• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.1
• /
• pp.22-32
• /
• 2008

This paper proposes a linearization technique for the 3-level NPC type inverter, which increases the linear control range of Inverter up to the one-pulse inverter. The overmodulation range is divided into two modes depending on the Modulation Index, MI. In overmodulation region I, the reference angles are derived from the fourier series expansion of the reference voltage corresponding to the MI. In overmodulation region II, the holding angles are also derived in the same way. Therefore, it is possible to obtain the linear control and the maximized utilization of PWM inverter output voltage.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1062-1066
• /
• 2004

In this study, refrigerant noise at connection of capillary tube and evaporator is investigated. Mechanism of refrigerant noise generation is examined in side-by-side type home refrigerator with two evaporators. It is found that the refrigerant noise is generated during refrigeration room fan-off (R-fan of) for that type refrigerator. The reason is that mass flow rate gets down during R-fan of and flow pattern is changed at outlet of capillary tube. We suggest designs for reduction of refrigerant noise with horizontal double expansion device, muffler, and accumulator. To evaluate those improved designs, sound quality index is used.

• Asian Journal of Innovation and Policy
• /
• v.12 no.3
• /
• pp.323-344
• /
• 2023

This study investigates the resilient structural characteristics of a region by assessing the impact of the financial crisis. Utilizing panel data at the prefecture level for metropolitan cities across pre-shock (2006-2008), shock (2009), and post-shock (2010-2019) periods, we calculated an employment resilience index by combining the resistance and recovery indices. The panel logit regression measures the influences of the region's industrial structure and external economic factors in response to the global financial crisis. The results revealed that the diversity index of industries contributed to the post-shock recovery bounce-back. Additionally, the presence of large firms and industrial clusters within the region positively contributed to economic resilience. The specialization and the proportion of manufacturing industries showed negative effects, suggesting that regions overly reliant on manufacturing-centered specialization might be vulnerable to external shocks. Furthermore, excessive capital outflows for market expansion were found to have a detrimental impact on regional economic recovery.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.321-321
• /
• 2008

To obtaingood resolution in PDP, one of the important factors is to achieve the accuracy of barrier ribs. The photolithographic process can be used to form patterns of barrier rib with high accuracy and a high aspect ratio. The composition for photolithography is based on the $B_2O_3-SiO_2-Al_2O_3$ glass system including additives such as alkali oxides and alkali earth oxides. The refractive index and thermal properties in glass system are changed by amount of alkali oxides and alkali earth oxides. Therefore, it is important that additives are controlled to have proper refractive index and thermal properties. The additives are contributed to non-bridging oxygen within the glass network, causing a change of density. In addition to a change of the structural cross-link density, the refractive index, dielectric and thermal properties glass are correlated with ionic radius and polarizability of cations. In this study, we investigated the refractive index and the thermal properties such as glass transition temperature, glass softening temperature and coefficient of thermal expansion by changing composition in the $B_2O_3-SiO_2-Al_2O_3$ glass system.

• Land and Housing Review
• /
• v.11 no.3
• /
• pp.11-19
• /
• 2020

This study aims to examine the relationship between the improvement of the income distribution index from the late 1980s to the 1990s and large-scale housing supply projects such as the 2 million housing construction project. Looking at Korea's economic development in terms of income growth and distribution, GDP has continuously increased since the establishment of the government, especially in the late 1980s. The Gini Index, a representative income inequality index, rapidly deteriorated in the early 1970s, and gradually improved from the late 1980s. The 2 million housing construction project, announced in 1988, supplied a third of the existing nationwide housing stock of 6.5 million units in three years. The project cost was 65 trillion won, equivalent to 50% of Korea's GDP at the time. This study questioned whether the ratio of the number of employed workers in the construction industry was a variable directly affecting the Gini Index. To verify this, the causal relationship between the proportion of employed workers in the construction and manufacturing industries and the Gini Index from 1979 to 2008 was statistically analyzed. For this, the ARIMA model was established for each variable, and the correlation of their residuals was verified. The 2 million housing construction project had the effect of improving income inequality in terms of rising wages for production workers and creating jobs for the low-educated and low-income class. During the project period, the number of middle-income earners increased sharply, and the income gap between the high-income and low-income earners greatly decreased. The expansion of the construction volume can be used as a powerful and direct policy tool for improving income distribution. However, the effect may be limited. When the proportion of workers exceeds the threshold, the effect is weakened.

