• 한국지반환경공학회 논문집
• /
• 제18권2호
• /
• pp.5-19
• /
• 2017

국내 건축물 시공을 위한 지하 굴착은 안정성, 경제성 및 굴착 주변 여건 등을 고려하여 재래식 버팀대 공법(Strut, Ground Anchor)에서 점차 Top-Down 공법을 개량한 내부 영구 지지체 공법으로 변화하고 있다. 본 연구에서는 국내에서 범용적으로 사용되고 Top-Down 공법, New Top-Down 공법, S.P.S 공법, S.T.D 공법 및 B.R.D 공법 등 내부 영구 지지체 공법 현장을 선정하여 재래식 버팀대 공법과 공사비 및 공기를 비교 분석하였다. 또한 공사 중 흙막이 벽체의 계측 자료를 분석하여 흙막이 벽체의 안정성을 확인하였다. 그 결과 깊은 굴착 및 기반암층이 지표면으로부터 가까운 경우 영구 지지체 공법이 재래식 버팀대 공법보다 경제성과 시공성이 우수함을 알 수 있었다

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.87-92
• /
• 2000

In excavation of tunnels especially located in shallow depth, it is not rare to meet geological change in excavation progress worse than expected in the initial design stage. This paper present a case study on the re-design of excavation and support system of a shallow tunnel under construction where it meets the unexpected bad geological condition during excavation. The detailed geological investigation shows that the rock mass is heavily weathered and fractured with RMR value less than 20. Considering this geological condition, the design concept is focused on the reinforcement of the ground preceding the excavation of tunnel. Two design patterns, LW-grouting & forepoling with pilot tunnelling method and the steel pipe reinforced grouting method, are suggested. Numerical analysis by FLAC shows that these two patterns give the tunnel and roof ground stable in excavation process while the original design causes severe failure zone around the tunnel and floor heaving. In point of the mechanical stability and the degree of construction, the steel pipe reinforced grouting technique proved to be good for the reinforcement of heavily fractured rock mass in tunnelling. This assessment and design process would be a guide in the construction of tunnels in heavily weathered and fractured rock mass situation.

• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.277-292
• /
• 2018

This paper presents the development and implementation of an artificial intelligence (AI)-based deep excavation induced wall and ground displacements and wall support member forces prediction program (ANN-EXCAV). The program has been developed in a C# environment by using the well-known AI technique artificial neural network (ANN). Program used ANN to predict the induced displacement, groundwater drawdown and wall and support member forces parameters for deep excavation project and run the stability check by comparing predict values to the calculated allowable values. Generalised ANNs were trained to predict the said parameters through databases generated by numerical analysis for cases that represented real field conditions. A practical example to run the ANN-EXCAV is illustrated in this paper. Results indicate that the program efficiently performed the calculations with a considerable accuracy, so it can be handy and robust tool for preliminary design of wall and support members for deep excavation project.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.49-83
• /
• 2005

ESCP Project showed an urban excavation case and introduced design method for case of Soil-Structure behavior in urban excavation. In this case, a retaining structures design to analysis the behavior of retaining wall and adjacent structures in urban excavations was applied by using a Elasto-plastic beam and limit Equilibrium analysis and soil-structure interaction analysis. Reliable design of earth retaining structures and the ground adjacent to braced wall in urban excavation are often difficult due to many variable factors. The ground settlement and the damage of adjacent structures in urban excavation has been an imprtant issue. Therefore, the stability of the adjacent structures must be secured with the excavation support and research on the protection of adjacent structure is necessary.

• Geomechanics and Engineering
• /
• 제30권2호
• /
• pp.153-167
• /
• 2022

This study proposes a method to analyze the distribution of coal porosity disturbances after the excavation of ultra-large-diameter water jet boreholes using a coal wetting and softening model. The high-pressure jet is regarded as a short-term high-pressure water injection process. The water injection range is the coal softening range. The time when the reference point of the borehole wall is shocked by the high-pressure water column is equivalent to the time of high-pressure water injection of the coal wall. The influence of roadway excavation with support and borehole diameter on the ultra-large-diameter jet drilling excavation is also studied. The coal core around the borehole is used to measure the gas permeability for determining the porosity disturbance distribution of the coal in the sampling plane to verify the correctness of the simulation results. Results show that the excavation borehole is beneficial to the expansion of the roadway excavation disturbance, and the expansion distance of the roadway excavation disturbance has a quadratic relationship with the borehole diameter. Wetting and softening of the coal around the borehole wall will promote the uniform distribution of the overall porosity disturbance and reduce the amplitude of disturbance fluctuations.

