• 제목/요약/키워드: explosion hazardous range

검색결과 18건 처리시간 0.03초

EPS공정에서 발생하는 n-Pentane의 화재폭발에 대한 위험성평가 및 위험성 완화 대책에 관한 연구 (A Study on the Risk Assessment and Mitigation Plan about Fire Explosion of n-Pentane in EPS Process)

  • 서민수;김기석;김보민;강동천;강길재;천영우
    • 한국위험물학회지
    • /
    • 제6권2호
    • /
    • pp.39-46
    • /
    • 2018
  • 최근 전자제품 생산업체에서 EPS를 직접생산하게 되면서 EPS 공정이 증가하고 있다. EPS에는 펜탄이 포함되어 있으며, 펜탄은 하이브리드 혼합물로 구분할 수 있어 높은 화재폭발의 위험성을 가지고 있다. 각 공정별 펜탄의 누출률은 발포기, 사일로실, 저장실 순이나 발포기의 경우 일반적으로 밀폐되어 있으므로 사일로 실이 가장 화재폭발 위험성이 높다고 판단하였다. 사일로실의 누출률 중 70%는 사일로 상단을 통해 누출되며, 사일로 상단을 통해 누출되는 펜탄의 거동을 분석하여 사일로실 위험성 완화대책을 수립하였다. 1. 폭발위험구역 2종으로 관리, 2. 사일로상단 50cm이내 환기설비 설치 또는 Push-Pull 구조의 환기설비설치, 3. 사일로 하단 1.4m이내에 가스감지기 설치, 4. 60%이상의 습도유지

반도체 산업의 SEMI S6에 따른 실험결과 및 누출률을 기준으로 한 증기 상 물질의 2차 누출 시 폭발위험장소에 관한 연구 (A Study on the Explosion Hazardous Area in the Secondary Leakage of Vapor Phase Materials Based on the Test Results and the Leak Rate According to SEMI S6 in the Semiconductor Industry)

  • 김상령;임근영;양원백;임종국
    • 한국가스학회지
    • /
    • 제24권2호
    • /
    • pp.15-21
    • /
    • 2020
  • 현재 KS C IEC 60079-10-1 등에서 2차 누출 시 누출 구멍의 반경(hole radius)은 권고로 하여 표현되어 있다. 누출 구멍 크기의 과소평가는 누출률에 대한 계산 값의 과소평가로 이어질 수 있고, 안전상의 이유로 검토되는 누출 구멍 크기의 보수적인 계산은 과대평가로 이루어 질 수 있어 과대한 위험장소 범위로 나타낼 수 있기 때문에 이 또한 피해야 한다. 그러므로 누출 구멍의 크기를 추정할 때에는 신중하게 균형 잡힌 접근이 필요하다. 이러한 논리를 바탕으로 하여 금번 연구에서는 반도체 산업에서 적용되는 국제안전규격인 SEMI S6 기준에 따른 실험결과로 위험물질 누출 시 가스박스 내부 농도를 파악하여 안정성을 검토해보고 SEMI F15 누출률 기준, SEMI S6 누출률 기준에 따라 KS C IEC 60079-10-1의 공식을 적용하여 폭발위험장소의 범위 선정을 실시하였다. 이를 바탕으로 하여 향후 반도체 산업 등 폭발위험장소의 적용이 까다로운 FAB 설비의 대안으로 배기성능 향상이 필요한지 여부를 검토해보고자 한다.

LPG 충전소의 가스누출에 따른 피해예측 및 감소방안 (Predicting and Preventing Damages from Gas Leaks at LPG Stations)

  • 양용호;공하성
    • 문화기술의 융합
    • /
    • 제9권4호
    • /
    • pp.577-585
    • /
    • 2023
  • 이 연구는 LPG 충전소의 가스누출로 발생이 예상되는 화재 및 폭발에 따른 피해예측에 ALOHA 프로그램을 적용 영향범위와 거리를 도식화함으로 피해방지 방안을 제시하였다. LPG 충전소에서 프로판 가스가 누출될 경우 LPG 충전소 주변지역 주민들에게 호흡곤란 등의 인명피해 및 건물파괴 등 재산피해를 입히는 것으로 나타났다. 이의 감소방안으로 첫째 LPG 충전소의 위험물안전관리자는 수시로 계측기와 안전밸브가 제대로 작동하는지 점검하여 누출을 사전에 방지할 필요가 있다. 둘째 LPG 충전소에서 저장탱크에 충전하는 작업은 위험물안전관리법 규정에 따라 "위험물안전관리자 교육"을 받고, 소방관서에서 "위험물안전관리자"로 선임된 사람의 책임하에 해야 한다는 것이다. 셋째 LPG차량의 과충전 방지장치 등 각종 안전장치의 기능을 평상시 정기적으로 점검할 필요가 있다. 마지막으로 LPG 충전소에 가스가 누출될 때 정전기에 의해 화재가 발생할 수 있으므로 정전기를 방지할 수 있는 작업복·작업화를 착용하는 등의 조치로 정전기발생을 억제하는 것이 바람직하다.

