• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.35-45
• /
• 2014

Confocal Reflection Microscopy (CRM) was applied to investigate external fibrillation of different types of fibers such as Kajaani reference fiber, Whatman filter fiber, thermomechanical pulp (TMP), and recycled TMP fiber. It was confirmed that the CRM images are created from surface structures of the fiber cell wall. Confocal Laser Scanning Microscopy (CLSM) captured overall shape of the fiber, but minute details of the surface of the fiber were missed. CRM captured the minute details of the fiber surface. From the CRM and CLSM images, it was observed that the CRM images mainly appeared on the fiber surfaces. External fibrillation of the fiber occurs at the fiber surface, not inside the cell wall. Thus, it was concluded that investigation on the external fibrillation of the fiber was possible by utilizing CRM images. A direct qualtitative and quantitative method for analysis of external fibrillation of fiber was demonstrated by utilizing surface area to volume ratio, volume fraction, and roughness calculated from 3-dimensional images reconstructed from stacks of CRM images from the different fibers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.1 s.119
• /
• pp.1-7
• /
• 2007

Internal fibrillation of pulp fiber is an important factor affecting paper properties. Internal fibrillation of pulp fiber is usually introduced with several kinds of modifications of fiber by the mechanical treatment such as refining, high shear and/or high consistency mixing, etc. Unfortunately there are no standardized methods that can characterize the extent of internal fibrillation and its contribution on the paper properties. The purpose of this study is to try and find the potential methods that can characterize the internal fibrillation of pulp fiber quantitatively. Softwood bleached kraft pulp was treated with Hobart mixer to introduce the internal fibrillation without the significant fiber damage and external fibrillation. The extent of internal fibrillation was increased with the increase of mechanical treatment consistency. Several fiber properties were measured to find the potential means that could characterize and quantity the internal fibrillation. Laminated area could not be used as a means for quantifying the internal fibrillation because of the effect of swelling and the different internal fibrillation behavior at different mechanical treatment consistency. Micro and macro internal fibrillation models were proposed for describing the different behavior for the mechanical treatment at low and high consistencies of pulp. The Internal fibrillation showed good correlation with swelling of fiber wall. This trend was confirmed through the measurement of wall thickness and/or cross section area of fiber. Therefore the internal fibrillation possibly can be described as the indices indicating the change of wall thickness and/or cross section area.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.3
• /
• pp.60-67
• /
• 1999

The CLSM and the image analysis technique enhanced observation of fiber wall fibrillation occurred in both the outer and the fiber wall surfaces during refining by non-destructive techniques. In the early stages of refining, it was well observed that a partial separation between the S1 and S2 layer in the secondary wall was made generating a space in the wet fiber walls . With further refining, it was clearly shown that the shear forces imparted by the refiner bar surfaces caused the S1 layer to become totally separated from the S2 layer as well as creating microfibrils. Furthermore, the fibrillation in the inner fiber wall surfaces could be due to the normal force (Fn) by refiner bars, friction force between a fiber and refiner bars (Fs) and inner friction force between fiber walls(fs). It was confirmed that the concept of fibrillation should be extended to fibrillation in the inner fiber wall surfaces as well as internal and external fribrillation.

• Journal of Biomedical Engineering Research
• /
• v.25 no.2
• /
• pp.119-127
• /
• 2004

In this paper, an automatic external biphasic defibrillator that removes ventricular fibrillation efficiently with a low discharging energy has been developed. The system is composed of software including a fibrillation detection algorithm and a system control algorithm, and hardware including a high voltage charging/discharging part and a signal processing part. The stability of the developed system has been confirmed through continuous charging/discharging test of 160 times and the detection capability of the real-time fibrillation detection algorithm has been estimated by applying a total of 30 various fibrillation signals. In order to verify the clinical efficiency and safety, the system has been applied to five pigs before and after fibrillation inductions. Also, we have investigated the system efficiency in removing fibrillation by applying two different discharging waveforms, which have the same energy but different voltage levels.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.183-199
• /
• 2001

