• Journal of Korea Spatial Information System Society
• /
• v.5 no.2 s.10
• /
• pp.83-89
• /
• 2003

In this study, a new coded targets that being suitable for a Mobile Mapping System and method of automated target recognition and coordinates determination of center point was developed, the purpose of a Mobile Mapping System is acquisition and logging data around the road for the camera calibration and the Exterior orientation of system, target installed previously and CCD cameras captured the image, target center point was observed by hands, but using coded target, target recognition and center point observation process will be automated effectively, in addition we keeped up the consistency of photo coordinates observation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.69-75
• /
• 2019

The cooling performance of heat pump system for light-duty commercial electric vehicle was evaluated experimentally. The cooling performance characteristics of the heat pump for light-duty commercial electric vehicles were evaluated by varying the temperature, flow rate of chiller coolant, and electric compressor speed, under the exterior air temperature of 35 ℃ and interior air temperature of 25 ℃. Increasing the compressor speeds decreased the cooling system efficiency by 16.4 % on average with the cooling capacity increasing by 8.0 % on average and the compressor work increasing by 27% on average. To use waste heat from the coolant to chill power electronic components, such as the motor and inverter, a chiller was installed to transfer heat between the coolant and refrigerant. Increasing the temperature of the chiller coolant from 35 ℃ to 55 ℃ decreased the efficiency by 18.2 % on average due to higher condensing heat source. Increasing the coolant flow rate from 10 liter/min to 20 liter/min did not affect the cooling capacity of the system due to a similar total condensing heat transfer rate at the chiller and the exterior heat exchanger. In future works, heating performance will be investigated by varying the operating conditions to use the chiller's waste heat with an improvement of heating capacity.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.461-471
• /
• 2015

In this study, we generated orthoimages and Digital Elevation Model (DEM) from Unmanned Aerial Vehicle (UAV) to confirm the accuracy of possibility of geospatial information system generation, then compared the DEM with the topographic height values measured from Real Time Kinematic-GPS (RTK-GPS). The DEMs were generated from aerial triangulation method using fixed-wing UAV and rotary-wing UAV, and DEM based on the waterline method also generated. For the accurate generation of mosaic images and DEM, the distorted images occurred by interior and exterior orientation were corrected using camera calibration. In addition, we set up the 30 Ground Control Points (GPCs) in order to correct of the UAVs position error. Therefore, the mosaic images and DEM were obtained with geometric error less than 30 cm. The height of generated DEMs by UAVs were compared with the levelled elevation by RTK-GPS. The value of R-square is closely 1. From this study, we could confirm that accurate DEM of the tidal flat can be generated using UAVs and these detailed spatial information about tidal flat will be widely used for tidal flat management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.9-14
• /
• 2016

This study evaluated a digital locking device design using detection distance of 13.4mm of a human body sensing type magnetic field coil. In contrast to digital locking devices that are used nowadays, the existing serial number entering buttons, lighting, number cover, corresponding pcb, exterior case, and data delivery cables have been deleted and are only composed of control ON/OFF power switches and emergency terminals. When the magnetic field coil substrates installed inside the inner case detects the electric resistance delivered from the opposite side of the 12mm interval exterior contacting the glass body part, the corresponding induced current flows. At this time, the magnetic field coil takes the role as a sensor when coil frequency of the circular coil is transformed. The magnetic coil as a sensor detects a change in the oscillation frequency output before and after the body is detected. This is then amplified to larger than 2,000%, transformed into digital signals, and delivered to exclusive software to compare and search for embedded data. The detection time followed by the touch area of the body standard to a $12.8{\emptyset}$ magnetic field coil was 30% contrast at 0.08sec and 80% contrast at 0.03sec, in which the detection distance was 13.4mm, showing the best level.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.2 s.161
• /
• pp.177-188
• /
• 2007

The purpose of this study was to provide basic materials for the brief patterns and design development for the elderly women to select number 1 to 3 brands according to their brand preference surveying the elderly women with average shapes, and to compare and analyze the exterior fit and functionality. Accordingly, this study proposed basic materials needed for panty pattern suitable for average shapes of the elderly women. The results of the study are as follows: 1 . Looking into the style, they preferred white the best. Regarding the patterns, almost half preferred patterns and rest of them did not. With the panty with patterns, they wanted small and implicit flower patterns. The design they liked was midi, maxi and then mini in order. When looking into the brands, they preferred 'Company B', 'Company SS', 'Company SY', and then market products. The reason why they selected those panty was feeling of fitness, price and then material. 2. To classify the figures of elderly women, we grouped the subjects with strata method using minimal dispersion method. Type 1 is the average, type 2 is for obese women and type 3 is slender women. 3. 3 brands were selected that were produced using CM 40's and elderly women preferred best. When executing wearing test on two elderly women who have average figure according to the body measures in previous study and body measure of Size Korea total exterior evaluation score was Company A, B and C in order.

