• 제목/요약/키워드: external forces

검색결과 730건 처리시간 0.023초

국내항공법상 항공안전관리 제도변화에 관한 연구 (A Study on the Institutional Changes in the Aviation Safety Management System in Korea)

  • 김맹선
    • 항공우주정책ㆍ법학회지
    • /
    • 제23권2호
    • /
    • pp.93-114
    • /
    • 2008
  • 항공기는 편리하고 신속한 교통수단으로 세계화의 급속한 진전에 따라 19세기 후반 중요한 교통수단으로 발전되었다. 대규모의 물류 유통과 관광 및 사업으로 인적교류가 급속히 증대됨에 따라 항공교통의 비약적인 발전은 현대사회의 특징으로 볼 수 있다. 하지만 항공교통의 발전은 항공사고의 가능성을 높여주고 있고, 기존의 항공안전관리체계에 대한 제도적인 특성이 유지될 때에 심각한 항공사고 위험의 잠재성을 내포하게 된다. 따라서 항공안전관리제도에 대한 획기적인 대책이 요구되고 각국은 이에 대한 정책적 대응을 서두르고 있다. 한국도 예외는 아니어서 항공산업의 비약적 증가에 따른 항공안전 관리 체계의 적절한 정책 대응이 필요했지만 이에 효과적으로 대응하지 못해 많은 항공기 사고를 경험해 왔다. 본 연구는 국내 민간항공기의 사고가 지속적으로 발생하고 국제규범의 압력이 지속적으로 나타날 때 항공안전제도의 변화가 어떻게 나타나는가를 분석해 보고자 하였다. 일반적으로 정책은 제도의 지속성으로 인하여 항공사고와 국제규범의 압력이 있어도 쉽게 안 바뀌려고 한다. 그러나 항공기 사고와 국제규범의 압력과 함께 이러한 문제에 대해 정치권과 언론이 심각성을 인식하고 지속적이며 강력하게 항공안전관리체계의 획기적인 개선을 주장하게 되면 그러한 요구가 매개변수가 되어 어느 순간에 제도는 획기적으로 변화하게 된다. 이러한 특성을 가진 항공안전관리제도변화의 특성을 규명하고자 역사적 신제도주의 관점에서 제도변화를 시기별로 분석하였다.

  • PDF

전시작전통제권 단독 행사 추진의 방향 (Directions in Promoting Independence in Operational Control)

  • 박승식
    • 안보군사학연구
    • /
    • 통권4호
    • /
    • pp.351-379
    • /
    • 2006
  • Former ministers of national defense and foreign affairs, intellectuals such as former and incumbent professors, and various NGO groups are demanding the South Korean government to stop promoting independence in operational control which is currently held by the United States Armed Forces in Korea commander. Although the Korea should exercise operational control independently in the future, orientation on the direction which should be taken under consideration in promoting this transfer should be assumed. First of all, South Korea must sufficiently examine the criticisms and dissenting opinions, and reflect them in promoting independence in operational control. From now on, the South Korean government should reflect the opinions of experts in operational control, and must promote the transfer with national consensus. Unilateral enforcement of the transfer may cause serious errors and aggravate conflicts Second, ROKA's exercise of independence in operational control should take place only after gaining restraint on North Korea's attack against the South, and the issues on nuclear weapons and weapons of mass destruction(WMD) has been resolved, and a peace regime has been reached. Furthermore, exercise of independence in wartime operational control should be promoted only if there is a guarantee that international trust and the military collaboration will be restored to a level beyond the present state. Third, the USFK and the Korean-US alliance is providing South Korea with national security, not to mention tremendous diplomatical, and economical benefits However, if the alliance between the two countries become weakened due to the exercise of the independence in operational control, we might suffer a great deal of loss. Even though reasonable justification and external independence may be gained through promoting independence in operational control, it should be promoted in a longitudinal manner because national security problems and conflicts may be intensified, and there is no actual profit in doing so. Fourth, if the Korean-US alliance becomes weakened and therefore the United States decides to discuss eastern-asia strategies, North Korea deterrence strategies, and Japanese rearmament issues with other neighboring countries, South Korea may become diplomatically isolated and a subordinate to surrounding countries, destroying the independence we have now instead of restoring it Therefore searching for means to reinforce international trust and collaboration between South Korea and the United States, and leaving ROKA’s independence in operational control as a long term objective would be a more realistic method.