Alternative way of shaping fibers suitable for papermaking was introduced. Impact refining, which was done simply by hitting wet fibers with a metal weight vertically, was intended to keep the fibers from shortening and to cause mostly internal fibrillation. Virgin chemical pulp, its recycled one and OCC were used in the experiment. It was noticed from the experiment that impact refining on virgin chemical pulp kept the fiber length and Increased bonding properties greatly, However, in the recycled fibers from the chemical pulp, fiber length and bonding properties were decreased. In OCC, which seems to contain fractions of semi-chemical pulp and mechanical pulp (GP), and which is recycled pulp from corrugated boxes, fiber length and bonding properties were decreased disastrously. We believe recycled cellulosic fibers (recycled chemical pulp and OCC in this case), which went through hornification, were less resistant to the mechanical impact than virgin chemical pulp. For virgin chemical pulp, impact refining allowed no significant fiber length shortening, high WRV, and high mechanical strength.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.1
• /
• pp.39-45
• /
• 1999

Refining in papermaking plays an important role in changing fiber properties as well as paper properties. The major effects of refining on pulp fibers are internal and external fibrillation, fiber shortening, and fines formation. Many workers showed that internal fibrillation of the primary refining effects was most influential in improving paper properties. In particular, refining produces separation of fiber walls into several lamellae, thus causing fiber wall swelling with water penetration. This leads to the increase of fiber flexibility and of fiber-to-fiber contact during drying. If the fibers are very flexible, they will be drawn into close contact with each other by the force of surface tension as the water is removed during the drainage process and drying stages. In order to study the effect of fiber wall delamination on paper properties, cross-sectional image of fibers in a natural condition had to be generated without distortion. Finally, it was well recognized that confocal laser scanning microscope (CLSM) could be one of the most efficient tool for creating and quantifying fiber wall delamination in combination with image analysis technique. In this study, the CLSM could be used not only to observe morphological features of transverse views of swollen fibers refined under low and high intensity, but also to investigate the sequence of fiber wall delamination and fiber wall breakage. From the CLSM images, increasing the specific energy or refining decreased the degree of fiber collapse, fiber cross-sectional area, fiber wall thickness and lumen area. High intensity refining produced more external fibrillation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.5
• /
• pp.56-62
• /
• 2002

Alternative way of shaping fibers suitable for papermaking was introduced. Impact refining, which was done simply by hitting wet fibers with a metal weight vertically, was intended to keep the fibers from shortening and to cause mostly internal fibrillation. Virgin chemical pulp, its recycled one and OCC were used in the experiment. It was noticed from the experiment that impact refining on virgin chemical pulp kept the fiber length and increased bonding properties greatly. However, in the recycled fibers from the chemical pulp, fiber length and bonding properties were decreased. In OCC, which seems to contain fractions of semi-chemical pulp and mechanical pulp (GP), and which is recycled pulp from corrugated boxes, fiber length and bonding properties were decreased disastrously. We believe recycled cellulosic fibers (recycled chemical pulp and OCC in this case), which went through hornification, were less resistant to the mechanical impact than virgin chemical pulp. For virgin chemical pulp, impact refining allowed no significant fiber length shortening, high WRV, and high mechanical strength.

• Journal of Biomedical Engineering Research
• /
• v.20 no.6
• /
• pp.561-571
• /
• 1999

