• 제목/요약/키워드: excavation step

검색결과 83건 처리시간 0.024초

다변량분석을 이용한 터널에서의 간편 RMR에 관한 연구 (A Study of Simple Rock Mass Rating for Tunnel Using Multivariate Analysis)

  • 위용곤;노상림;윤지선
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 가을 학술발표회 논문집
    • /
    • pp.493-500
    • /
    • 2000
  • Rock Mass Rating has been widely applied to the underground tunnel excavation and many other practical problems in rock engineering. However, Rock Mass Rating is hard to make out because it is difficult to estimate each valuation items through all kind of field situations and items of RMR have interdependence. So the experts of tunnel assessment have problems with rating rock mass. In this study, using multivariate analysis based on domestic data(1011EA) of water conveyance tunnel, we presented rock mass rating system which is objective and easy to use. The constituents of RMR are decided to RQD, condition of discontinuities, groundwater conditions, orientation of discontinuities, intact rock strength, spacing of discontinuities in important order. In each step, we proposed the best multiple regression model for RMR system. And using data which have been collected at other site, we examined that presented multiple regression model was useful.

  • PDF

시공단계를 고려한 대단면 정거장 터널 안정성 해석 (The stability analysis on large sectional tunnel station considering construction steps)

  • 강은구;김양운;안경철;한명식
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2009년도 춘계학술대회 논문집
    • /
    • pp.1062-1068
    • /
    • 2009
  • Urban construction has numerous difficulties due to ground weakness and various complaints from third party, so it is not economically efficient and constructability is not favorable. Therefore, underground, which has good ground conditions, was used for construction field and facilities such as stations, and they are scaled up to enhance accommodation of facility limitation and function of stations. Large section tunnel station construction has numerous risk factors such as work boundary of excavation equipment, a relaxation of stress concentration, a safety plan of tunnel stability, and so on. Therefore, by using large section tunnel station stability analysis considering construction step, we expect to analyze the latent problem during construction, and to stabilize a future project plan of a large section structure design by using an auxiliary method and a support design.

  • PDF

한강 단층대를 통과하는 하저터널의 안정성 확보에 관한 연구 (Stability Evaluation for a riverbed tunnel in the Han River at the Fault Zone Crossing)

  • 우종태;이송
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제5권3호
    • /
    • pp.225-231
    • /
    • 2001
  • When building tunnels beneath riverbeds where very large quantities of groundwater inflow exist, added to high water head the soil supporting conditions are very poor because the soil consists of sand and silt, etc. It is necessary to have grouting and mini pipe roof installed in the region for ground reinforcement to decrease permeability. According to this result of horizontal boring and laboratory soil testing, ground reinforcement was achieved by L.W grouting for range of 3.0 times the tunnel radius, to increase stability of the tunnel we used the ling-cut method, 0.8m for one step excavation, shotcrete with 25cm thick, steel lib with H-$125{\times}125$. and a temporary shotcrete invert 20cm thick was installed to prevent deformation of the tunnel.

  • PDF

창조경제 확산을 위한 중소기업 임직원의 역량강화방안 : 융합과제발굴을 중심으로 (Capacity Building Measures of SMEs Employee for Spreading the Creative Economy : For focus on Excavation of Convergence Project)

  • 한지원;박기남;임희석
    • 디지털융복합연구
    • /
    • 제12권6호
    • /
    • pp.607-614
    • /
    • 2014
  • 중소기업 간 지식 기술 융합의 필요성이 크게 인식되고 있는 요즘, 이를 실천하고 활성화 시킬 수 있는 구체적인 방안이 부재하고 고품질의 융합 실천 교육 콘텐츠 보강이 필요한 실정이다. 이에 본 연구에서는 중소기업 임직원의 융합과제 발굴역량 강화를 위한 사례중심 교육과정 및 콘텐츠 개발을 위해 3단계로 연구목표를 세분화하여 제시한다. 1차로 중소기업의 국내 외 융합 동향 및 현황파악 및 융합성공사례 분석을 위한 표준분석 방안을 마련하고, 2차로 중소기업 융합 성공사례 발굴 및 자료수집과 융합 성공 사례 분석을 통한 융합 모형을 개발하며, 3차로 중소기업 임직원 융합 역량 강화를 위한 교육과정 분석 및 교육 프로그램을 개발하고자 한다. 이를 통해 융합 교육을 통한 새로운 성장 동력을 발굴하고, 신제품 새로운 서비스 개발 및 신시장 창출, 중소기업 기술과 성장의 한계를 극복하고 재도약할 수 있는 계기를 마련하여 지식 기술 융합을 통한 글로벌 트랜드 부합 및 기업 경쟁력 강화를 이루고자 한다.