  • PDF

유한요소법을 이용한 전부주조관의 교합점 위치와 하중방향이 시멘트층 내 응력에 미치는 영향 (Characterization of the Stresses in the Luting Cement Layer Affected by Location of the Occlusal Points and Loading Direction on a Full Veneer Crown)

  • 이정훈;이규복;이청희;조광헌
    • 구강회복응용과학지
    • /
    • 제24권4호
    • /
    • pp.317-324
    • /
    • 2008
  • 이 논문의 목적은 전부주조관에서 교합점의 위치와 교합력의 방향이 합착용 시멘트층 내의 응력에 미치는 영향에 대해서 알아보는 것이다. 하악 제 1대구치상에서 서로 다른 9 개의 교합점과 3가지 교합력 방향을 가진 27가지 조합의 유한요소 모델을 상정하였다. 금관의 소재는 제 3형 금합금이고, 변연의 형태는 chamfer이다. 합착용 시멘트로는 전 층에서 균일하게 $70{\mu}m$의 두께를 가지는 글라스 아이오노머 시멘트가 사용되었다. 금관에는 100N의 하중을 적용하였다. 협측과 설측 변연의 근접도에 따라서 시멘트층 내 응력은 다른 양상을 나타내었다. 협측은 변연으로부터 약 0.5 mm, 설측은 변연으로부터 약 1 mm 내측에서 최대 응력 값을 가졌다. 하중 방향이 치축에 대해 경사가 클수록, 하중점이 교두첨에 근접해 있을수록 더 큰 응력이 발생하였다.

전용부두 계류중인 실습선의 선체거동 해석 및 제어에 관한 연구 (Behavior Analysis and Control of a Moored Training Ship in an Exclusive Wharf)

  • 조익순
    • 해양환경안전학회지
    • /
    • 제23권2호
    • /
    • pp.139-145
    • /
    • 2017
  • 최근 이상적인 자연현상으로 인해 돌풍, 태풍 및 쓰나미 등 비상상황이 자주 발생하고 있고, 이로 인해 항내 계류선박은 선체거동을 미리 예측하여 해석하고, 선체거동을 제어하지 못해 계류선박의 계류시스템이 손상되면 해양사고가 발생할 수 있다. 따라서 계류시스템의 손상이 예상되는 경우 정량적 판단에 의해 항내 계류할 것인지 아니면 항외로 피항할 것인지 결정할 필요가 있다. 본 연구에서는 외력에 의한 계류선박의 거동해석 및 계류시스템 제어를 위해 대학내 전용 부두에 계류중인 실습선을 대상으로 계류안전성을 평가하였다. 계류삭의 최대장력을 분석한 결과, 파주기 12초 및 15초인 경우에는 대부분 허용강도(S.W.L)를 초과하는 것으로 분석되었다. 계선주에 작용하는 최대견인력을 분석한 결과, 해당 위치에 설치된 지 노후화된 소형 계선주에 다수의 계류삭을 체결함으로서 모든 평가 Case에서 계선주 허용규격인 35톤을 초과하는 것으로 분석되었다. 선체동요 및 하역안전성 평가결과 파주기 12초 이상 및 풍속 25노트 조건에서는 Surge 운동의 한계값인 3.0미터를 초과하는 것으로 분석되었다. 그 결과를 토대로 계류시스템 제어를 위한 판단기준이 되는 풍속, 파고 및 파주기 등의 주요 외력조건별 고위험, 위험 및 보통 위험 등 3단계의 리스크 매트릭스(Risk Matrix)를 작성하여, 계류시스템 제어를 위한 판단기준이 되는 위기관리 대응매뉴얼로 활용할 수 있을 것으로 기대된다.

