• 한국국방경영분석학회지
• /
• 제36권3호
• /
• pp.57-68
• /
• 2010

이 연구는 복합시스템 구축과 소요제기 결정에 활용하기 위하여 복합시스템 엔지니어링과 아키텍처 방법론으로 개발한 복합시스템 개념설계 모형을 제시하고 있으며, 모형의 검증은 Process Transition Map, 전문가 설문기법으로 수행하였다. 또한 미래 전력발전에 활용할 수 있도록 종합전투실험체계에 대한 개념설계를 프로세스 단계별 산출물을 작성하여 제시하였다.

• Journal of Korean Biological Nursing Science
• /
• 제17권4호
• /
• pp.324-330
• /
• 2015

Purpose: The purpose of this study was to analyze the trends in Korea of nursing research using animals. Methods: 45 articles were reviewed with descriptive statistics from 2000 to 2015. Results: Nearly 50% of the studies were supported by research funds. Most of the animal species in the studies were rats (81.1%) and mice (15.6%). The major animal models for human disease were cerebrovascular diseases (24.4%), skin problems (17.8%), and nerve injuries (15.5%). Immunohistochemistry (24.3%) was mainly used as an experimental technique. The main intervention and treatments used in the studies were chemical treatments, exercise and surgery. Conclusion: In this review, relevant results were described to identify the trends of nursing research using animal experimentation in Korea. Expansion of various nursing research using animal models can be required for gaining knowledge applicable to the same conditions in humans.

• 한국군사과학기술학회지
• /
• 제18권6호
• /
• pp.743-754
• /
• 2015

FASCAM is a newly introduced mean against enemy fire power and supposed to be scattered on base areas in front of a tunnel so as to deter maneuver and shooting of enemy artilleries. However, for its characteristics different from conventional munitions, only a few studies have been undertaken on operations system using this new measure. In this research, we propose a procedure to describe and analyze mathematically an operation system for suppression of enemy fire power using FASCAM. Two suggested simulation methods, impact point generation and density integration, both can describe the actual operation rationally and each has advantages of its own respectively. Further, we demonstrated an example analysis to derive an optimal suppression plan based on the proposed procedure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.958-967
• /
• 2004

This paper deal with cause and analysis about case of collapsed reinforced-soil retaining wall. The analysis of the cause was carried through experimentation, slop stability analysis and literature study. The experimentation treated the large direct shear test, the hydraulic conductivity test and the other basic test through backfill extracted from collapsed reinforced-soil retaining wall. The ultimate tensile strength was established by rib tensile strength test of geogrid. The analysis of internal and external stability of reinforced-soil retaining wall was performed on the basis of parameters. The result of analysis, reinforced-soil retaining wall and the slope at the dry season are stable. However, the factors that fine-grained soil at hydrometer test exceed the standard of the design, rainfall duration is too long at the time of collapse and monthly pricipitation is heavy are cause of the collapse.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.1085-1092
• /
• 2006

Response surface methodology(RSM) is a useful collection of experimentation techniques for developing, improving, and optimizing products and processes. When we are to estimate second-order regression model and optimize quality characteristic by RSM, central composite designs and Box-Behnken designs are widely in use. However, in developing cutting-edge products, it is very crucial to reduce the time of experimentation as much as possible. In this paper small-sized second-order designs are introduced and their estimation abilities are compared in terms of D-optimality, A-optimality, and variance of regression coefficients. The result of this study will be beneficial to experimenters who face experiments which are expensive, difficult, or time-consuming.

• Nuclear Engineering and Technology
• /
• 제47권2호
• /
• pp.212-218
• /
• 2015

We describe a comparative analysis of different tools used to assess safety-critical software used in nuclear power plants. To enhance the credibility of safety assessments and to optimize safety justification costs, $Electricit{\acute{e}}$ de France (EDF) investigates the use of methods and tools for source code semantic analysis, to obtain indisputable evidence and help assessors focus on the most critical issues. EDF has been using the PolySpace tool for more than 10 years. Currently, new industrial tools based on the same formal approach, Abstract Interpretation, are available. Practical experimentation with these new tools shows that the precision obtained on one of our shutdown systems software packages is substantially improved. In the first part of this article, we present the analysis principles of the tools used in our experimentation. In the second part, we present the main characteristics of protection-system software, and why these characteristics are well adapted for the new analysis tools. In the last part, we present an overview of the results and the limitations of the tools.

• Smart Structures and Systems
• /
• 제19권5호
• /
• pp.567-576
• /
• 2017

Design of piezoelectric energy harvester for a wide operating frequency range is a challenging problem and is currently being investigated by many researchers. Widening the operating frequency is required, as the energy is harvested from ambient source of vibration which consists of spectrum of frequency. This paper presents a new technique to increase the operating frequency range which is achieved by designing a harvester featured by a propped cantilever beam with variable over hang length. The proposed piezoelectric energy harvester is modeled analytically using Euler Bernoulli beam theory and the effectiveness of the harvester is demonstrated through experimentation. The results from analytical model and from experimentation reveal that the proposed energy harvester generates an open circuit output voltage ranging from 36.43 V to 11.94 V for the frequency range of 27.24 Hz to 48.47 Hz. The proposed harvester produces continuously varying output voltage and power in the broadened operating frequency range.

• 산업경영시스템학회지
• /
• 제30권2호
• /
• pp.23-28
• /
• 2007

"Getting to market first" is extremely critical in this competitive business environment. The speed at which products are developed and released to market is tightly linked to profitability and market share. Many companies that have been very skeptical of Rapid Tooling (RT) technologies developed so far are working on Hybrid Tooling (HT) that can really meet the market standards. This paper describes the experimentation how HT process has been being successfully established and effectively applied with typical case study. Through the experimentation, Ceramic-filled HT was found to be aptly suited for the low grade mold, both in terms of the lead time, dimensional accuracy, and tooling cost.

• 산업기술연구
• /
• 제25권A호
• /
• pp.75-80
• /
• 2005

A trapezoidal fin is analyzed by using one-dimensional analytic method. For two boundary conditions, the heat transfer rate is given instead of specified temperature at the fin base and heat conduction into the fin tip is equal to heat convection from the tip. Temperatures at three different points within the trapezoidal fin are measured by using experimental apparatus. A comparison of the temperature between one-dimensional analytic method and experimentation is made as a function of dimensionless fin length under both free convection and forced convection conditions. The ratio of heat loss from the fin tip surface to that through the fin base is presented as a function of dimensionless fin length and Biot number. One of results shows that the relative error increases as the air velocity increases for forced convection conditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.579-584
• /
• 1997

This experimentation is to apperciation an efficiency of repair for processing crack by corrosion of steel reinforcing, Crack on concrete by corrosion of steel reinforcing is the fact that the first crack appear on the surface of water because of supplying is of oxygen and water. The crack processing is on surface to be contacted by air and to bottom as mainly the vertical direction from a surface of water. The experimentation gives rise to crack in model by electricity. Crack by corrosion of steel reinforcing is more internal crack than external crack. since it is so. crack by corrosion of steel reinforcing have to attention to repair or intermal crack.