• Explosives and Blasting
• /
• v.24 no.2
• /
• pp.65-73
• /
• 2006

Blast vibrations produced by emulsion explosives, controlled explosives and no vibration Kinecker through test blasting have been analyzed. Test area is mainly composed of andesite of which uniaxial compressive strength is $1,260kg/cm^2$. The empirical scaling formula from a logarithmic plot of peak particle velocity versus scaled distance have been determined and particle velocities with scaled distance have been evaluated for each explosive type. Vibration level of no vibracon KINECKER is lower than one of the controlled vibration blasting by about 30.71% and also lowers than one of the blasting of medium by about 50.94%.

• Explosives and Blasting
• /
• v.39 no.2
• /
• pp.27-36
• /
• 2021

Recently, the demand for demolition for the unnecessary steel frame structure is increasing due to deterioration and unsatisfactory functional conditions and the major highlights of demolition issues. This execution case was intended to describe an application of the felling method as one about the suggested method for explosive demolition method of ore bin and coke bin facilities, which were steel frame structures. And we used the charging container for blast cutting of the steel frame structure. As a result of the explosive demolition, the ore bin and coke bin had collapsed precisely according to the estimated direction. And the explosive demolition was completed without causing any damage to surrounding facilities.

• Explosives and Blasting
• /
• v.40 no.2
• /
• pp.15-24
• /
• 2022

Recently, the demand of demolition for the unnecessary industrial structure is increasing due to deterioration tendency and the issue of demolition is becoming a major highlight. The restoration of the dismantled industrial site to its original natural state was currently underway. This execution case was intented to describe an application of the felling method one of the explosive demolition method to the demolition of the industrial stack. This stack was 150m high, a composite structure in which the outer wall of the stack was a reinforced concrete shell structure and internal stovepipe was a steel shell structure. As as result of the explosive demolition, the stack had collapsed precisely according to estimated direction. And the explosive demolition was completed without causing any damage to surrounding facilities.

• Explosives and Blasting
• /
• v.40 no.3
• /
• pp.54-65
• /
• 2022

Recently, the demand for the dismantling of large-scale industrial structures is increasing, and the construction of restoring the dismantled industrial to their original natural environment is underway. This case was an application of the explosive demolition method to the demolition of a large section turbine foundation structure which structural obsolescence and failure to meet functional requirements. As a result of the explosive demolition, the fracture condition of the turbine foundation was satisfactory, and the explosive demolition was completed without causing any damage to the surrounding facilities.

• Journal of Industrial Technology
• /
• v.5
• /
• pp.9-14
• /
• 1985

The blast-induced ground vibrations is one of the most important factors which is considered to design blasting patterns in urban excavation. To compare with vibration level of different explosives, peak particle velocity of each explosive was measured. The results are summerized as follows. 1. Among the three kinds of explosives, the largest vibration was obtained from the gelatine dynamite, while the smallest was blasting of ammonium nitrate. 2. The vibration levels of ammonium nitrate and slurry explosive were smaller about 35%, 20% respectively than that of gelatine dynamite.

• Explosives and Blasting
• /
• v.29 no.1
• /
• pp.27-33
• /
• 2011

Concussion shots were conducted for SS400, a general structural steel, and SM490, a structural steel for welding, using TNT, which is used as a standard explosive. The ability to cut the steels was compared for different combinations of charges and materials. The results show that the amount of explosives used for SM490 requires more 30% than SS400.

• Explosives and Blasting
• /
• v.17 no.4
• /
• pp.8-17
• /
• 1999

Unfortunately leaks occur in heat exchangers periodically, usually at the tube to tubeplate joint. The usual method of repair is to plug off the defective area and isolate the tubes of concern from the circuit. If the leaks continua the thermal capacity of the units is progressively reduced and for this reason the alternative of using an internal bridging sleeve has been examined. This paper discusses the overall development activities that has been found necessary to bring this repair procedure to a successful conclusion for use on the nuclear steam generator. In this work we have investigated optimum explosives and explosive quality, explosive sleeving's thickness, the design of sheath stress relieving heat treatment pull-out load, hydraulic leakage, stress corrosion cracking properties. The results obtain are as follows : (1) The optimum explosives and explosive qualities are PETN and about 15~40 gr/ft of explosive sleeving in nuclear steam generator. (2) Explosive sleeving's thickness is 1.1~l.4mm, If groove of 0.35mm formed in sleeve outside existed, For the hydraulic leakage is go up, explosive sleeving of formed groove are applicate tube and turnplate. (3) If the stress relieving heat treatment are experiment in $750^\circ{C}$, $850^\circ{C}$, 15 minutes Pull-out strength of sleeving 1,500~2,300kg, hydraulic leakage is $250kg/cm^2$.

• Explosives and Blasting
• /
• v.19 no.1
• /
• pp.19-30
• /
• 2001

본 논문에서는 수상구간의 우물통 기초 철거공법을 약액(팽탕성 과괴제) 주임공법에서 발파공법으로 변경하여 공사기간을 단축시키면서도 주변의 보안물건에 대한 공해를 발생시키지 않고 안전하게 공사하여 원가를 절감한 사례를 중심으로 발파공법을 고찰하였다.

• Explosives and Blasting
• /
• v.31 no.2
• /
• pp.1-5
• /
• 2013

Parameters of Swedish bench blast design was analyzed by robust design method. Orthogonal array which is adopted in this study was $L_9(3^4)$ and the parameters were hole diameter, explosive type, hole inclination and rock factor of 3 levels. Result of analysis showed that maximum and minimum burden are most affected by hole diameter, followed by explosive type, rock type and inclination of hole. Parameters affecting specific charge are in the order of rock type, explosive type and to specific drilling are hole diameter and explosive type. Cost analysis showed that robust design is capable of parameter optimization.

• Explosives and Blasting
• /
• v.26 no.2
• /
• pp.52-63
• /
• 2008

Recently the demand of demolition for the unnecessary cylindrical silo structure is increasing due to deterioration and unsatisfactory functional conditions and the issue of demolition is becoming a major highlight. This case study introduced the explosive demolition of the cylindrical silo structure by felling method. The results of explosive demolition conducted on cylindrical silo structure using the felling method show, A silo had collapsed precisely according to estimated direction but in case of B silo there was a minor difference. The lower colunms and ring girder support was designed to the hinge line but in reality the lower colunms of the silo did not do its structural support role and only the ring girder support did its role successfully. As for the impact vibration, most of the measurements were within the estimated range.