• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.149-157
• /
• 2013

The weirs built so far are mainly overflow type weirs overflowing to the upstream. Main advantages of overflow type weirs are, effective water resources management and easy design, construction and maintenance due to many accumulated studies. However, due to the special feature of the overflow type weir where water overflows through the upstream of the weir, the silt coming from the upstream is not discharged to the downstream of the weir. This increases the river bed and reduces the reservoir capacity, and as a result, the weir loses its function. A underflow type weir with a water gate has been implemented in order to solve such sediment deposit and weir maintenance problems. However due to the design problem of recently constructed underflow type weirs, the river bed of the downstream of a weir has been scoured. And this leds to a structural problem. In this study, the flow characteristics of overflow type weirs and underflow type weir, hydraulic jump length analysis depending on change of water depth and the amount of specific energy loss generated per unit length depending on a weir type have been compared and analyzed, for the effective design and management of the weirs. The experiment results show that, when identical upstream conditions of underflow type weir and an overflow type weir were maintained, the hydraulic jump length was up to twice longer with Fr(Froude number) 3.5 of the hydraulic jump length at the underflow type weir, and the hydraulic jump length gradually decreased as the downstream water depth increased. The comparative analysis result of the amount of specific energy loss generated per unit length showed that the amount of energy loss per unit length was twice higher for an overlfow type weir than a underflow type weir. Therefore, in case of a underflow type facility, an additional energy reduction facility is determined to be necessary for safety of water construction structures.

• Korean Journal of Weed Science
• /
• v.15 no.2
• /
• pp.166-174
• /
• 1995

This experiment was conducted to investigate a cause of summer depression of cool season turfgrass, using nine cultivars in warm season and twenty-eight cool season turfgrasses. Even though an average of apparent photosynthesis(APS) per fresh weight was 13.09 mg $CO_2$/g/h in warm season turfgrass and 7.75 mg $CO_2$/g/h in cool season turfgrass, the Creeping bentgrass in cool season type was higher than Kikuyugrass and Bahiagrass in warm season type. The optimum temperature for the heighest APS was $30^{\circ}C$ in warm season type and $25^{\circ}C$ in cool season type. In $CO_2$ compensation point(CCP) as an index of dark respiration, it was higher in cool season turfgrass(75.6ppm) than warm season turfgrass(29.5ppm). In warm season type, even though the temperature increased from $25^{\circ}C$ to $40^{\circ}C$ the CCP was not increased. But the higher temperature rises the more increased CCP in cool season type. Dark respiration(DR) was higher in cool season type than warm season type under various temperature conditions, but the increasing ratio of DR with the temperature increment was not so much differed between two types.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.51-61
• /
• 2010

Ettringite $(Ca_6[Al(OH)_6]_2(SO_4)_3{\cdot}26H_2O)$ is a sulfate mineral that shows a complicate property in concrete. It is often called as "a cancer of concrete" because secondary ettringite formation in hardened concrete often cause expansion and cracking of concrete due to its expansive crystal structure. In the present study, we tested the possibility for crystal growth inhibition of secondary ettringite by crystallization inhibitors that are commercially used for scaling inhibitors in Korea. For the test, we developed a method of ettringite solution synthesis. Three types of crystallization inhibitors were selected and examined the effects On ettringite growth inhibition. The experimental results of ettringite solution synthesis indicated that ettringite was successfully synthesized under condition that the mass balance between calcium hydroxide saturated solution and aluminum sulfate solution was attained. Monosulfate and semisulfate were synthesized when the ratio of $Ca^{2+}$ ions to ${SO_4}^{2+}$ ions was increased. The induction time of ettringite crystallization was less than 2 min. and crystallization was almost completed within an hour. The experimental results of ettringite crystallization inhibition showed that organic PBCT (2-Phosphonobutane-1,2,4-Tricarboxylic Acid) and inorganic SHMP (Sodium Hexametaphosphate) were relatively less effective on ettringite crystallization inhibition under experimental conditions. However, organic HEDP (1-Hydoxyethylidene-1,1-Diphosphonic Acid) effectively prevented ettringite growth with producing amorphous gel phase materials up to inhibitor concentration 0.1 vol.% of aluminum sulfate solution.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.3
• /
• pp.307-315
• /
• 1988