• Korean Journal of Animal Reproduction
• /
• v.21 no.4
• /
• pp.355-362
• /
• 1997

This study was undertaken in an effort to product embryos through in vitro maturation(IVM), in vitro fertilization(IVF) and in vitro culture(IVC) after cryopreservation of immature and mature porcine oocytes. The experiments were conducted to investigate IVM rate of oocytes frozen with 3 different cryoprotectants and to examine IVF and IVC of frozen-thawed oocytes. The CEI(cumulus cells expansion index) after IVM of frozen-thawed immature oocytes was higher in oocytes frozen with PG＋PEG(propylene glycol plus polyethylene glycol) than those frozen with single cryoprotectant and this index was almost 90% of unfrozen oocyte's index(2.39 vs. 2.66). The IVF rate of all frozen oocytes was very low(68% of unfrozen oocytes) and the IVF rate of frozen immature oocytes was slightly higher than that of frozen mature oocytes(39.0% vs. 34.4%), but polyspermic penetration was higher in frozen immature oocytes(21.9% vs. 19.1%). The cleavage rate after IVF of frozen-thawed oocytes was 9.3% for frozen mature oocytes and 11.3% for frozen immature oocytes and this rate was significantly lower(P<0.05) than that of control(60.7%). The development to 8-cell stage was greatly lower in frozen mature oocytes than in frozen immature oocytes. The results indicate that the use of PG plus PEG as cryoprotectant may be very effective for vitrification of porcine oocytes and the frozen-thawed immature porcine oocytes can be used fro in vitro embryo production based on IVM, IVF and IVC system.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.235-239
• /
• 2004

Sound transmission either as airborne or structure borne is a potential problem that occurs in buildings either from sources within or from outside. With the expansion of real estate activities in countries like India, the need to attend sound insulation requirements also assumes greater dimensions. The focus of this research is on studying the sound transmission characteristics of building structures made of hollow blocks, neocrete block, aerocon block and prefabricated panels such as Ferrocement panel. The tests were carried out the blocks with and without plastering and their sound reduction index was measured at one-third octave frequencies. In the case of ferrocement panels, different types of systems were tested in the TL suite. Panels with cavity, with cavity ties, with insulation, with stiffeners and with plasterboard were investigated. Sound reduction index of these panels was measured with additional quantities like longitudinal wavespeed, and loss factors (internal and total loss factor). Tests were also conducted on Cypcrete wall panel and Sandwiched wooden panel in a similar way. Theoretical investigations were carried out using Statistical Energy Analysis (SEA) for the above systems. Sound reduction index was then compared between the predicted and the measured values.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.5
• /
• pp.359-366
• /
• 2013

In the lower arm design process, a tolerance optimization of the variance of design variables should be preceded before manufacturing process, since it is very cost-effective compared to a strict management of tolerance of products. In this study, a design of experiment (DOE) based on response surface model (RSM) was carried out to find optimized design variables of the lower arm, which can meet a given requirement of probability constraint for the process capability index (Cpk) of the weight and maximum stress. Then, the design space was explored by using the central composite design method, in which the 2nd order Taylor expansion was applied to predict a standard deviation of the responses. The optimal solutions satisfying the probability constraint of the Cpk were found by considering both of the mean value and the standard deviation of the design variables.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.35-44
• /
• 2015

Purpose - To accelerate economic cooperation, this study investigates trade structures of Korea and the United States and identifies trade discrepancies. Such discoveries can lead to increases in trade volume by improving policies, eventually uncovering ways for trade expansion. Research design, data, and methodology - The Index of trade intensity, from trade intensity theory, is used to analyze the trade decision factors. Even though specific factors should materialize in the analysis, realistically, concrete explanations are difficult as there are so many unsolved factors and diversifications. Results - First, the Index of A value/ B value positions Korean against the United States in terms of market share and Korea against world market share, which thereby reveals comparative market intensity. Second, Korea is taking comparative advantage of export specialization. Third, real comparative advantage indices are considerably improved since early 2000. Conclusions - This study uses quantitative measurements and trade intensity theory and trade specialization to come up with a comparative advantage index to see how inter-trade relations between Korea and the United States have changed over the past 10 years.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.1
• /
• pp.41-48
• /
• 2017

In this study, we proposed GIS-based Regional Crime Prevention Index (RCPI) development method designed to support local governments with systematic crime prevention activities. The public interest in safe urban environment is increasing rapidly. The government is putting efforts into crime prevention activities to eliminate the criminal opportunities in advance. CPTED is method to prevent crimes in the city by improving environmental factors that cause crime. It is used by local governments to promote the crime prevention activities centering on the expansion of CCTVs and street lamps and the improvement of street environment. However, most policies were terminated as one-off programs and it is necessary to monitor the effect of such policies on a continuous basis. In order to alleviate issues, this study proposed RCPI as part of crime safety assessment in urban environments. The estimation of RCPI in City A of Gyeonggi-do showed relative differences in 31 districts (dong), indicating that it is also possible to evaluate the crime safety in the local community on the level of the administrative dong, the smallest administrative district in the urban environments. As a crime map, the RCPI will be used effectively as he reference to support the decision making process for local government in the future.