Shear strength behaviors of grouts under the blasting induced vibrations

  • Sagong, Myung;Choi, Il Yoon;Lee, Jun S.;Cho, Chung-sik
    • Geomechanics and Engineering
    • /
    • 제21권2호
    • /
    • pp.207-213
    • /
    • 2020
  • Umbrella Arch Method (UAM) often employed in the tunnel construction under poor rock mass conditions in Korea. Insertion of steel pipes at the periphery of the tunnel and infiltration of grouts along the pipes into the rock masses increases tunnel stability. There are two major effects of grouts expected at the tunnel face: 1) increase of face stability by enhancing the frictional resistance of discontinuities and 2) decrease of permeability along the rock masses. Increase of resistance and decrease of permeability requires a certain curing time for the grout. In Korea, we require 24 hours for curing of grout, which means no progress of excavation for 24 hours after infiltration of grouts. This step delays the tunnel construction sequences. To eliminate such inefficiency, we propose MTG (Method for Tunnel construction using Grouting technology), which uses extended length of steel pipes (14 m) compared to conventional pipe roof method (12 m). The merit of MTG is the reduction of curing time. Because of the approximately 2 m extension of the length of steel pipe, blasting can be done after infiltration of grouting. For this paper, we conducted experiments on the shear strength behaviors of grout infilled rock joint with elapsing of curing time and blasting induced vibration. The results show that blasting induced vibration under MTG does not influence the mechanical features of grout material, which indicates no influence on the mechanical behaviors of grout, contributing to the stability of tunnels during excavation. This result indicates that MTG is a cost effective and fast construction method for tunneling in Korea.

점성토의 유한요소해석에서 전단파라미터에 따른 성토 및 굴착 거동 (Embankment and Excavation Behaviour with Shear Parameters of Soft Clayey Soil in FEM)

  • 김병일;최찬용;홍강한;한상재
    • 한국지반공학회논문집
    • /
    • 제34권2호
    • /
    • pp.5-17
    • /
    • 2018
  • 본 연구에서는 연약지반에서의 재하/제하에 대한 안정해석과 응력-변형 해석시 전단 파라미터(UU; Unconsolidated Undrained, CU; Consolidated Undrained(전응력), ${\bar{CU}}$ ; Consolidated Undrained(유효응력))에 따른 초기 지중응력, 강도, 응력-변형 특성을 평가하였다. 시공단계를 고려한 유한요소 해석시 입력하는 전단 파라미터에 따라 초기 지중응력과 이후 해석 결과가 달라질 수 있음을 확인하였다. 특히, Mohr-Coulomb 모델의 입력 파라미터인 내부마찰각(Phi)을 0으로 입력하여 초기 지중응력과 이후 응력-변형 거동을 해석할 경우 잘못된 결과를 도출 할 수 있다는 것을 확인하였다. 전응력 파라미터, CU를 초기 및 전단시 일괄 적용한 해석과 유효응력 파라미터, CU에서 전응력 파라미터, CU로 변경한 해석 결과가 큰 차이를 보이지 않았다. 따라서, 연약지반에 대한 수치해석시 CU 파라미터를 적용하여도 초기 지중응력과 이후 응력-변형 거동에 큰 차이 없이 예측할 수 있음을 알 수 있었다. 또한, 실무에서 적용하기 편한 방법으로 실제 흙의 거동과 동일한 강도를 갖는 Mohr-Coulomb 모델의 전단 파라미터를 산정하는 방법을 제안하였다.