This experiment was conducted to find out the effects of fertilizer-N and co-inoculation of the Rhizobium japonicum and the Azospirillum lipoferum on nodulation, $N_2$-fixation, and growth of soybean under in situ conditions. The results obtained were summarized as follows: 1. The yield of soybean dry matter was significantly greater in the R. japonicum alone, and the mixed inoculation of R. japonicum and A. lipoferum than those of un-inoculation. But inoculum applied by different strains did not significant effect on plant growth. The effects of nitrogen applied on soybean dry matter were higher in the ammonium sulfate than potassium nitrate, and decreased with increasing rates of two forms of nitrogen applied regardless of nitrogen source. 2. Acetylene redution activity was more increased in a single inoculation of R. japonicum than those of the mixed inoculation of the R. japonicum and the A. lipoferum, in cases of Danyeup cultivar, regardless of the form of combined nitrogen used. 3. Nodule mass and total nitrogenase activity per plant showed the positively significant effect in the interrelationship between dry matter of soybean and some factors related to nitrogen fixation efficiency. 4. The highest symbiotic effect in Danyeup cultivar was obtained when a single R. japonicum 84 Dy-1 strain was inoculated and fertilized with 18 mM potassium nitrate.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.3
• /
• pp.289-295
• /
• 1988

An ordinary paddy variety Hwaseong and a high-yielding variety Samgang were taken under investigation to test the effect of top dressing of newly formulated three compound fertilizers on rice plants for at sprouting heads. The fertilizer formulate used were C. F. I (14-0-14; $NO_3-N$ and $NH_4-N$) and C. F. II (14-0-14; $NH_4-N$ only) and C. F. III (14-0-14 + OM 10%; $NO_3-N$ and $NH_4-N$). A field experiment was conducted on a plot of Gyuam series. The following results were obtained: 1. Effects of compound fertilizers at sprouting heads a. Hwaseong variety exhibited 5-10% yielding increases on the plots with application of 2nd compound fertilizer (I) and (II) compared to straight fertilizer of (I) and (III). Fertilization with 2nd and 3rd compound fertilizers gave the best result when they are done 15 days before heading. A yield increase of 3-5% was achieved when the fertilization was done 20 days before heading in the case of Samgang variety, but no beneficial effect was observed with an application 10 days before heading. b. Rate of barren grains was at the minimum in the compound fertilizer (II) plots of both Hwaseong and Samgang varieties. c. Content of $NO_3-N$ in soils and grain yield appeared to be positively correlated($r=0.618^*$) 2. Effects of heading fertilizers on artificially reduced conditions of soil a. No significant difference in Eh values were measured among reduced paddy soils. The compound fertilizer of (II) presented the best result in yield increases regardless of rice variety. b. Rate of barren grains in both varieties was observed at the minimum on the application of compound fertilizer of (II). c. No great difference of mineral contents was detected among plants from different treatments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.93-103
• /
• 1981