GEOTECHNICAL DESIGNS OF THE SHIP IMPACT PROTECTION SYSTEM FOR INCHEON BRIDGE

  • Choi, Sung-Min;Oh, Seung-Tak;Park, Sang-Il;Kim, Sung-Hwan
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회 3차
    • /
    • pp.72-77
    • /
    • 2010
  • The Incheon Bridge, which was opened to the traffic in October 2009, is an 18.4 km long sea-crossing bridge connecting the Incheon International Airport with the expressway networks around the Seoul metropolitan area by way of Songdo District of Incheon City. This bridge is an integration of several special featured bridges and the major part of the bridge consists of cable-stayed spans. This marine cable-stayed bridge has a main span of 800 m wide to cross the vessel navigation channel in and out of the Incheon Port. In waterways where ship collision is anticipated, bridges shall be designed to resist ship impact forces, and/or, adequately protected by ship impact protection (SIP) systems. For the Incheon Bridge, large diameter circular dolphins as SIP were made at 44 locations of the both side of the main span around the piers of the cable-stayed bridge span. This world's largest dolphin-type SIP system protects the bridge against the collision with 100,000 DWT tanker navigating the channel with speed of 10 knots. Diameter of the dolphin is up to 25 m. Vessel collision risk was assessed by probability based analysis with AASHTO Method-II. The annual frequency of bridge collapse through the risk analysis for 71,370 cases of the impact scenario was less than $0.5{\times}10^{-4}$ and satisfies design requirements. The dolphin is the circular sheet pile structure filled with crushed rock and closed at the top with a robust concrete cap. The structural design was performed with numerical analyses of which constitutional model was verified by the physical model experiment using the geo-centrifugal testing equipment. 3D non-linear finite element models were used to analyze the structural response and energy-dissipating capability of dolphins which were deeply embedded in the seabed. The dolphin structure secures external stability and internal stability for ordinary loads such as wave and current pressure. Considering failure mechanism, stability assessment was performed for the strength limit state and service limit state of the dolphins. The friction angle of the crushed stone as a filling material was reduced to $38^{\circ}$ considering the possibility of contracting behavior as the impact.

  • PDF

부산신항역 파랑반응에 따른 부두 가동율 해석 (Analysis of Berth Operation Ratio in terms of Wave Response at Busan New Port Site)

  • 정재현;이학승;이중우;양상용;정영환
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
    • /
    • pp.57-62
    • /
    • 2006
  • 동북아의 허브항만으로 건설중인 부산신항만은 태풍 매미로 인해 480억원에 이르는 큰 피해를 입었다. 국내의 현행 항만설계기준을 보면 항만 정온도 기준은 선박규모별 항내 한계파고만이 규정되어있다. 그러나, 항만의 연중 이용일수를 나타내는 항만 가동률은 화물을 싣고 내리는 하역작업의 효율에 달려있으며, 하역효율은 다시 접안선박의 파랑에 의한 동요 및 하역기계의 성능에 따라 결정된다. 선박의 동요는 파고뿐만 아니라 주기에 따라서도 충분히 달라질 수 있으며 해 ${\cdot}$ 조류, 바람 등의 외력조건, 계류시스템의 특성과 선박의 제원 등의 복합적인 요인에 의하여 결정된다. 본 연구에서는 수치실험 및 관측 자료를 통해 평상시의 항만 가동률을 산정하고자 한다. 특히, 부산신항만의 개발초기단계에서의 계획으로부터 수심을 증심시킴과 아울러, 매립범위 및 해안선 형태 등 다양한 변화가 건설과정에서 나타났고 이를 본 연구에서 반영하여 상세해역과 장래 개발해역 둥에서 항만가동율을 재산정하였다. 파랑변형과정의 이해와 분석을 돕기 위하여 관련해역에서 정상상태 스펙트럼모델과 확장 완경사 파랑 모델을 부산신항역에 적용하여 항만반응 특성을 분석하였다.

