• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6A
• /
• pp.427-435
• /
• 2012

In order to evaluate the effects of exposure conditions on the resistance to sulfate attack of normal and blended cement mortars, several mechanical characteristics of the mortars such as expansion, strength and bulk density were regularly monitored for 52 cycles under sodium sulfate attack. The mortar specimens were exposed to 3 different types of exposure conditions; 1) continuous full immersion(Exposure A), continuous half-immersion(Exposure B) and cyclic wetting-drying(Exposure C). Experimental results indicated that the maximum deterioration was noted in OPC mortar specimens subjected to Exposure B, showing the wide cracks in the portions where attacking solution is adjacent to air. Additionally, the beneficial effect of ground granulated blast-furnace slag and silica fume was clearly observed showing a superior resistance against sodium sulfate attack, because of its lower permeability and densified structure. Thus, it is suggested that when concrete made with normal cement is exposed to sulfate environment, proper considerations on the exposure conditions should be taken.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.12
• /
• pp.1322-1328
• /
• 2009

This paper presents vibration analysis of maskless exposure module in printed circuit board(PCB) manufacturing system. In order to complete exposure process in PCB, masking type module has been widely used in electronics industries. However, masking process confronts some limitations of application due to higher production cost for masking as well as lower printing resolution. Therefore, maskless exposure module is started to be in the spotlight for flexible production system to meet the needs of fabrication in variable patterns at low cost. Since maskless exposure process adopts direct patterning to PCB, vibration problems become more critical compared to conventional masking type process. Moreover, movements of exposure engine as well as stage generate vibration sources in the system. Thus, it is imperative to analyze the vibration characteristics for the maskless exposure module to improve the quality and accuracy of PCB. In this study, vibration analysis using the finite element analysis is conducted to identify the critical structural parts deteriorating vibration performance. Also, Experimental investigations are conducted by single/dual encoder measurement process under the operating module speed. Measurement points of vibration are selected by three places, which are base of stage, exposure engine and top of stage, to check the effect of vibration from the exposure engine. Comparisons between analysis results and experimental measurement are conducted to confirm the accuracy of analysis results including the developed FE model. Finally, this studies show feasibility of optimal design using the developed FE analysis model.

• Journal of Broadcast Engineering
• /
• v.22 no.3
• /
• pp.327-338
• /
• 2017

Exposure fusion is a typical image fusion technique to generate a high dynamic range image by combining two or more different exposure images. In this paper, we propose block-based exposure adjustment considering unique characteristics of human visual system and improved saturation measure to get weight map. Proposed exposure adjustment artificially corrects intensity values of each input images considering human visual system, efficiently preserving details in the result image of exposure fusion. The improved saturation measure is used to make a weight map that effectively reflects the saturation region in the input images. We show the superiority of the proposed algorithm through subjective image quality, MEF-SSIM, and execution time comparison with the conventional exposure fusion algorithm.

• Journal of Environmental Health Sciences
• /
• v.45 no.1
• /
• pp.71-81
• /
• 2019

Objectives: The lung injuries by exposure to the humidifier disinfectants (HDs) were reported in 2011, Korea. For the HD victims, environmental exposure level and clinical diagnosis were conducted to determine the levels of damage by HDs. Methods: The exposure assessment to the HDs from 1st to 4th questionnaire surveys were carried out for 5,245 victims. And the affecting factors of exposure levels were analyzed by characterizing exposure and demographic information. By using of exposure concentration and cumulative time, exposure levels were classified and compared by percentage of clinical diagnosis classes. The high exposure and low clinical diagnosis rating groups, and low exposure and high clinical diagnosis rating groups were analyzed to overcome the limitation of past exposure assessment such as recall bias. Results: Among the all applicants damaged by the humidifier disinfectants, survivors were 4,028 and the dead were 1,217. And male and female were 2,675, and 2,547, respectively. In case of occurrence age of lung disease, under 10 years was majority age group (1,536) and followed by thirties (917). Pregnant women and fetuses were 339 and 439, respectively. And the damages by exposure to the HDs were concentrated on these susceptible populations in groups with low exposure and high clinical diagnosis rating. On the other hand, the groups classified by high exposure and low clinical diagnosis rating were shown different characterization. Conclusions: The questionnaire survey on past exposure may be uncertain due to recall bias. However, the relationship between classified exposure levels and clinical diagnosis ratings might be shown positive correlation if the exposure assessment errors were analyzed and controlled.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.1
• /
• pp.10-20
• /
• 2022

