• 제목/요약/키워드: external electrode

검색결과 264건 처리시간 0.023초

다중방전형 오존발생기의 試作 및 特性(I) (Trial Manufacture and Characteristics of a Multi-discharge Type ozonizer(I))

  • 송현직;이광식;박원주;이동헌;김금영;김이국
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제48권7호
    • /
    • pp.533-541
    • /
    • 1999
  • Multi-discharge type ozonizer(MDO) using superposed silent discharge has been designed and manufactured. It consists of three electrodes( central electrode, internal electrode, and external electrode ) and double gaps( gap between central electrode and internal electrode, gap between internal electrode and external electrode ). Therefore, ozone is generated by superposing silent discharges generated between the gaps respectively. And the MDO consists of three types of superposed discharge ozonizers according to voltage appling method for each electrode ; A.C. high voltages are applied two of three electrodes with phase difference of 180[˚], the other electrode is a ground. This paper describes that discharge and ozone generation characteristics of MDO which comprising central electrode and internal electrode applied A.C. high voltages with phase difference of 180[˚] respectively, and the grounded external electrode. As a result, the maximum ozone concentration, generation, and yield can be obtained 10208[ppm], 6.4[g/h], and 280[g/kwh] respectively.

  • PDF

진공 방전관을 이용한 고농도 중첩방전형 오존발생기의 특성 (The Characteristics of a Superposed Discharge Type Ozonizer Using Vacuum Discharge Tube)

  • 송현직;이창호
    • 조명전기설비학회논문지
    • /
    • 제19권5호
    • /
    • pp.60-67
    • /
    • 2005
  • 본 논문에서는 진공방전관을 이용한 고농도 중첩방전형 오존발생기를 설계$\cdot$제작하였다. 3개의 전극(중심전극, 내부전극 및 외부전극)과 1개의 방전간극(내부전극과 외부전극 사이의 방전간극)으로 구성된 중첩방전형 오존발생기는 진공방전관내에 장착한 중심전극과 내부전극에 $180{[^\circ]}$의 위상차를 가진 2개의 교류고전압을 인가하고 외부전극을 공통접지함으로써 중심전극과 외부전극사이에서 발생되는 무성방전과 내부전극과 외부전극사이에서 발생되는 무성방전이 방전간극에서 중첩되는 구조이다. 이때 방전관의 진공도, 방전전력 및 산소원료가스 유량 변화에 따른 방전특성과 오존생성특성을 연구검토한 결과 최대 8840[ppm]의 고농도 오존을 얻을 수 있었다.

디지털용 외부 전극층 재료를 이용한 형광램프의 특성비교 (Characteristics Comparison of Fluorescent Lamp with External Electrode Materials for Digital)

  • 김수용
    • 한국정보통신학회논문지
    • /
    • 제11권3호
    • /
    • pp.549-554
    • /
    • 2007
  • 본 논문에서는 다양한 전극재료로부터 빛의 밝기와 저항을 측정분석 하였다. 외부전극의 새로운 재료와 공정기술은 램프제작에서 개선된 특성을 위해서 매우 중요하다. 본 실험에서는 외부 전극을 형성하기 위한 다른 세가지 타입은 구리와 알루미늄 테이핑, 은 접착, 니켈과 구리의 무전해 도금 방법들이다. 밝기측정에서 램프유리위에 외부 전극을 위한 니켈과 금 플레이팅 방법에 의한 휘도의 결과를 나타내었고, 또한 다른 전극재료를 사용한 방법에 의한 결과를 비교 하였다. 니켈과 금플레이팅 공정의 측정된 저항값은 휘도의 개선된 결과에도 불구하고 다소 높은 저항값을 나타내었다. 니켈과 니켈/금 도금방법은 가장 좋은 결과를 나타내었고, 사전 표면 식각에 따라 약간의 다른 휘도를 나타내었다.

