• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.175.2-175
• /
• 2001

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.292.1-292
• /
• 2002

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.161.2-161
• /
• 2002

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.340.1-340
• /
• 2002

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.151-152
• /
• 2018

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1537-1546
• /
• 2017

Many thermal-hydraulic tests have been conducted at the Korea Atomic Energy Research Institute for verification of the SMART (System-integrated Modular Advanced ReacTor) design, the standard design approval of which was issued by the Korean regulatory body. In this paper, the contributions of these tests to the standard design approval of SMART are discussed. First, an integral effect test facility named VISTA-ITL (Experimental Verification by Integral Simulation of Transients and Accidents-Integral Test Loop) has been utilized to assess the TASS/SMR-S (Transient and Set-point Simulation/Small and Medium) safety analysis code and confirm its conservatism, to support standard design approval, and to construct a database for the SMART design optimization. In addition, many separate effect tests have been performed. The reactor internal flow test has been conducted using the SCOP (SMART COre flow distribution and Pressure drop test) facility to evaluate the reactor internal flow and pressure distributions. An ECC (Emergency Core Coolant) performance test has been carried out using the SWAT (SMART ECC Water Asymmetric Two-phase choking test) facility to evaluate the safety injection performance and to validate the thermal-hydraulic model used in the safety analysis code. The Freon CHF (Critical Heat Flux) test has been performed using the FTHEL (Freon Thermal Hydraulic Experimental Loop) facility to construct a database from the $5{\times}5$ rod bundle Freon CHF tests and to evaluate the DNBR (Departure from Nucleate Boiling Ratio) model in the safety analysis and core design codes. These test results were used for standard design approval of SMART to verify its design bases, design tools, and analysis methodology.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2534-2539
• /
• 2007

Launch vehicles are exposed to aerodynamic heating conditions while flying at high Mach numbers in the atmosphere. In this study aerodynamic heating test for fairing nose-cone was done using ATSF(Aerodynamic Thermal Simulation Facility) and Engineering Model for fairing. ATSF is a facility that can simulate given temperature profile using about 4,000 halogen heaters on fairing model. Aerodynamic heating profile is got from result of thermal analysis using MINIVER, Thermal Desktop and SINDA/FLUINT. After aerodynamic heat test, it is found that initial temperature of fairing inner surface and thickness of BMS has important effects on temperature of fairing inner surface. Also it is confirmed that maximum temperature of fairing nose-cone inner surface during flight is lower than allowable temperature limit. Later, thermal correlation between thermal analysis and experimental results will be done using aerodynamic heating test result

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.27-30
• /
• 2002

The particle velocity in superfluid helium (He II) induced by a gas dynamic shock wave impingement onto He II free surface were studied experimentally by using Schlieren visualization method with an ultra-high speed video camera. It is found form visualization results that a dark zone in the immediate vicinity of the vapor-He II interface region is formed because of the high compressibility of He II and is developed toward bulk He II with the flowing-down speed of the vapor-He II interface. The mass velocity behind a transmitted compression shock wave that is equal to the contraction speed of He II amounts to 10 m/sec, the Reynolds number of which reaches $10^{7}$. This fact suggests that the superfluid shock tube facility can be applied to an experimental facility for high Reynols number flow as an alternative to the superfluid wind tunnel.

• The KSFM Journal of Fluid Machinery
• /
• v.1 no.1 s.1
• /
• pp.58-63
• /
• 1998

To investigate turbine flow fields under realistic conditions, a rotating turbine test facility has been developed at the Inha University Propulsion Laboratory. The experimental facility consists of an air inlet, settling chamber, single turbine stage test section, and diffuser. This turbine has a design flow coefficient of 0.55 and work coefficient of 1.88. The turbine test rig has four features. First, a large scale test section improves space resolution. Second, low speed rpm enhances safety and reduces required power, Third, DC motor/generator is able to regenerate blower power. Fourth, various types of experiment can be carried out.

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.1
• /
• pp.54-60
• /
• 2001

In this paper, a shape-based block layout (SBL) approach is presented to solve the facility layout problem with unequal-area and fixed shapes. The SBL approach employs hybrid genetic algorithm (Hybrid-GA) to find a good solution and the concept of bay structure is used. In the typical facility layout problem with unequal area and fixed shapes, the given geometric constraints of unequal-area and fixed shapes are mostly approximated to original shape by aspect ratio. Thus, the layout results require extensive manual revision to create practical layouts and it produces irregular building shapes and too much unusable spaces. Experimental results show that a SBL model is able to produce better solution and to create more practical layouts than those of existing approaches.