고속도로 휴게소 소형 LPG 저장탱크 폭발에 따른 영향범위 분석 (Impact Range Analysis of Small LPG Storage Tank Explosions at Highway Rest Areas)

  • 전승덕;이순범;이재영
    • 문화기술의 융합
    • /
    • 제9권6호
    • /
    • pp.319-327
    • /
    • 2023
  • 이 연구의 목적은 고속도로 휴게소에 설치된 소형 LPG 저장탱크의 폭발에 따른 영향범위를 분석하는데 있다. 이를 위해 휴게소에 설치된 2,900 kg 소형 LPG 저장탱크의 증기운 폭발(VCE)과 비등액체팽창증기 폭발(BLEVE)로 인한 과압과 복사열의 영향범위를 ALOHA(Areal Location of Hazardous Atmospheres)프로그램을 적용하여 정량적으로 평가하였다. 도출된 폭발 과압과 복사열의 영향범위는 각각 최대 반경 336 m와 423 m로 나타났다. 269 m 이내의 사람들은 3.5 psi이상의 과압으로 중상을 입을 수 있고, 192 m 이내의 사람들은 10 kw/m2이상의 복사열로 사망할 수 있는 것으로 예측되었다. 나아가 고속도로 휴게소 부대시설과 피해 영향범위를 고려한 LPG 저장 탱크의 안전관리 방안에 대해 논의하였다. 이러한 연구 결과는 고속도로 휴게소에 설치된 소형 LPG 저장탱크의 안전관리뿐만 아니라 휴게소 환경 및 시설을 고려한 안전사고 예방 규정 개선에 도움을 줄 수 있을 것이다.

KGS GC101을 통한 가스시설 폭발위험장소의 설정 (Area Classification of Hazardous Gas Facility According to KGS GC101 Code)

  • 김정환;이민경;길성희;김영규;고영규
    • 한국가스학회지
    • /
    • 제23권4호
    • /
    • pp.46-64
    • /
    • 2019
  • 폭발위험장소의 선정과 거리계산에 대한 상세기술기준 KGS GC101 2018(가스시설의 폭발위험장소 종류 구분 및 범위 산정에 관한 기준)이 제정되어, 2018년 7월 12일부터 시행되었다. IEC60079-10-1 2015 (Explosive atmospheres Part 10-1: Classification of areas - Explosive gas atmospheres)에 대한 전수 내용을 정리하고, 모호한 기준의 해석이나 기준에 대한 가이드라인을 추가하여 제정하였다. KGS GC101은 폭발위험장소 종류의 구분을 위한 방법으로 (1)누출등급의 결정 (2)누출 홀 크기의 결정 (3)누출유량의 결정 (4)희석등급의 결정 (5)환기유효성의 결정을 통하여 최종적으로 (6)위험장소의 결정 (7) 폭발위험장소 범위의 산정을 할 수 있다. 이 과정을 쉽게 계산하기 위하여 Visual Basic for Application (Excel) 언어로 구성한 프로그램(KGS-HAC, C-2018-020632)을 한국가스안전공사에서 제작하였고, 현재 시범 사용 중(2019년 4월 1일 현재 v1.14)에 있다. 그럼에도 불구하고 현장에서 어려워하여, 본 논문을 통하여 코드 및 프로그램의 사용법을 설명하는 것으로 해결코자 한다.

폴리실리콘 제조 공정에서 화학물질 누출 시 피해범위에 관한 연구 (A Study on the Damage Range of Chemical Leakage in Polysilicon Manufacturing Process)

  • 우종운;신창섭
    • 한국가스학회지
    • /
    • 제22권4호
    • /
    • pp.55-62
    • /
    • 2018
  • 지구온난화로 인하여 태양광 발전에 대한 관심이 커지고 있다. 이에 따라 태양전지를 만드는 핵심물질인 폴리실리콘의 수요도 나날이 증가하고 있으며 시장이 커짐에 따라 생산공정에서 크고 작은 사고들이 발생하고 있다. 그 예로 2013년 상주시의 폴리실리콘 제조공장에서 염산이 누출되었고 2014년에는 여수시의 폴리실리콘 제조공장에서 화재가 발생하였으며, 2015년에는 군산시의 폴리실리콘 제조공장에서 STC(Silicon Tetrachloride)가 누출되었다. 이러한 누출 사고들은 사업장 내부에만 영향을 주는 것이 아니라 인근지역까지 영향을 줄 수 있다는 것이 특징이다. 따라서 본 연구에서는 폴리실리콘 제조공정에서 사용되는 위험물질을 파악하고, 최악의 누출 시나리오를 적용했을 때 누출량과 피해범위를 정량적으로 예측하였다. 그 결과 폭발에 따른 피해거리는 726 m로 예측되었고, 독성에 대한 피해거리는 4,500 m로 예측되었다. 그리고 TCS(Trichlorosilane), STC(Silicon Tetrachloride), DCS(Dichlorosilane)가 누출되어 공기 중의 수분과 반응하여 HCl이 생성될 경우 피해거리는 최대 5.7 km까지로 예측되었다.