  • PDF

olaFLOW를 활용한 투과성잠제에 의한 3차원적 파-흐름의 수치시뮬레이션 (Numerical Simulation of Three-Dimensional Wave-Current Interactions Due to Permeable Submerged Breakwaters by Using olaFLOW)

  • 이광호;배주현;안성욱;김도삼
    • 한국해안·해양공학회논문집
    • /
    • 제30권4호
    • /
    • pp.166-179
    • /
    • 2018
  • 본 연구는 파-흐름의 공존장에 설치된 3차원투과성잠제에 관해 흐름방향에 따라 변화되는 잠제 주변에서 파고분포와 같은 수면변동의 특성 및 설상사주의 주요외력으로 작용하는 평균유속, 연안류 및 난류운동에너지 등을 포함한 유속장의 특성을 수치적으로 검토하였다. 수치해석에는 오픈소스 CFD 코드인 olaFlow를 적용하였으며, 대상파랑은 규칙파와 불규칙파로 하였다. 수치해석결과로부터 흐름방향(순방향과 역방향)에 따른 잠제 제간부 배후에서 파고변화는 난류운동에너지와 밀접한 관계를 가지며, 흐름이 존재하는 경우는 흐름이 없는 경우보다 약한 연안류가 형성됨과 동시에 수송유량이 감소되는 것을 확인할 수 있었다. 이로부터 흐름의 유무 및 방향이 잠제 배후에 형성되는 설상사주의 형성과정에 미치는 영향을 파악할 수 있었다.

내리막 보행시 발 전족부 부착형 아웃솔의 각도 변화가 척추기립근과 하지근의 근활성도에 미치는 영향 (The Influence of Angle Change of the Forefoot's Adhesive Outsole Designs on the Electromyographic Activity of the Erector Spinae and Selected Lower Limb Muscles during Downhill Walking)

  • 이행섭;채원식;정재후;김동수;임영태;장재익
    • 한국운동역학회지
    • /
    • 제24권2호
    • /
    • pp.139-149
    • /
    • 2014
  • The purpose of this study was to evaluate the effect of angle change of forefoot's adhesive outsole on the electromyographic activity (EMG) of the erector spinae and selected lower limbs muscle during downhill walking over $-20^{\circ}$ ramp. Thirteen male university students (age: $25.4{\pm}3.9$ yrs, height: $176.2{\pm}5.1$ cm, weight: $717.4{\pm}105.0$ N) who have no musculoskeletal disorder were recruited as the subjects. To assess the myoelectric activities of selected muscles, six of surface EMG electrodes with on-site pre-amplification circuitry were attached to erector spinae (ES), rectus femoris (RF), biceps femoris (BF), tibialis anterior (TA), lateral gastrocnemius (LG), and medial gastrocnemius (MG). To obtain maximum EMG levels of the selected muscles for normalization, five maximum effort isometric contraction were performed before the experimental trials. Each subject walked over $0^{\circ}$ and $20^{\circ}$ ramp with three different forefeet's EVA outsole (0, 10, $20^{\circ}$) in random order at a speed of $1.2{\pm}0.1$ m/s. For each trial being analyzed, five critical instants and four phases were identified from the recording. The results of this study showed that the average muscle activities of MG and LG decreased in $20^{\circ}$ shoes compared to $0^{\circ}$ and $10^{\circ}$ ones in the initial double limb stance (IDLS). In initial single limb stance (ISLS) phase, the average muscle activities of ES increased with the angle of forefoot's adhesive outsole, indicating that the increment of shoes' angle induce upper body to flex anteriorly in order to maintain balance of trunk. In terminal double limb stance (TDLS) phase, average muscle activities of TA significantly increased in $20^{\circ}$ outsole compared to $0^{\circ}$ and $10^{\circ}$ ones. There was no external forces acting on the right foot other than the gravity during terminal single limb stance (TSLS) phase, all muscles maintained moderate levels of activity.

차량용 전자식 웨이스트 게이트 터보차져의 밸브 떨림음에 대한 실험적 고찰 (Experimental investigation on valve rattle noise of automotive electronic-wastegate turbochargers)

