• 자원ㆍ환경경제연구
• /
• 제18권1호
• /
• pp.1-22
• /
• 2009

ITQ 제도의 목적은 어업에 투자된 과도한 자본을 줄여 어자원의 남획을 막는데 있다. 그 동안 ITQ 제도는 가장 비용 효율적이지 못한 어선들부터 자신들의 쿼터를 처분함으로써 스스로 시장에서 퇴출하도록 하는 효과를 가져올 것으로 믿어져 왔다. 그러나 본 논문은 실물옵션 기법을 도입, 퇴출 비용에 비가역성이 존재할 경우 덜 비용 비효율적인 어선들이 먼저 퇴출 결정을 내릴 수도 있다는 것을 보여준다. 즉, 퇴출에 따르는 비용이 비용 비효율적인 정도에 비례하고 비가역적인 성격을 갖는다고 할 때, 퇴출에 지연 동기가 발생한다는 점을 반영하여, 오히려 자본이 과도하게 투자된 어선 보다 그렇지 않은 어선이 먼저 퇴출하게 될 수도 있다는 것을 보여준다. 마지막으로 본 논문이 현실적으로 제공하는 정책적인 함의 또한 기술하였다.

• 한국중재학회지:중재연구
• /
• 제31권4호
• /
• pp.99-117
• /
• 2021

In this study, the effect of reducing and increasing factors in relationship conflict on the relationship exit between auto parts suppliers and buyers was analyzed based on transaction cost theory and relational exchange theory. As a result of the hypothesis test, Hypothesis 1, which states that relationship commitment will hurt relationship exit, and Hypothesis 3 that replacement will harm relationship exit were supported. In addition, Hypothesis 2 which states that transaction-specific investment will positively affect relationship exit was not supported. The theoretical and practical implications of this study are as follows. This study has identified the antecedents of relationship exit by comprehensively applying the transaction cost theory and relational exchange theory. In addition, this study can identify what a company should manage specifically to lower conflict and relationship exit by identifying the antecedents of relationship exit. The limitations of this study and the directions for future studies are as follows. First, not all of the antecedents of relationship exits between auto parts suppliers and buyers have been extensively investigated in the viewpoint of the transaction cost theory and relational exchange theory. In the future, it is necessary to identify additional factors. Second, the study was conducted only from the supplier's viewpoint. In future studies, it is expected that more accurate research results can be obtained by simultaneously examining the supplier's point of view and the buyer's point of view.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.55-62
• /
• 2002

A burr has been defined as undesirable projection of material formed as the result of plastic flow from a cutting or shearing operation. It is unavoidable in all kinds of machining operation. As a result, burr makes troubles on manufacturing process due to deburring cost, quality of products and productivity. In face milling operation, burrs are formed along five edges on the workpiece. In this study, the primary interest is about exit burr The influence of the cutting parameters on the formation of exit burrs in face milling will be described experimentally. Using the results of experimental study, burr types are classified according to appearance and formation mechanism in exit burr. The burr formation mechanism in each type of burr is suggested. Data bases are developed to predict burr formation result.

• 한국의료질향상학회지
• /
• 제25권2호
• /
• pp.44-55
• /
• 2019

Purpose: To investigate whether changes in Medical Aid (MA) status are associated with unmet need and catastrophic health expenditure (CHE). Methods: Data from the 2010 to 2014 Korea Health Panel (KHP) were used. The impact of changes in annual MA status ('MA to MA,' 'MA to MA Exit,' 'MA Exit to MA,' and 'MA Exit to MA Exit') on unmet need (all-cause and financial) and CHE (10% and 40% of household capacity to pay) were examined using the generalized estimating equation (GEE) model. Analysis was conducted separately for MA type I and II individuals. Results: In 1,164 Medical Aid type I individuals, compared to the 'MA to MA' group, the 'MA to MA Exit' group had increased likelihoods of all-cause and financial unmet need. This group also showed higher likelihoods of CHE at the 10% standard. The 'MA Exit to MA Exit' group showed increased likelihoods at the 10% and 40% CHE standards. In 852 type II recipients, the 'MA to MA Exit' group had higher likelihoods of CHE at the 10% standard. Conclusions: Type 1 MA exit beneficiaries had higher likelihoods of all-cause and financial unmet need, along CHE at the 10% standard. Type I 'MA Exit to MA Exit' beneficiaries also showed higher likelihoods of CHE at the 10% and 40% standards. In type II recipients, MA exit beneficiaries had higher likelihoods of CHE at the 10% standard. The results infer the importance of monitoring MA exit beneficiaries as they may be vulnerable to unmet need and CHE.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1816-1819
• /
• 2003