• Herbal Formula Science
• /
• v.21 no.1
• /
• pp.142-153
• /
• 2013

Objectives : Examined the editing system and the characteristics of "Clinical Formula Science of Korean Medicine" to establish a basis for compilation system of the common formula science textbook for colleges of Korean medicine nationwide. Methods : Comprehended the "Clinical Formula Science of Korean Medicine" published by professor Hyeongok(1911-1987) in 1985 and analyzed its configuration system. Results : "Clinical Formula Science of Korean Medicine" has made it possible to understand the formula systematically by establishing and classifying 24 kinds of treatment method [the three treatment methods of cold-dampness, dryness-heat and interior deficiency and its subdivision, 19 kinds of treatment method (stomach, phlegm, eum, yang, spirit, essence, ki, blood, blood stasis, exterior, interior, half-exterior half-interior, water, wind, cold, heat, dampness) combined with reducing and vomiting] and main formula. These can be considered as professor Hyeongok's own method of classification, which is distinctive from the existing formula science system. Also, it suggests that a Korean medicine doctor should not use a biased formula science that is limited to some schools but apply the formula widely and synthetically because it is believed to pursue perfection in cure if the main formulas related to a physical disorder, pregnancy and childbirth, invigorating and purging five viscera, and Four-Constitution Medicine are added. Conclusions : "Clinical Formula Science of Korean Medicine" is seen as a formula science book which is to be consulted when compiling a common formula science textbook for colleges of Korean medicine by forming a Korean formula science system that is distinctive from that of China.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.143-151
• /
• 2015

The Crack, occurred in the concrete structure, is a major cause of function deterioration such as strength, durability and waterproof. Therefore the need for crack reduction will continue as long as there is concrete structure. But, it is not easy to reduce or prevent crack cause of impact factor of it. There are so many factors of crack such as material, construction and maintenance environment, and structure, and these are acting in combination. So, this study derives a correlation between the cracks and members through reviewing member crack occurred. And member's attribute, related crack, is analyzed by it. It consider that the basic attribute of member is similar when its requirements are similar. Through this study, therefore, foundation of countermeasure of crack will be provided by prediction of crack shape through member's attribute.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.3
• /
• pp.82-91
• /
• 1996

This is a basic study for the static and dynamic analysis on the elasto-plastic and elasto-viscoplastic of an axi-symmetric shell. The objective of this study was to investigate the mechanical characteristics of a nuclear reinforced concrete containment structure, which was selected as a model, by a numerical analysis using a finite element method. The structure was modeled with discrete ring elements of 8-noded isoparametric element rotating against the symmetrical axis, and the interaction between the foundation and the structure was modeled by Winkler's model. Also, the meridional tendon was modeled with 2-node truss elements, and the hoop tendon was done with point elements in two degrees of freedom. The effect of the tendon was considered without the increasement in total degree of freedom as the stiffness matrix of modeled tendon elements was assembled on the stiffness matrix of ring elements linked with the tendon. The results obtained from the analysis of an example were summarized as follows : 1. The stresses in the hoop direction on the interior and exterior surfaces of the structure were shown in changes of similar trend, and high stresses appeared on the structure wall 2. The stresses in the meridional direction on the interior and exterior surfaces were shown in change of different trend. Especially, the stresses at the junctions between the dome and the wall and between the wall and the bottom plate of the structure were very high, compared with those at other parts of the structure. 3. The stress changes in the direction of thickness on the crown of the dome were much linearly distributed. However, as the amount of tendon increased, the stresses in the upper and lower parts of the wall established with the tendon were shown stress concentration. 4. The stress changes in the direction of thickness on the center of the structure wall was linearly distributed in the all cases, and special stress due to the use of the tendon was not shown.

• Journal of People, Plants, and Environment
• /
• v.23 no.1
• /
• pp.101-114
• /
• 2020

This study focused on the composition of the exterior space of Parkjinsagoga, the types of gardens and planting and the landscape characteristics of walls, and examined its meaning as modern garden remains. Parkjinsagoga is a modern Korean house that harmonizes traditionality and practicality, and is an invaluable material for research not only on architecture but also on changes in the gardens of upper-class gardens. Its exterior space can be divided largely into An-chae (inner house), Outer Sarang-chae (outer house) and Inner Sarang-chae areas, and a garden was created in each yard (inner garden). In particular, one thing noticeable is that the yard of Inner Sarang-chae, unlike traditional gardening styles, was actively decorated. At the center of the yard of Inner Sarang-chae, two atypical planters and artificial moundings were created and the traffic line of the garden was designed to enjoy them while walking. An atypical pond was created on one of the artificial moundings and trees and shrubs were densely planted. Natural stones were also placed. The style seemed to be affected by Japanese gardens. These characteristics observed in the gardens of Parkjinsagoga are closely related to the transitional characteristics that traditional gardens started to show in modern times. A total of 35 families and 57 species were planted in the gardens of Parkjinsagoga and there were 19 species of tall trees, 20 species of shrubs and 17 species of flowering plants. The number of species planted in the garden of Inner Sarang-chae was the highest, and a total of 22 species of tall trees and shrubs. The walls in Parkjinsagoga were basically earth and rock-fill walls but their materials and patterns differed depending on the type of spaces. Four types of walls were found to be introduced to the house.

• Journal of Korean Medical classics
• /
• v.36 no.4
• /
• pp.1-24
• /
• 2023

Objectives : To understand the theoretical principle of the pulse patterns listed in the 27 Pulses chapter in the Donguibogam, to further examine the relationship between the pattern and according disease of each pulse. Based on these findings, the fundamental meaning of Heo's theories and specific characteristics of the seven exterior pulses were understood. Methods : First, the 27 Pulses chapter of Heo Jun and Zhenmaimun chapter of Lichan were compared. Next, the Chandomaekgyeol and the Maijing were compared to determine bibliographical evidence of Heo's integration of pulse patterns. Based on the main references, the relationship between pattern and disease were studied, along with cases where the principles of the 27 pulses were applied in the Maekbeob chapter of the Donguibogam. Results & Conclusions : In the 27 Pulses chapter, Heo undertook the task of integrating the pulse patterns based on the differentiation of the excessive type and deficient type, along with the awareness of the issue of pulse pattern and disease matching. In specific, he organized and integrated the linguistic expressions of pulses in major pulse texts, directly intervening in places that he felt needed additional explanation. In conclusion, we found that the 27 pulses are systematic, rational, and unique in terms of pulse integration.