Effects of External Current Constraint on the Belousov-Zhabotinskii System Measured by a Pt Electrode

  • Wei, Guoying;Jin, Yongdong;Ge, Hongliang;Luo, Jiuli
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권4호
    • /
    • pp.543-547
    • /
    • 2005
  • The Belousov-Zhabotinskii system measured by a Pt electrode is investigated under external electrode current constraint. A dynamical analysis of the electrode reaction phase has been made by means of a linearized stability criterion valid for three-variable system. It turns out that limit cycle oscillatory regime and dynamical behaviors of the electrode reaction phase have been degenerated under periodical electrode current.

여러 가지 외부 전극층 재료를 사용한 형광램프의 전기적 및 광학적 특성에 관한 연구 (A Study on electrical and optical characteristics of single EEFL using different electrode materials)

  • 김수용;지석근;이오걸
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2006년도 춘계종합학술대회
    • /
    • pp.878-881
    • /
    • 2006
  • 본 논문에서는 다양한 전극재료로부터 빛의 밝기와 저항을 측정하였고 분석하였다. 외부전극의 새로운 재료와 공정기술은 램프제작에서 개선된 특성을 위해서 매우 중요하다. 본 실험에서는 외부전극을 형성하기 위한 다른 세가지 타입은 구리와 알루미늄 테이핑, 은 접착, 니켈과 구리의 무전해 도금 방법들이다. 밝기측정에서 램프유리위에 외부전극을 위한 니켈과 금플레이팅 방법에 의한 휘도의 결과를 나타내었고 또한 다른 전극재료를 사용한 방법에 의한 결과들과 비교하였다. 니켈과 금플레이팅 공정의 측정된 저항값은 휘도의 개선된 결과에도 불구하고 다소 더 높은 저항값을 나타내었다. 그러나 니켈과 니켈/금 도금방법은 가장 좋은 결과를 나타내었고 사전 표면 식각에 따른 약간의 다른 휘도를 나타내었다.

  • PDF

3상전압을 이용한 중첩방전형 오존발생기의 특성 (The Characteristics of Superposed Ozonizer using Three-Phase Voltage)

  • 김영훈;전병준;송현직;윤영대;이광식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 E
    • /
    • pp.2259-2261
    • /
    • 1999
  • In this paper, an ozonizer, which can generate individual and superposed silent discharge, using three-phase voltage has been designed and manufactured. The ozonizer consists of 3 electrodes(Central Electrode, Internal Electrode and External Electrode) and 2 gaps(gap between Central Electrode and Internal Electrode, gap between Internal Electrode and External Electrode). Ozone is generated according to voltage supplying method to each electrode by individual silent discharge and three-phase superposed discharge. The characteristics of ozone generation were investigated with variation of discharge power and the quantity of supplied gas($O_2$). In case of individual silent discharge, the maximum values of ozone concentration, ozone generation and ozone yield were obtained between internal electrode and external electrode, and its values were 2300[ppm], 570[mg/h] and 745[g/kWh] respectively. Each maximum values was 5039[ppm], 1773[mg/h] and 851[g/kWh] respectively, when three-phase superposed silent discharge was employed. Therefore, characteristics of ozone generation with three-phase voltage are improved compared with single-phase voltage because silent discharge is generated continuously.

  • PDF

3상 전압을 사용한 중첩방전형 오존발생기의 오존생성 및 방전잡음특성 (The Ozone Generation and Discharge Noise Characteristics of Superposed Discharge Noise Characteristics of Superposed Discharge Type Ozonizer Using Three-Phase Voltage)