  • 박호일;엄상봉;김영강;황준영
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2013년도 추계학술대회 논문집
    • /
    • pp.686-686
    • /
    • 2013
  • 차량용 터보차져는 디젤엔진뿐만이 아니라 가솔린 엔진에서도 장착이 보편화 되었다. 터보차져는 엔진의 효율과 출력을 효과적으로 증가시키는데 매우 훌륭한 장치이기는 하나, 여러 가지의 소음 문제를 유발시키기도 한다. 이들 소음은 회전축의 거동에 의하여 유발되는 구조 전달 소음과 공기 유동에 의하여 유도되는 공력 소음으로 구분된다. 이와 더불어 웨이스트게이트 밸브를 전자적으로 제어하는 액츄에이터계 거동으로부터 발생되는 기계적 소음이 있는데, 이것이 밸브 떨림음이다. 이 소음은 밸브가 열려 있을 때에만 발생하는데, 이는 연결 구조물 사이의 간극이 외력에 의하여 강제 접촉을 유지하지 않고 밸브부터 액츄에이터 사이에 연결되어 있는 각 연결 구조물이 서로 자유단으로 접촉하고 있기 때문이다. 각 자유단 접촉점에서는 배기가스 맥동파에 의하여 충격 진동이 발생하고 이것이 터빈하우징으로 전달되어 밸브 떨림음이 발생하는 것이다. 그러나, 액츄에이터의 기계적 구동력에 의하여 액츄에이터의 모든 연결 구조물이 강제접촉을 유지하고 있는 기계식 액츄에이터에서는 발생하지 않는다. 본 논문에서는 불평형 회전축을 갖는 소형 진동 모터를 이용하여 전자식 액츄에이터에서 발생하는 밸브 떨림음 평가를 위한 장치를 고안하였으며, 이 장치를 이용하여 밸브 떨림음의 저감효과를 평가하였다. 소음 저감 방법으로는 구조물간 접촉 간극 축소 또는 웨이브 와셔 삽입, 밸브레버와 터빈하우징 사이에 조립되는 부싱의 헐거움 끼움이 효과적임을 확인하였다.

  • PDF

선망어업의 생산성 향상에 관한 연구-III - 죔줄 체결시 파워불록과 트리플랙스용 선망 모형의 유속에 따른 운동특성 - (Studies on the improvement of the productivity of purse seine fishery-III - The characteristics on the motion with the flow velocity of model purse seine of the subjective power block and triplex during pursing -)

  • 김석종
    • 수산해양기술연구
    • /
    • 제43권1호
    • /
    • pp.12-27
    • /
    • 2007
  • This fundamental studies on for the productivity improvement and laborsaving of purse seine fishery. Given the difficulty posed from the distortion of net shape caused by the external forces, such as tide, at the time of shooting and pursing, we set the 4 steps of 0, 2, 4 and 6cm/sec in flow velocity in the flume tank for the experiment in order to examine those characteristics. We used two model seines designed on the scale of 1 to 180 based on the power block seine, which is the mackerel purse seine generally used in the near sea of Jeju Island and triplex seine, which is the mackerel purse seine of one boat system fishing expected in the future, for the experiment, and interpreted the characteristics of several motion in water, such as the shape of seine, the change in tension and area during pursing and its the analysis results are as follows. Though the experiment could be conducted up to 6cm/sec of flow velocity that was defined, the experiment could not go on because of the severe distortion in the seine at the flow velocity in excess of 6cm/sec. As for the depth of leadline and reduction rate of side area of seine when the pursing is connected, P seine turned out to be slightly higher than T seine, and the hauling speed and reduction rate of upper area of seine were found similar to each other. The correlation between the hauling time (Ht) and depth of lead line (Dhp, Dht) of P seine and T seine can be expressed by the equation, that is, Dhp=(0.99Pt-7.63)Pt+69.01, Dht=(1.03Pt-7.73)Pt+66.74. The correlation between the hauling time and hauling velocity (Hpp, Hpt) can be expressed by the equation, that is, $Hpp=-0.06Ht^2+0.88Ht+0.78,\;Hpt=-0.05Ht^2+0.81Ht+0.98$ here, Pt is pursing time. And the correlation between the pursing time and the reduction rate of side area (sArp, sArt) can be expressed by the equation, that is, $sArp=-0.48Pt^2+14.79Pt-16.74,\;sArt=-0.45Pt^2+14.56Pt-16.48$. The reduction rate of upper area of seine (tArp, tArt) can be expressed by the equation, that is, $tArp=0.34Pt^2-0.66Pt-0.74,\;tArt=0.34Pt^2-0.27Pt-1.80$. In addition, the correlation between the pursing time and tension of purse line (Tep, Tet) can be expressed by the equation, that is, $Tep=2.79Pt^2+2.26Pt-0.60,\;Tet=2.14Pt^2+8.08Pt-27.50$.