It is well-known that nowadays heat resisting and anti-corrosive materials have been widely used as the components materials of gas turbines, nuclear power plants and engines etc. In the fields of machine production industry. And materials for engine components, like as the exhaust valve of internal combustion engine, have been required to operate under the high temperature range of $700^{\circ}C$-$800^{\circ}C$ and high pressured gas with repeated mechanical load for the high performance of engines. For these components, friction welding for bonding of dissimilar steels can be applied for in order to obtain process shortening, production cost reduction and excellent bonding quality. And age hardening recently has been noticed to the heat resisting materials for further strengthening of high temperature strength, especially high temperature fatigue strength. However, it is difficult to find out any report concerning the effects of age hardening for strengthening high temperature fatigue strength to the Friction welded heat resisting and anti-corrosive materials. In this study the experiment was carried out as the high temperature rotary bending fatigue testing under the condition of $700^{\circ}C$ high temperature to the friction welded domestic heat resisting steels, SUH3-SUS303, which were 10hr., 100hr. aging heat treated at $700^{\circ}C$ after solution treatment 1hr. at $1, 060^{\circ}C$ for the purpose of observing the effects of the high temperature fatigue strength and fatigue fracture behaviors as well as with various mechanical properties of welded joints. The results obtained are summarized as follows: 1) Through mechanical tests and micro-structural examinations, the determined optimum welding conditions, rotating speed 2420 rpm, heating pressure 8kg/mm super(2), upsetting pressure 22kg/mm super(2), the amount of total upset 7mm (heating time 3 sec and upsetting time 2 sec) were satisfied. 2) The solution treated material SUH 3, SUS 303, have the highest inclination gradient on S-N curve due to the high temperature fatigue testing for long time at $700^{\circ}C$. 3) The optimum aging time of friction welded SUH3-SUS 303, has been recognized near the 10hr. at $700^{\circ}C$ after the solution treatment of 1hr. at $1, 060^{\circ}C$. 4) The high temperature fatigue limits of aging treated materials were compared with those of raw material according to the extender of aging time, on 10hr. aging, fatigue limits were increased by SUH 3 75.4%, SUS 303 28.5%, friction welded joints SUH 3-SUS 303 44.2% and 100hr. aging the rates were 64.9%, 30.4% and 36.6% respectively. 5) The fatigue fractures occurred at the side of the base matal SUS303 of the friction welded joints SUH 3-SUS 303 and it is difficult to find out fractures at the friction welding interfaces. 6) The cracking mode of SUS 303, SUH 3-303 is intergranular in any case, but SUH 3 is fractured by transgranular cracking.

• Korean journal of food and cookery science
• /
• v.12 no.2
• /
• pp.186-192
• /
• 1996

Retrogradation of non-waxy rice (NWR) and waxy rice (WR) cakes (45% moisture) stored at 5$^{\circ}C$, $25^{\circ}C$ and -2$0^{\circ}C$ was studied by differential scanning calorimetry (DSC) and enzymatic ($\beta$-amylase-puuulanase) method. With DSC, endotherms did not appear with rice cakes stored at room ($25^{\circ}C$) and deep freezing (-2$0^{\circ}C$) temperatures but did with samples stored at low temperature (5$^{\circ}C$), showing accelerated retrogradation by low temperature. Onset temperature (To) and peak temperature (Tp) did not change under 14 days at 5$^{\circ}C$ but enthalpy values ($\Delta$H) increased rapidly within one day and increased steadily until 5th day of storage, then equilibrated. Higher $\Delta$H were obtained with WR cakes than NWR cakes. It was suggested that more amylopectin recrystallization occured with WR than NWR. Degrees of gelatinization of rice cakes determined by enzymatic method increased in the following order: 5$^{\circ}C$ < $25^{\circ}C$ < -2$0^{\circ}C$. In contrast with DSC results, dogrees of gelatinization of NWR cakes, were relatively lower than that of WR cakes. However, increased retrogradation extents (melting enthalpies) caused reduced enzyme susceptibilities to $\beta$-amylase-pullulanase system, among NWR or WR cakes stored at 5$^{\circ}C$. The degrees of retrogradation of rice cakes stored at 5$^{\circ}C$ were higher than those stored at $25^{\circ}C$ and -2$0^{\circ}C$ without regard to the kind of rice. The higher sensitivity of the enzymatic method was obtained than that of DSC method when the degrees of retrogradation of rice cakes were determined during storage under this experiment conditions.

