• Title/Summary/Keyword: experiment conditions

Search Result 5,356, Processing Time 0.046 seconds

Changes of Soil Microbe communities in Plastic Film House by Green Manure Crops Cultivation

  • Won, J.G.;Jang, K.S.;Hwang, J.E.;Kwon, O.H.;Jeon, S.G.;Park, S.G.;Park, K.C.;Suh, Y.J.
    • Korean Journal of Organic Agriculture
    • /
    • v.19 no.spc
    • /
    • pp.149-152
    • /
    • 2011
  • To improve the soil condition for no-tillage organic pepper cultivation, four different green manure crops were cultivated. Fertilizer supply was depended on the biomass of the cultivated green manure crops, nitrogen supplies were 314kg in Vicia villosa and 341kg $ha^{-1}$ in Vicia angustifolia. In the microbial community analyzed by phospholipid fatty acid (PLFA) method, soil microbe populations were different among the green manure crops and fungi group was increased at Vicia angustifloia and Vicia villosa. The biological ratio indexes of fatty acids in the soils, the ratio of Gram-negative to Gram-positive bacterial PLFA and Ratio of aerobes to anaerobes were high at Vicia hirsute and Vicia tetrasperma suggesting the enrich of the aerobic conditions. The ratio of saturated to unsaturated fatty acids increased at Vicia angustifloia and Vicia villosa suggesting anaerobic conditions. Abundant biomass and uncomposted organic matter, the ratio of fungi to bacteria was increased at Vicia angustifloia and Vicia villosa.

Comparison of Seed Germinating Vigor, Early Germination Characteristics, Germination Speed and Germination Peak Time in New Varieties of The Third Generation of Creeping Bentgrass Under Different Growing Conditions (생육환경에 따른 제3세대 크리핑 벤트그래스 신품종의 종자 발아력, 초기 발아 특성, 발아세 및 발아 피크 기간 비교)

  • Kim, Kyoung-Nam;Jung, Ki-Wan
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.11 no.5
    • /
    • pp.79-91
    • /
    • 2008
  • Research was initiated to investigate germination characteristics of creeping bentgrass (CB, Agrostis palustris Huds.). Seven varieties of CB were evaluated with different experiments. An alternative environment condition requiring for a CB germination test by International Seed Testing Association (ISTA) was applied in the Experiment I, consisting of 8-hr light at $25^{\circ}C$ and 16-hr dark at $15^{\circ}C$(ISTA conditions). Experiment II was conducted under a room temperature condition of 5 to $25^{\circ}C$(natural conditions). In each experiment, data such as seed germinating vigor, early germination characteristics, germination speed and germination peak time were measured. Significant differences were observed in seed germinating vigor, early germination characteristics, germination speed and germination peak time. Seed germinating vigor was variable with different environments and varieties. It was 61.50 to 98.25% under ISTA conditions and 55.00 to 98.50% under natural conditions. There were considerable variations in early germination characteristics among CB varieties according to different conditions. Early germination characteristics indicated that all varieties were 1 to 4 days faster in germination under ISTA conditions, when compared with natural conditions. The germination speed, measured as days to seed germination of 70% and 90%, was much faster with Penn A-1, Penn A-4 and Penncross under ISTA conditions. But it was even faster with L-93 and Penncross when grown under natural conditions. Differences were also observed in germination peak time with varieties and growing conditions. It was 0.57 to 2.86 days under ISTA conditions and 0.74 to 1.74 days under natural conditions. Regardless of the environment conditions, the shortest variety was L-93 and the longest one T-1. Considering germinating vigor, early germination characteristics, germination speed and germination peak time, Penn A-1, Penn A-4 and Penncross were regarded as excellent varieties under ISTA conditions in terms of early establishment characteristics, while L-93, Penn A-1 and Penncross under natural conditions. These results suggest that an intensive germination test be needed prior to planting, for the early germinating vigor, germination speed and germination peak time. Also, a proper variety selection and comprehensive site analysis for the growing environmental conditions should be done before golf course construction.

멀티스팬 연속공정 시스템의 장력 특성에 관한 실험적 연구

  • 신기현;권순오;천성민
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1995.10a
    • /
    • pp.917-920
    • /
    • 1995
  • A mathematical model describing the relationship between longitudinal tension and tangential velocity of web/roller in a multi-span web transport system has been developed. An experiment was carried out for typical conditions to validate the mathematical model for tension behavior in a multispan system. A two-span prototype prototype web transport system with winder and unwinder was manufactured for the experiment. By comparing simulation and experimental results, the mathematical model for tension and velocity in a multi-span web transport system is confirmed to be valid for typical conditions. Tension transfer phenomenon was also confirmed though the simulation as well as experimentation.

  • PDF

Cultural Environments on Growth and Tuberlet Yield of Pinellia ternata(Thunb.) Breit (반하의 재배환경에 따른 생육 및 수량)

  • Kim, Young-Jin;Park, Moon-Soo;Park, Ho-Ki;Kim, Sun;Kim, Tai-Soo;Chang, Young-Sun
    • Korean Journal of Medicinal Crop Science
    • /
    • v.3 no.3
    • /
    • pp.240-245
    • /
    • 1995
  • This study was conducted to find out environment conditions in order to increase of growth and yield of tuberlets in pinellia ternata (Thunb.) Breit. The optimal temperature conditions for the growth of tuberlets were good rather temperature fluctuations than constant one and the optimal photoperiod was a 6hr-photoperiod. The growth of tuberlets to the kinds and concentration of growth regulators was good for 0. lppm 2.4- D, 10ppm kinetin and 50ppm gibberellin treatment. In colchicine soaking treatment, the growth of tuberlets was bad, but bulblets formation was good for 0. 05% colchicine treatment for 48hr. -soaking. In colchicine dropping treatment, dry tuber yield was good for 0. 1% colchicine treatment with once dropping for one day.