  • 전병준;송현직;김영훈;최상태;이광식
    • 조명전기설비학회논문지
    • /
    • 제14권2호
    • /
    • pp.59-67
    • /
    • 2000
  • 본 논문에서는 단목무성방전과 3상 전압을 사용한 중첩무성방전을 인가할 수 있는 오존발생기를 설계.제작하였다. 오존발생기는 3개의 전극(중심천극, 내부천극 및 외부전극)과 2개의 방전갭(중심전극과 내부전극 사이의 갭 및 내부전극과 외부전극 사이의 갭)으로 구성되어 있으며, 단목무성방전과 3상 중접방전이 인가되는 방식에 따라 오존화 가스가 생성된다. 이때 방전전력과 원료가스($O_2$)의 유량의 변화에 따른 오존생성특성을 연구한 결과, 단독무성방전의 경우, 최대 2300[ppm], 570[mg/h] 및 745[g/kWh]의 오존생성특성을 얻을 수 있었으며,3상 전압을 인가한 경우에는 5039[ppm], 1773[mg/h] 및 851[g/kWh]을 각각 얻을 수 있었다. 따라서 3상 중첩무성방전 이 단독무성방전에 비하여 오존생성특성올 향상시킬 수 있음을 확인하였다.

  • PDF

구형파로 구동되는 외관전극 형광램프의 휘도 및 효율 특성 (Characteristics of Luminance and Efficiency for External Electrode Fluorescent Lamps Driven by Square Pulses)

  • 조태승;김영미;권남옥;김성중;강준길;최은하;조광섭
    • 한국진공학회지
    • /
    • 제11권1호
    • /
    • pp.76-80
    • /
    • 2002
  • 외관 전극의 용량성 결합에 의하여 동작되는 형광램프의 특성을 조사하였다. 외관전극 형광램프는 10 mA 이하의 저전류와 약 1.5 kV의 고전압으로 구동된다. 구동 주파수 100 kHz 이하의 구형파 구동에 의하여 효율 40 lm/W의 20,000~30,000 cd/$\textrm m^2$의 고휘도를 실현하였다. 외관전극의 길이가 길수록 휘도와 효율이 증가하지만, 전극 길이가 3 cm 이상에서 그 증가율이 둔화된다.

외부전극 형광램프를 위한 유도-용량형 플라즈마의 휘도특성 (Brightness Property of ICCP(Inductive Capacitive Coupled Plasma) for External Electrode Fluorescent Lamp (EEFL))

  • 이성진;최기승;채수길;박대희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
    • /
    • pp.1657-1658
    • /
    • 2006
  • An external electrode fluorescent lamps (EEFLs) have the advantage of a long lifetime in the early stages of the study on plasma discharge, interest in the lamp continues. Studies on the operation of external electrode fluorescent lamps have focused mainly on its use of a type of high frequency (MHz). By performing high brightness using a square wave operation method with the low frequency below 100kHz, which is applied to a narrowed tube type lamp that has several mm of lamp diameter. To solve these problems of CCFL, EEFL (External Electrode Fluorescent Lamp) is introduced. Because electrode of EEFL is on the outer surface of discharge tube, the electrode is perfectly prevented from the sputtering by accelerated ions. And it is possible to drive the many CCFLs at the same time, because EEFL shows the positively resistant characteristic. But EEFL has the large non-radiative power loss in sheath. In this study the novel electrode structure was introduced in order to reduce non-radiative power loss in sheath of EEFL. The novel electrode structure comes from the idea to combine conceptually capacitive discharge with inductive discharge. Thus, this study verifies the change in the optical characteristics according to the change in electrode structure through a Maxwell's electromagnetic field simulation and examines the relationship between the change in the EEFL electrode structure and brightness by measuring the optical characteristics.

  • PDF

Electrode Formations for the External Electrode Fluorescent Lamps

  • Kim, Young-Mi;Kim, Sung-Jung;Kwon, Nam-Ok;Lee, Yong-Gon;Choi, Eun-Ha;Cho, Guang-Sup;Kim, Bong-Soo;Kang, June-Gill
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.533-535
    • /
    • 2002
  • Electrode formation methods such as a metal-taping, a electrolytic plating, and a metal-paste melt-bonding, are introduced for an external electrode fluorescent lamp. The characteristics of luminance and efficiency for various external electrode types have been investigated.

  • PDF