the other is an incremental investment approach. The former can rank projects by the criterion of the net present value, but the latter can't do it. An incremental investment approach is only possible when all pairwise alternatives are compared. Thus an incremental investment approach is superior in ranking them over an incremental investment approach. To do so, a principle of comparison must be established. Comparisons of profitability are reasonable when operating the same amount of investment over the same period of time. One principle is that all projects are invested in the largest of the projects. Another principle is that all projects are invested during the longest project life of the projects. In this paper, even if the principle is followed, it will be shown that the external rate of return fails to rank them. However, the productive rate of return criterion would prove to be able to rank them like the net present value standard, provided that the principle of comparison is kept. In addition, rate of returns can be assessed so that all mutually exclusive projects can be compared at once, such as on the criterion of the net present value. That is, it can be also compared with many other returns, such as the profit rates on financial investments or real investments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.10
• /
• pp.1416-1426
• /
• 2021

In the case of a scanning type multi-channel LiDAR sensor, the distance error called a walk error may occur due to a difference in received signal power. This work error causes different distance values to be output for the same object when scanning the surrounding environment based on multiple LiDAR sensors. For minimizing walk error in overlapping regions when scanning all directions using multiple sensors, to calibrate distance for each channels using convolution on external system. Four sensors were placed in the center of 6×6 m environment and scanned around. As a result of applying the proposed filtering method, the distance error could be improved by about 68% from average of 0.5125 m to 0.16 m, and the standard deviation could be improved by about 48% from average of 0.0591 to 0.030675.

• PNF and Movement
• /
• v.10 no.1
• /
• pp.61-70
• /
• 2012

Purpose : The purpose of this study was to investigate thigh muscle-bone CSA and leg strength during low-intensity exercise program with leg blood flow restriction by external compression to reduce muscle outflow. Methods : Eighteen health students gave informed written consent to participate in this investigation. An occlusion cuff was attached to the proximal end of the leg so that blood flow was reduced during the training. The training was conducted one times a day, three times a week, for 8 weeks using one sets of 30 minutes. The training program performed to squat with standing, lunge with standing and heel raise with one leg standing. Measurements of thigh muscle-bone CSA(cross-sectional area) and leg strength were evaluated pre and post-training. Statistical evaluation of these data was accomplished utilizing a paired t-test by SPSS 12.0 program for windows. Significance level was set at p <.05. Results : All data are reported as means and standard deviations(SD) for all variables. The result of the study is followed; After the training, muscle-bone CSA, gluteus maximus m, quadriceps m, hamstring m of both legs were significantly improved but not calf muscle(p<.05). There was no significant difference of change quantity between muscle-bone CSA and leg strength in Lt. and Rt. side. But the variation in leg muscle strength of Rt. leg(dominant) was much more increased than Lt. leg(non-dominant) after 8 weeks training. Conclusion : Low-intensity training with leg blood flow restriction offers a potentially useful method for improving leg muscle strength.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.4
• /
• pp.307-321
• /
• 2020

Purpose : A person infected by SARS-CoV2 may present various symptoms such as fever, pain in lower respiratory tract, and pneumonia. Measuring body temperature is a simple method to screen patients. However, changes in the surrounding environment may cause errors in infrared measurement. Hence, a non-contact thermometer controls this error by setting a correction value, but it is difficult to correct it for all environments. Therefore, we investigate device error values according to changes in the surrounding environment (temperature and humidity) and propose guidelines for reliable patient detection. Methods : For this study, the temperature was measured using three types of non-contact thermometers. For accurate temperature measurement, we used a water bath kept at a constant temperature. During temperature measurement, we ensured that the temperature and humidity were maintained using a thermo-hygrometer. The conditions of the surrounding environment were changed by an air conditioner, humidifier, warmer, and dehumidifier. Results : The temperature of the water bath was measured using a non-contact thermometer kept at various distances ranging from 3~10 cm. The value measured by the non-contact thermometer was then verified using a mercury thermometer, and the difference between the measured temperatures was compared. It was observed that at normal surrounding temperature (24 ℃), there was no difference between the values when the non-contact thermometer was kept at 3 cm. However, as the distance of the non-contact thermometer was increased from the water bath, the recorded temperature was significantly different compared with that of mercury thermometer. Moreover, temperature measurements were conducted at different surrounding temperatures and the results obtained significantly varied from when the thermometer was kept at 3 cm. Additionally, it was observed that the effect on temperature decreases with an increase in humidity Conclusion : In conclusion, non-contact thermometers are lower in lower temperature and dry weather in winter.