심실세동은 환자의 생명을 위협하는 가장 치명적인 부정맥으로서, 심실세동의 발견즉시 특별한 조치를 취하지 못할 경우 환자는 급사한다. 심실세동을 정지시키는 유일한 방법은 전기적 제세동이며 이는 환자의 심장 부위에 전기적 에너지를 가해 정상 심장 리듬을 되찾도록 하는 방법이다. 심실세동의 발생은 예측할 수 없고, 이를 진단하기 위한 심전도 교육을 모든 의료인에게 할 수 없으므로 심전도를 자동 분석하여 심실세동을 조기에 검출하는 자동 분석장치의 개발은 심실세동에 의한 급사를 줄이는데 매우 중요하다. 본 연구에서는 교차간섭성분의 제거 능력이 뛰어나며 쉽게 구사할 수 있는 Choi-Williams distriguteion (CWD) 방법을 이용하여 급사를 초래할 수 있는 심실세동을 자동 검출하는 알고리즘을 개발하였다. 그리고 개발된 알고리즘의 성능을 검증하기 위하여 본 논문에서는 두 그룹의 심실세동 데이터를 사용하였다. 검출 알고리즘은 심실세동의 시간 및 주파수 특성을 일곱가지 조건들에 대한 만족 여부를 이용하여 심실세동을 판정하였고, 실험의 민감도와 선택도는 각각 92.1%, 97 .2% 이다.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.581-590
• /
• 2020

Pulp refining is the major way to alter the properties of fibers and formed paper. Different combinations of the bar profile of the rotor and stator during low consistency refining processes directly affect the properties of the paper. In this study, a mixture of softwood and hardwood pulp was refined by varying the bar angle of the stator while that of the rotor is fixed at 0º. The pulp samples were collected at different refining times. Then, the pulp and paper properties, such as beating degree, fiber external fibrillation, and tensile and tear indexes were measured to explore the effects of the combined refining plates at different bar angles on paper properties. The results of the experiment show that the combined refining plate of 0º and 5º recorded the most significant improvement in the pulp beating degree and fiber external fibrillation. This consequently increased the fiber bonding area, which in turn, improved both the tensile and the tear indexes of the paper. Also, the influence of the combined refining plates with a larger bar angle on the paper properties was weaker compared to that of smaller angles. This study not only provides ideas for the bar profile design but also improves the optimal selection of refining plates.

• The Korean Journal of Pharmacology
• /
• v.19 no.1
• /
• pp.61-69
• /
• 1983

Hypothermia is an essential preparatory procedure for cardiac surgery, which lows the metabolic rate and myocardial oxygen demand. However, hypothermia itself is a stress enough to change the tonus of sympathoadrenal system, especially the cardiovascular responses to the catecholamines. It is reported that the positive chronotropic and inotropic response of catecholamines is exaggerated during hypothermia because of decreased norepinephrine uptake at the junctional cleft or decreased catecholamine metabolism. On the other hand, there are evidences of diminished catecholamines responses in low temperature ana further, interconversion of adrenergic receptors is also suggested. Present investigation was planned to observe the cardiovascular changes and its responses to catecholamines during surface hypothermia in cat. Healthy mongrel cats, weighing $2{\sim}3\;kg$, anesthetized with secobarbital(30 mg/kg), were permitted to hypothermia by external cooling technic. Esophageal temperature, ECG (lead II), heart rate, left ventricular pressure with dP/dt, carotid artery pressure and left ventricular contractile force were monitored with Polygragh (Model 7, Grass), and the respiration was maintained with artificial respirator (V 5 KG, Narco). Followings are summarized results. 1) Surface cooling caused progressive decrease of body temperature and reached $l8.8{\pm}0.8^{\circ}C$ and $16.9{\pm}0.6^{\circ}C$ in 120 and 150 min respectively, after immersion into ice water, and ventricular fibrillation was developed at $20.4{\pm}0.65^{\circ}C$. 2) Heart rate, blood pressure and myocardial contractility were decreased after initial increase as the body temperature falls. 3) Systolic and diastolicdd P/dt of left ventricular pressure were decreased and that the decrement of diastolic dP/dt was more marked. 4) On ECG, ST depression, Twave inversion and prolongation of PR interval were prominent in hypothermia, and moreover, the prolongation of PR interval was marked just prior to the development of ventricular fibrillation. 5) The cardiovascular responses to catecholamines, especially to isoproterenol, were suppressed under hypothermia.