• Journal of Korean Society of Forest Science
• /
• v.7 no.1
• /
• pp.8-18
• /
• 1968

This experiment is a comparative study of influence on the seedling in individual pH treatment of culture soil I. T-R ratio and growth 1. T-R ratio has almost similar tendency in its range according to tree species, but in individual treatment there were lots of differences. In the strong acidic and the strong alkali conditions T-R ratio was small. This means the seedling body is out of balance. 2. Where the resistance to H-ion was stronger, the growth of root-system, that is, the resistance of fine root was comparatively better. 3. The growth of root system was greatly influenced by pH, and in the condition of pH3, pH8, pH9, the growth was especially worse. 4. Ginkgo biloba, Pinus rigida and Pinus banksiana kept on growing in the strong acidic condition. 5. The growth season has higher pH of culture soil than the dormant season, and tree species which have strong resistance of acidic had better growth and had stronger resistance of draught in the acidic condition of culture soil ; especially, Pinus rigida and Pinus banksiana were worse in the alkali condition. II Seedling pH 1. According to the tree species, there were differences in seedling pH, and tree species, considred to be strong in resistance of draught, had been high in seedling pH. 2. Seedling pH of the growth season was higher than that of the dormant season. 3. Seedling pH was not significant in pH treatment of the culture soil.

• Korean Journal of Breeding Science
• /
• v.43 no.3
• /
• pp.184-189
• /
• 2011

'Younghan' (Hordeum vulgare L.), a winter barley for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute of Crop Science, Rural Development Administration in 2008. It was derived from a cross between $F_1$['YB3433-3B-5'/'YB3135-3B-2-3'] and 'YB3135-3B-2-3'. 'SB971305-B-B-B-4-4' line was selected for its earliness, resistance to disease and good agronomic characteristics. The promising line showed both high yield and lodging resistance in the yield trials in Iksan in 2004 to 2005, and designated as 'Iksan420'. The line was subsequently evaluated for winter hardiness, earliness, and yield at eight locations throughout Korea for two years from 2007 to 2008 and finally named as 'Younghan'. It has the growth habit of IV, erect plant type, green leaf and thick culm in diameter. Its heading date was April 24, and the maturing date was May 25 in paddy field conditions, which were one day earlier than those of the check cultivar 'Youngyang'. The cultivar 'Younghan' had better winter hardiness, and resistance to lodging and BaYMV than those of the check cultivar did. The average forage dry matter yield of 'Younghan' was approximately 12.0 MT/ha in adapted region. 'Younghan' also showed 8.5% of crude protein content, 27.2% of ADF, and 67.1% of TDN, including higher grade of silage quality for whole crop barley. This cultivar would be suitable for (area with daily minimum temperature in January) above $-8^{\circ}C$ in Korean peninsula.

• Asian Journal of Turfgrass Science
• /
• v.20 no.2
• /
• pp.147-156
• /
• 2006

This study was initiated to evaluate the growth characteristics of seven creeping bentgrass cultivars in summer, 'Penncross' showed the worst visual quality, whereas 'Penn A-4' and 'Crenshaw' the best quality. 'Putter', which was maintained a fair quality during the test period, was regarded as a good cultivar because of no significant variation in summer as compared to the other caltivars. 'Crenshaw',' L-93' and 'Penn A-4' were greater in chlorophyll content and 'Penncross' lowest during the summer. Also, 'SR1020' had a low content of chlorophyll. 'Putter' greatly increased in chlorophyll content after fertilization. The highest shoot density($19.3/cm^2$) was found with 'L-93' in early August, followed by 'Crenshaw', 'Penn A-4', 'Putter', 'Dominant', and 'SR1020' in that order. However, 'Penncross' was lowest($15.7/cm^2$). As for a root length, 'L-93' was longest, being over an average 5.5cm. 'Penn A-4' and 'Putter' also showed good result in root growth. However, the root length considerably decreased with 'SR1020', 'Penncross' and 'Dominant' in summer. Brown patch was a serious disease for the most cultivars, except 'Penncross'. 'Dominant' had the most serious damage. 'Putter', 'L-93', 'Crenshaw', 'SR1020', and 'Penn A-4' were also greater in damage over the others. In regards of algae occurrence in summer, 'Penn A-4' had the least damage, while 'Dominant' the greatest. In conclusion, 'Crenshaw', 'Penn A-4' and 'L-93' were the best cultivars in terms of summer growth. Conversely, 'Penncross' was the poorest one. However, this study was conducted under the conditions of one-year old green. Accordingly, in-depth experiment should be done over several years to elucidate the characteristics of growth for the wide range of creeping bentgrass cultivars during the summer.