• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.1 s.113
• /
• pp.54-61
• /
• 2006

Basically corrugated board is composed of three layers of different basis weight and stock composition. Warp is well-known for one of the most important problems of corrugated board production. Warp is caused by difference of hygro-expansibility of linears between top and bottom. This research was performed to evaluate the effect of paper properties on the warp of corrugated board. To evaluate warp, dynamic expansion properties of paper was tested using DPM(dynamic penetration measuring system). The effects of sizing, stock composition and wet-pressing on dynamic expansion properties were also evaluated. Commercial base papers showed different dynamic expansion property depending on stock composition and papermaking operation. Sizing treatment decreased and wet-pressing increased the amount of dynamic expansion. To reduce warp of corrugated board, management of dynamic expansion of base papers should be controlled by manipulating moisture, heat and tension, using a variety of adjustments available on the corrugator.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.6
• /
• pp.1319-1326
• /
• 2015

The symmetric key encryption algorithms, such as the AES or the ARIA, generate round keys by the key expansion mechanism. While the algorithm is executed, key expansion mechanism emits information about the secret key by the power consumption. The vulnerability exists that can reduce significantly the candidate of the secret key by the simple power analysis attack using a small number of the power traces. Therefore, we'll have to study about the attack and the countermeasure to prevent information leakage. While a simple power analysis attack on the AES key expansion has been studied since 2002, ARIA is insufficient. This paper presents a simple power analysis attack on 8-bit implementations of the ARIA-128 key expansion. The presented attack efficiently utilizes this information leakage to substantially reduce the key space that needs to be considered in a brute-force search for the secret key. We show that ARIA is vulnerable to a SPA attack based on hamming weight leakage.

• The Korean Journal of Ecology
• /
• v.17 no.1
• /
• pp.37-47
• /
• 1994

A study was conducted to examine the leaf expansion forms and to analyze the leaf growth in early growing season of 1992 in a temperate deciduous forest in central region of Korea. After the winter bud scale fell off, the expansion forms of 11 woody species were divided into 3 groups, spreading fan form, opening form from half folding, and unrolling form from main vein. The ratios of leaf area at the end of growing season to that of leaf expantion time varied among species, and were related closely to expansion forms. The leaves reached to full size between the third ten days of April and the middle ten days of May, except for a few species. Leaf weight, however, increased steadily during the growing season. Specific leaf area (SLA) increased rapidly for 10-20 days after leaf expansion and decreased rapidly for 10 days after reaching maximum values, and thereafter decreased slowly. The SLA values of trees were smaller than $200cm^2/g$, but those of subtree and shrub were larger than $200cm^2/g$.

• The Korean Journal of Applied Statistics
• /
• v.20 no.2
• /
• pp.281-290
• /
• 2007

Linear estimator, a weighted sum of the sample observation, is commonly adopted to estimate the finite population parameters such as population totals in survey sampling. The weight for a sampled unit is often constructed by multiplying the base weight, which is the inverse of the first-order inclusion probability, by an adjustment term that takes into account of the auxiliary information obtained throughout the population. The linear estimator using the weight adjustment is often more efficient than the one using only the bare weight, but its valiance estimation is more complicated. We discuss variance estimation for a general class of weight-adjusted estimator. By identifying that the weight-adjusted estimator can be viewed as a function of estimated nuisance parameters, where the nuisance parameters were used to incorporate the auxiliary information, we derive a linearization of the weight-adjusted estimator using a Taylor expansion. The method proposed here is quite general and can be applied to wide class of the weight-adjusted estimators. Some examples and results from a simulation study are presented.

• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.101-111
• /
• 1999

Compared with the BF slag, the EAF slag has expansion due to the reaction with water and free CaO. Therefore it is specified in Concrete Specification that the FAP slag aggregated must not be used in concrete. Because of this reason it is unusual to use the EAF slag aggregate in concrete. The EAF slag aggregate treated with accelerated and water aging was comparatively satisfied with fundamental properties, which are specific gravity, unit weight, abrasion and immersion expansion ratio, as concrete aggregate. Therefore when we measured the compressive strength till 28 days, we found that the mortar and concrete replacing the natural aggregate with the EAF slag aggregate by 4 steps had better results than the concrete using the natural aggregate in a view of the compressive strength. But at 91 days, concrete using the EAF slag aggregate had no difference with it using the natural aggregate.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.293-294
• /
• 2010

In this study, it was analyzed that autogenous expansion of MgO concrete was affected by W/B and curing temperature. Autogenous expansion test was performed for MgO concrete, which is mixed MgO of 0%, 5% of cement weight. With autogenous expansion based on long-term time variation was measured, it was observed an influence with W/B and curing temperature.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.1
• /
• pp.25-34
• /
• 2023

This paper presents a computational fluid dynamics (CFD) analysis to investiagate the effect of expansion chamber on overpressure reduction in protective tunnels subjected to detonation of high explosives. A commercial CFD code, Viper::Blast, was used to model the blast waves in a protective tunnel with a length of 160 m, width of 8.9 m and height of 7.2 m. Blast scenarios and simulation matrix were establihsed in consideration of the design parameters of expansion chamber, including the chamber lengths of 6.1 m to 12.1 m, widths of 10.7 m to 97 m, length to width ratios of 0.0 to 5.0, heights of 8.0 m and 14.9 m, and ratios of chamber to tunnel width of 1.2 to 10.9 m. A charge weight of TNT of 1000 kg was used. The mesh sizes of the numerical model of the protective tunnel were determined based on a mesh convergence study. A parametric study based on the simulation matrix was performed using the proposed CFD tunnel model and the optimized shape of expansion chamber of the considered tunnel was then proposed based on the numerical results. Design recommendations for the use of expansion chamber in protective tunnel under blast loads to reduce the internal overpressures were finally provided.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.2
• /
• pp.305-316
• /
• 1997

A more efficient method for obtaining the fatigue life enhancement of a structure member with fastener holes is described. It is based on the combined process of cold-expansion and ring-indentation. Residual stresses were induced onto premachined holes using ring-indentation process near the fastener hole combined with cold-expansion. And residual stresses at the vicinity of a hole were evaluated using a fracture mechanics approach. The compressive residual stresses were larger using the combined process than is in the case of simple cold-expansion. Fatigue testing of aluminum specimens showed that the fatigue crack growth retardation emanating from a circular hole was greater for the combined process than for a simple cold-expansion alone.

• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.561-566
• /
• 2000

Recently, the hydroforming technology has been recognized as a general technique in manufacturing industry, especially in automotive industry. Hydroforming is applied to increase strength, and to decrease weight, cost and parts. Hydroforming is based on the inflation of, for Instance, a tube, coupled with axial or radial compression and by subsequent expansion and sizing against the die wall. Expansion, axial feeding, calibration are important parameters in this process. In this paper, the effects of various parameters such as internal pressure, axial feeding and friction on hydroforming of automotive bumper rail have been considered.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.143-146
• /
• 1999

This study is intended to investigate the properties of expansion of concrete under various curing environment with expansive additives. In construction field, expansive additives, which are anaiable to prevent from the diverse cracks caused by drying shrinkage are not expected to accomplish the expantion we expected because of both the absence of the know ledge change, loss of weight and dynamic of elasticty under various unit contents of expansive additives and curing condtion.