Objectives: The aim of this study is to evaluate exposure levels of the extremely low frequency magnetic fields(ELF-MF) radiated from various electric facilities in Liquid Crystal Display(LCD) manufacturing processes. Methods: This study measured the exposure levels of personal and local ELF-MF for the electronic facilities installed in two LCD manufacturing companies. Samplers were installed around workers' waist during working hours to identify personal exposure levels, and direct reading equipment were located at 3 cm, 10 cm, and 30 cm away from the surface of the electronic facilities to measure local exposure levels. Average and maximum(ceiling) values were calculated for personal and local exposure levels. Results: Average and maximum of personal exposure levels for each worker were 0.56(mean) ± 0.02(SE) µT and 6.31 ± 0.75 µT, respectively. Statistical analyses of the study found that maximum of the personal exposure levels for engineers was significantly higher than that for operators since engineers spend more time near the electronic facilities for repairing. The range of maximum personal exposure levels was 0.50 ~ 43.50 µT and its highest level was equivalent to 4.35 % of ACGIH(American Conference of Governmental Industrial Hygienists) exposure limit value(1 mT). Maximum of local exposure levels was 8.18 ± 0.52 µT and the electronic facilities with higher exposure levels were roof rail and electric panel, which were not related to direct manufacturing. The range of maximum local exposure levels was 0.60 ~ 287.20 µT and its highest level was equivalent to 28.7 % of the ACGIH exposure limit value. Lastly, the local exposure levels significantly decreased as the measurement distance from the electronic facilities increased. Conclusions: Maximum of personal and local exposure levels did not exceed the exposure limit value of ACGIH. However, it is recommended to keep the workers as far as possible from the sources of ELF-MF.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.369-372
• /
• 2001

We studied the electro-optical (EO) performance in the vertical-alignment (VA) - l/4$\pi$ cell photoaligned with polarized UV exposure on a homeotropic photopolymer surfaces. Excellent voltage-transmittance curve in the VA - l/4$\pi$ cell photoaligned with polarized UV exposure for 3 min on the photopolymer containing cholesterol group of 8% can be achieved. The V-T characteristics in the VA-l/4$\pi$ cell photoaligned on the photopolymer surface can be improved by increasing cholesteryl group. For response time measurement, the transmittance characteristics of the VA-l/4$\pi$ cell photoaligned on the photopolymer surface was better than that of the VA-l/4$\pi$ cell rubbingaligned on a polyimide(Pl) surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.3
• /
• pp.253-257
• /
• 2002

A new photoalignment material PNC, pole norbornene-2,3-dicarboxyolyl cholesterol, was synthesized and the electro-optical (EO) characteristics of the vortical-alignment (VA) liquid crystal display (LCD) photoaligned with UV exposure on the PNC surface were studied. EO characteristics of the photoaligned VA-LCD using a UV filter-less method was better than that of the UV filter method on the PNC surface for short UV exposure time. The response time of the photoaligned VA-LCD on the PNC surface without UV filter on the PNC surface is almost the same compared with the rubbing aligned VA-LCD.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.8
• /
• pp.670-674
• /
• 2001

The electro-optical (EO) performance in the vertical-alignment (VA) - 1/4$\pi$ cell photoaligned with polarized UV exposure on a homeotropic photopolymer surfaces was investigated. Excellent voltage-transmittance curve in the VA - 1/4$\pi$ cell photoaligned with polarized UV exposure for 3 min on the photopolymer containing cholesteryl group of 8% can be achieved. The V-T characteristics in the VA-1/4$\pi$ cell photoaligned on the photopolymer surface can be improved by increasing cholesteryl group. For response time measurement, the transmittance characteristics of the VA-1/4$\pi$ cell photopolymer surface was better than that of the VA-1/4$\pi$ cell rubbingaligned on a polyimide(PI) surface.

• Korean Journal of Human Ecology
• /
• v.16 no.4
• /
• pp.699-710
• /
• 2007

The study purposes to explore the effects of individual characteristics and home environments of children on their bilingual language aquisition, that is, to examine whether their English language competency is different from their Korean language competency depending on those variables. Thus English or Korean language competency of children who had had early exposure in English learning were studied in terms of child's individual characteristics such as age, gender, exposure period to English, intelligence, and experiences of visiting English-speaking countries, and home environments such as parental age, educational level, income level, their perceived English competency, their perceived significance of English and Korean language, and the frequency of using English at home. 72 children who went to English kindergarten were tested with Peabody Pictures Vocabulary Test-Revised (PPVT-R) in Korean version and in English version respectively. The results show that child's intelligence and experiences of visiting English-speaking countries influence their Korean language competency. Also child's age, exposure period to English and experiences of visiting English-speaking countries influence their English language competency. Moreover their mother's educational background, father's English fluency, mothers' English fluency, and the frequency of using English at home influence child's English language competency, whereas any variables did not influence child's Korean language competency. Accordingly, child's English and Korean language competencies are related to each other.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.358-361
• /
• 2001

A new photoalignment material PMI5CA, poly{N-(phenyl)maleimide-co-3-[4-(pentyloxy) cinnamate]propyl-2-hydroxy-1-methacrylate}, was synthesized and the electra-optical (EO) characteristics in the vertical-aligned (VA) liquid crystal display (LCD) photo-aligned on the photopolymer surface were studied. Excellent voltage-transmittance(V-T) characteristics in the VA-LCD photoaligned with polarized UV exposure of oblique direction on the pohotopolymer surfaces for 1 min can be achieved. The transmittance of the VA-LCD photoaligned on the photopolymer surface decreased with increasing UV exposure time. We suggest that the decrease of transmittance in the VA-LCD photoaligned on the photopolymer surface is attributed to the dissociation of the ester linkage in the photodimerized cinnamate structure with increasing UV exposure time