As a result of milling operation, we expect to have burr at the outward edge of workpiece. Also, it causes undesirable problems such as deburring cost, low quality of machined surface, and bottleneck in manufacturing process. Though it is impossible to totally remove burr in machining, it is necessary to plan a machining process that minimizes the occurrence of burr. In this paper, a scheme is proposed which identifies the tool path of the milling operation with minimum burr. In the previous research, a Burr Expert System was developed where the feature identification, the cutting condition identification, and the analysis on exit burr formation are the key steps in the program. The Burr Expert System predicts which portion of workpiece would have the exit burr in advance so that we can calculate the burr length of each milling operation. Here, the critical angle determines whether the burr analyzed is an exit burr or not. So the burr minimization scheme becomes to minimize the burr with critical angle. By iterating all the possible tool paths in certain milling operation, we can identify the tool path with minimum burr.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.810-813
• /
• 2000

Burr makes trobles on manufacturing process due to deburring cost, quality of products and productivity. This paper described the results of experimental study on the influence of the cutting parameters on the formation of exit burrs in face milling. The cutting parameters were investigated changing exit angle, rake nagle , lead angle in tool geometry as well as feed per tooth. Also we carried out experimets on several materials. Using the result of experimental study, burr types are classified according to appearance and formation mechanism in exit burr and we are considered the burr formation in each type of burr.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.717-720
• /
• 2000

Burr makes troubles on manufacturing process due to of deburring cost, quality of products and automation. This paper described the results of experimental study on the influence of the cutting parameters on the formation of exit burrs in face milling. Using the results of experimental study, we classified the burr type and developed data bases to predict burr formation result. This program will be used to predict burr type and geometry at a specified location. Simulation results on deformation strain and temperature are also available. Also algorithm which calculate the exit angle is proposed.

• 한국CDE학회논문집
• /
• 제6권4호
• /
• pp.222-228
• /
• 2001

In the milling operation, the burr can be generated on the intersection of cutting tool and workpiece. Due to burr formation, we expect lower efficiency in the operation and the cost increase. In order to understand the burr formation mechanism in the milling operation on the arbitrary feature, we developed an algorithm to analyse and predict the exit burr formation mechanism. Firstly, the recognition of arbitrary shaped workpiece was done through the CAD data. This data includes point information on the vertices of the workpiece. Secondly, tile CAM data regarding tool geometry, tool path, cutting speed, and material data are retrieved to simulate the actual cutting process. Thirdly, we predict the exit burr formation on the edge of workpiece based on the geometric analysis. Lastly, an algorithm implemented in the Windows environment to visualize the burr formation simulation. With this information, we can predict which portion of workpiece would have the exit burr in advance so that we call manage to find a way to minimize the edit burr formation in the actual cutting.

• 한국화재소방학회논문지
• /
• 제16권2호
• /
• pp.1-7
• /
• 2002

유도등은 일정한 조도를 가지고 상용전원에 의하여 항상 점등되어 있어야 함으로 전력소비 및 광원 교체등 경제적 손실과 관리상의 문제가 있게 된다. 본 논문은 이제까지 광원으로 사용하고 있던 형광등이나 백열전구 대신에 소비전력이 적은 고효율 발광다이오드를 사용하여 전력소비의 절감과, 점검시의 문제점을 개선하기 위해 원격제어가 가능한 새로운 유도등회로를 제안하고 실험한 것이다. 그 결과 원격제어 스위치에 의한 유도등 점검을 제어각의 범위에서 쉽게 제어할 수 있었으며 반응시간은 600〔$\mu$s〕로 매우 빠르게 동작하였다. 또한 출력 상승시간(Rise time)과 하강고시간(Fall time)은 최대 200〔ns〕로 예민하게 반응하였다. 광원으로 고효율 발광다이오드를 사용함으로 광원을 교체해야 하는등의 문제를 제거하였으며 전력소비를 감소시킬 수 있음을 확인하였다.

• International journal of advanced smart convergence
• /
• 제6권1호
• /
• pp.76-81
• /
• 2017

This paper presents a low cost and flexible IoT enabled smart LED controller using Arduino that is used for emergency exit signs. The Internet of Things (IoT) is become a global network that put together physical objects using network communications for the purpose of inter-communication of devices, access information on internet, interaction with users as well as permanent connected environment. A crucial point in this paper, is underlined on the potential key points of applying the Arduino platform as low cost, easy to use microcontroller with combination of various sensors applied in IoT technology to facilitate and establishment of intelligent products. To demonstrate the feasibility and effectiveness of the system, devices such as LED strip, combination of various sensors, Arduino, power plug and ZigBee module have been integrated to setup smart emergency exit sign system. The general concept of the proposed system design discussed in this paper is all about the combination of various sensor such as smoke detector sensor, humidity, temperature sensor, glass break sensors as well as camera sensor that are connected to the main controller (Arduino) for the purpose of communicating with LED exit signs displayer and dedicated PC monitors from integrated system monitoring (controller room) through gateway devices using Zig bee module. A critical appraisal of the approach in the area concludes the paper.