• Geomechanics and Engineering
• /
• 제33권5호
• /
• pp.507-518
• /
• 2023

The effects of various supporting arrangements have been investigated on an excavation support system using a numerical tool. The purpose of providing different supporting arrangements was to limit the pile wall deflection in the range of 0.5% to 1% of the excavation depth. Firstly, a deep excavation supported by sheet pile wall was modeled and the effects of sheet pile wall thickness, excavation depth and distance to adjacent footings from sheet pile wall face were explored on the soil deformation and wall deflection. Further analysis was performed considering six different arrangements of tieback anchors and struts in order to limit the wall deflections. Case-01 represents the basic excavation geometry supported by sheet pile wall only. In Case-02, sheet pile wall was supported by struts. Case-03 is a sheet pile wall supported by tieback anchors. Likewise, for the Cases 04, 05 and 06, different arrangements of struts and tieback anchors were used. Finally, the effects of different supporting arrangements on soil deformation, sheet pile wall deflection, bending moments and anchor forces have been presented.

• 한국터널지하공간학회 논문집
• /
• 제4권3호
• /
• pp.185-193
• /
• 2002

본 연구에서는 풍화토층에 굴착된 지하철 터널의 변형거동과 종방향 지보재의 보강효과가 3차원 유한차분해석에 의해 조사되었다. 굴착방법이 터널 변형거동에 미치는 영향을 조사하기 위해서 반단면 및 전단면의 2가지 굴착방법이 고려되었다. 또한, 우산형 막장보강법 (RPUM) 및 유리섬유 파이프의 보강효과가 비교되었다. 터널 변형거동을 분석하기 위해 막장변위, 내공변위, 선행변위 및 측벽변위가 조사되었고, 굴착방법 및 종방향 지보재의 효과가 지표침하량를 사용하여 분석되었다. 해석 결과, 반단면 굴착이 전단면 굴착 보다 더 큰 내공변위, 선행변위, 측벽변위를 야기시키며, 반면 막장변위는 전단면 굴착이 반단면 굴착에 비해 더 크게 발생됨을 알았다. 또한, 같은 굴착방법에서는 RPUM만이 사용되었을 때가 RPUM이 유리섬유 파이프와 같이 사용되었을 때 보다 모든 변위가 더 켜졌다.

• 터널과지하공간
• /
• 제5권2호
• /
• pp.123-133
• /
• 1995

A two dimensional visco-plastic finite element model capable of handling the multistep excavaton was developed for investigating the effect of excavation-support sequences on the behaviour of underground openings in the jointed rock mass. Ubiquitous joint pattern was considered in the model and joint properties in each set were assumed to be identical. Passive, fully-grouted rockbolts were considered in the model. Visco-plastic deformations of joints and rockbolts were assumed to be governed by Mohr-Coulomb and von Mises yield criteria, respectively. With the ability of removing elements, the model can von Mises yield criteria, respectively. With the ability of removing elements, the model can simulate the multi-step excavation-support sequences. The reliability of the model to the stability analysis for the underground excavation in practice was checked by simulating the behavior of underground crude oil storage caverns under construction.

• Geomechanics and Engineering
• /
• 제17권6호
• /
• pp.573-581
• /
• 2019

Excavation of underground cavern and shaft was proposed for the construction of a ventilation facility in an urban area. A shaft connects the street-level air plenum to an underground cavern, which extends down approximately 46 m below the street surface. At the project site, the rock mass was relatively strong and well-defined joint sets were present. A kinematic block stability analysis was first performed to estimate the required reinforcement system. Then a 3-D discontinuum numerical analysis was conducted to evaluate the capacity of the initial support and the overall stability of the required excavation, followed by a 3-D continuum numerical analysis to complement the calculated result. This paper illustrates the application of detailed numerical analyses to the design of the required initial support system for the stability of underground hard rock mining at a relatively shallow depth.

• 한국지반공학회지:지반
• /
• 제8권4호
• /
• pp.81-98
• /
• 1992

고층건물이나 지하철등의 건설시 지하굴착을 깊게 실시하므로서 지하공간의 활용도를 증대시킬 수 있다. 이 경우 지하를 연직으로 굴착하기 위하여는 흙막이벽과 지지구조를 안전하게 설계 시공하여야 한다. 최근에는 지하굴착시 지하작업공간확보등의 이점 때문에 흙막이벽지지 구조로 앵가를 만이 사용하는 경향이 있다. 본 논문에서는 사질토지반의 지하굴착을 실시한 8개 감각현장에서 굴착을 위한 흙막이벽을 지지하기 위하여 사용된 앵카에 하중계를 부착하여 앵카의 축력을 측정하였다. 측정된 앵카축력으로부터 환산된 측방토압은 흙락이벽체의 강성에 관계없이 지표면으로 탁터 굴착깊이의 30%에 해당되는 깊이까지는 선형적으로 증가하다가 그 깊이 아래부터는 일정분포를 보이는 사다지꼴모양의 분포를 보였다. 이 일정토압 분포부분의 토압은 평균적으로 최종굴착 깊이에서의 Rankine 주동토압의 63%에 해당하거나 쳔직상개입의 17점에 해당하였다. 이 연구 결과 사질토지반의 앵카지지 흙막이벽의 앵카축력설계에 적용하기 위한 측방토압으로는 Terzaghi-Peck이나 Tschebotarioff의 경험적분포를 다소 수정하여 적용할 수 있음을 알았다.