  • PDF

Optimization of a geometric form and cutting conditions of a metal slitting saw by experimental method (실험적 방법을 통한 Metal slitting saw의 형상 및 절삭 조건의 최적화)

  • 정경득;고태조;김희술
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2000.05a
    • /
    • pp.934-938
    • /
    • 2000
  • Built-up edge affects the surface integrity of the machined surface and tool wear. Tool geometry and cutting conditions are very important factors to remove BUE. In this paper, we optimized the geometry of the metal slitting saw .1nd cutting conditions to remove BUE by the experiment. In general, the metal slitting saw is plain milling cutter with thickness less of a 3/16 inch. This is used for cutting workpiece where high dimensional accuracy and surface finish are necessary. The experiment was planned with Taguchi method that is based on the orthogonal array of design factors(coating, rake angle, number of tooth, cutting speed, feed rate). Response table was made by the value of the surface roughness, the optimized tool geometry and cutting conditions through response table could be determined. In addition. the relative effect of factors were identified by the variance analysis. filially. coating and cutting speed turned out important factors.

  • PDF

A Study on Optimal Dye-coating Conditions to Reduce Dye-adsorption Time with Improved DSSC Efficiency

  • Seo, Yeong-Ho;Choe, Eun-Chang;Hong, Byeong-Yu
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.481.1-481.1
    • /
    • 2014
  • Dye-sensitized solar cell (DSSC) has been extensively investigated as the next generation energy source. Despite attractive features of simple fabrication process and its economical efficiency, there are some problems such as low efficiency and low long-term stability. Many groups have attempted the proposed way to improve the cell efficiency and long-term stability such as low recombination rate between $TiO_2$ surface and electrolyte, the development of new dye molecules capable of light adsorption as broadly as possible, the fabrication of a solid-state DSSC by replacing the liquid electrolyte, and protective coating on glass. In this work, we confirmed new dye-coating conditions to maximize the dye adsorption between the dye and $TiO_2$ nanoparticle surface. The experiment results coating conditions with the coating temperature of $70^{\circ}C$, the dye concentration of 10 mM and the coating time of 3 min. Conditions have two times, three times cycle the experiment in progress efficiency rises.

  • PDF

Factorial Experiment for Drum-type Secondary Separating Part of Self-propelled Pepper Harvester

  • Nam, Ju-Seok;Kang, Young-Sun;Kim, Su-Bin;Kim, Dae-Cheol
    • Journal of Biosystems Engineering
    • /
    • v.42 no.4
    • /
    • pp.242-250
    • /
    • 2017
  • Purpose: This study was conducted to determine the appropriate operating conditions through a factorial experiment for the secondary separating part of the self-propelled pepper harvester. Methods: An experimental setup that simulates the secondary separating part of the self-propelled pepper harvester was organized. Test samples were classified into three types according to the number of peppers on a stem, and 12 sets were prepared for each type. Among the operating conditions of the secondary separating part, the rotational speed of drum B (four levels), radial clearance between drums and cylindrical teeth (three levels), and speed ratio between the three drums (two levels) were set as the test factors, and tests were repeated three times for different levels of each factor. The appropriate operating conditions were determined by analyzing the separation ratio and damage ratio of the peppers collected through the secondary separating part. Results: The test factors changed the overall separation ratio and overall damage ratio in similar trends. In other words, the conditions that caused high overall separation ratios also exhibited high overall damage ratios. Owing to the high overall damage ratio in the condition with the highest overall separation ratio, the operating conditions should be selected considering both ratios. Conclusions: When the condition with more than 60% of overall separation ratio and less than 15% of overall damage ratio was considered as the appropriate operating condition, 70 rpm of the rotational speed of drum B, 5 mm of the radial clearance between drums and cylindrical teeth, and 7:3:5 for the speed ratio of the three drums A, B, and C should be applied for the secondary separating part used in this study. Supplementary studies will be required in the future to find optimal operating conditions through the actual field test under further divided test factors.

Ion Optical Study on the $He^{++}$ Beam Transport System of the SNU 1.5-MV Tandem Van do Graaff Accelerator (SNU 1.5-MV 직렬형 반데그라프 가속기의 $He^{++}$ 빔 소송계에 대한 이온광학적 고찰)

  • Hyen-Cheol JO;Young-Dug BAE;Hae-iLL BAK
    • Nuclear Engineering and Technology
    • /
    • v.23 no.4
    • /
    • pp.426-437
    • /
    • 1991
  • The $He^{++}$ beam transport system of the SNU 1.5-MV Tandem Van de Graaff accelerator is analysed by ion optical approach. The program OPTRANS is developed to determine the optimum operating conditions of each ion optical component and to simulate ion beam transport. First order matrix formalism is used and the space charge effect is neglected. Optimum operating conditions for the transport of 0.5~3.0 MeV $He^{++}$ beam are determined by the use of the program OPTRANS. Initial ion beam omittance is assumed to be 0.5$\times$80.0 mm.mrad from the structure of the extraction electrode and the experiment of ion beam extraction. ion beam transport characteristics of each ion optical component according to the variation of the operating conditions are investigated, and operating conditions to minimize the beam size at each slit, stripping foil, and target are calculated. Optimum operating conditions obtained from the experiment of ion beam transport show a discrepancy of less than 15% compared with the calculated ones. From the simulation and experiment of ion beam trans-port, the validity of the calculated optimum operating conditions and the usefulness of the program OPTRANS are verified.

  • PDF