중소규모 화학공장의 압력방출시스템에 대한 안전성 검토 (Review of Safety for Pressure-Relieving Systems of Small to Middle Scale Chemical Plants)

  • 임지표;진대영;마병철;강성주;정창복
    • 한국안전학회지
    • /
    • 제30권6호
    • /
    • pp.48-55
    • /
    • 2015
  • A variety of safety issues were investigated for chemical reactors using a toluene solvent in case of a fire at small to middle scale chemical plants. The issues covered the operation of pressure-relieving valves and the subsequent discharges of the toluene to the atmosphere either directly or through an absorber, which represent the current practice at most small chemical plants. It was shown that the safety valve on the reactor may not operate within about twenty minutes after an external fire breaks out, but, once relieved, the toluene vapor released directly to the atmosphere may form a large explosion range on the ground. It was also shown that if the discharge is routed to an existing absorber used for the scrubbing of volatile organic compounds or dusts, the column may not operate normally due to excessive pressure drops or flooding, resulting in the hazardous release of toluene vapors. This study proposed two ways of alleviating these risks. The first is to ruduce the discharge itself from the safety valve by using adequate insulation and protection covers on the reactor and then introduce it into the circulation water at the bottom of the absorber through a dip linet pipe equipped with a ring-shaped sparger. This will enhance the condensation of toluene vapors with the reduced effluent vapors treated in the packing layers above. The second is to install a separate quench drum to condense the routed toluene vapors more effectively than the existing absorber.

벤진의 유해 위험성과 작업환경 노출기준 연구 (A Study on the Hazardousness and the TLV in Working Environments of Benzine)

  • 김현영;이성배;한정희;신재훈
    • 한국산업보건학회지
    • /
    • 제16권3호
    • /
    • pp.233-244
    • /
    • 2006
  • Of many volatile organic detergents for metals, benzine(CAS No. 8030-30-6), of which the toxicity has not yet been proven, has been used as an alternative of the halide compounds in the consideration of toxic effects, global warming and the destruction of ozone layer. In order to evaluate the effects of the benzine on human body by investigating the subchronic inhalation toxicity, to obtain the basic data for establishing the criteria of exposure in working environments and to classify the hazardousness in compliance with the Industrial Safety and Health Act by evaluating the hazardousness, repeated inhalation exposure test was carried with SD rats. The rats were grouped by 10 females and males each. The repetitive inhalation exposures were carried out at 4 levels of concentration of 0 ppm, 60 ppm, 300 ppm, and 1,500 ppm, for 6 hours a day, 5 days a week, for 13 weeks. The results are described hereunder. 1. No death of the animals of the exposed and controlled groups in the test period. Not any specific clinical symptoms, change in feed intake quantity, abnormality in eye test, or change in activity were observed. 2. In the 300 ppm and 1,500 ppm groups, weight reduction in the female groups and weight increase of liver and kidney in the male groups compared with control group were observed with statistical significance(p<0.05). 3. In the blood test, the HCT increased in the male 300 ppm group and the number of hematocyte increased, MCV and MCH decreased in the male 1,500 ppm group. In the female 1,500 ppm group, the HB decreased and the distribution width of the hematocyte particle size increased. In the blood biochemistry test, the TP in the male 1,500 ppm group and the LDH in the female 1,500 ppm group were increased with statistical significance(p<0.05). 4. Under the test conditions of the present study with SD rats, the NOEL was evaluated to be from 60 ppm to 300 ppm for both male and female groups. By extrapolation, the NOEL for human who work 8 hours a day was evaluated to be from 128 ppm to 640 ppm 5. Since the NOEL evaluated in this study do not exceed 60ppm(0.184 mg/L) the test material does not belong to the classification of the hazardous substance "NOEL${\leq}$0.5mg/L/6hr/90day(rat), for continuous inhalation of 6hours a day for 90 days" nor to the basic hazardous chemical substance class 1(0.2 mg/L/6hr/90day(rat) defined by the GHS which is a criteria of classification and identification of chemical compounds. However, considering the boiling point($30-204^{\circ}C$), flashing point($-40^{\circ}C$), vapor pressure(40 mmHg), and the inflammable range(1.0 - 6.0 %), sufficient care should be taken for handling in the safety aspects including fire or explosion.