유전자 알고리즘 및 인공신경망 이론을 이용한 쏘일네일링 굴착벽체 시스템의 최적설계 (Optimum Design of Soil Nailing Excavation Wall System Using Genetic Algorithm and Neural Network Theory)

  • 김홍택;황정순;박성원;유한규
    • 한국지반공학회논문집
    • /
    • 제15권4호
    • /
    • pp.113-132
    • /
    • 1999
  • 국내에서는 근래에 들어, 다양한 지반조건 및 현장여건을 지닌 지하굴착 및 사면보강 등의 현장에 쏘일네일링 공법의 적용이 점차 확대되어 왔다. 또한 쏘일네일링 공법의 설계는 일반적으로, 한계평형적 해석방법에 의거해 보강토체의 활동에 대한 소요안전율을 만족하는 단면을 우선 결정한 다음, 수치해석 프로그램을 이용하여 이 단면 전면벽체에서 예상되는 최대변위를 추가로 확인하는 비교적 단순화된 과정을 통해 이루어져 왔다. 그러나 쏘일네일링 공법의 경우 관련 설계변수가 비교적 다양한 특징을 지니고 있으며, 따라서 이와 같은 설계변수들 사이의 상호 연관성을 고려하는 보다 합리적인 설계법 제시 차원의 노력이 지속적으로 요구되는 실정이다. 이외에도 원지반 흙의 비등방성, 채취시료의 교란 정도 및 측정상의 오차 등 설계에 적용되는 각종변수가 지니고 있는 불확실성 등을 감안할 때, 현재 시점에서는, 축적된 다양한 현장의 계측자료를 수집하여 관련 설계변수 사이의 상호 연관성을 체계적으로 분석하려는 노력과 더불어 신뢰성 있는 효율적인 기법을 이용하여 경제성이 강조되는 최적화 설계 차원의 노력도 요구되는 시점으로 판단된다. 이와 같은 목적의 일환으로, 본 연구에서는 유전자 알고리즘을 이용하여 쏘일네일링 굴착벽체 시스템의 시공비용 최소화를 위한 최적설계기법을 제시하였으며, 또한 제시된 최적설계기법의 전제조건중의 하나로 고려되는 숏크리트 전면벽체의 발생변위를 합리적으로 예측하기 위해 인공신경망 이론을 도입하였다. 다양한 비교.분석과 더불어, 최종적으로는 제시된 쏘일네일링 굴착벽체 시스템 최적화 기법의 적합성 여부를 종합적으로 확인하기 위해, 실제 시공이 이루어진 현장의 설계단면과 제시기법에 의거해 최적화된 설계단면을 서로 비교.분석하였다.칠음 정도의 정량화 작업을 연구한 것이다.M SDS와 117mM $SOFTANOL\circledR-90$의 Log $K_m$은 각각 2.95-3.76, 2.95-3.49의 값을 나타내었다. 또한 SDS와 $SOFTANOL\circledR-90$의 경우 Log $K_m과\; Log\; K_{ow}$는 선형적인 관계를 보였다. 계면활성제 용액에서 BTEX의 분배 개념은 지반내 포집되어 있는 소수성 유기 오염물의 제거를 통한 지반복원과 효율성 평가에 중요한 역할을 할 것이다.largely ignored since the introduction of western medical science, and was considered something used only by the aged or the uneducated. Moreover, Health concerned practices and customary traditional therapy have been discarded in the clinical medicine as "unscientific" or "unsystematic". As described above, it is true that Korean nursing has developed in the quantitative aspect only adhering to western nursing intervention. Now it is the time to stop to hold ourself and to look back our past. To find and develop the originality of Korean nursing to

  • PDF

논산 개태사지의 국가문화재적 가치 및 종합정비방안 수립에 관한 연구 (Study of the Value of National Cultural Heritage in the Gaetaesa Temple Site, Nonsan and the Establishment of an Integrated Maintenance Plan)

  • 서정영
    • 한국조경학회지
    • /
    • 제47권2호
    • /
    • pp.76-87
    • /
    • 2019
  • 본 연구의 목적은 논산 개태사지의 현황과 국가문화재적 가치를 분석하고, 국가지정문화재 지정을 위한 명칭, 허용기준 등을 설정하여 이를 바탕으로 종합정비방안과 사업추진 및 관리운영계획을 제안하는 것이다. 논산 개태사지는 전례 없는 진전을 갖추고 있으며, 유구 자체의 잔존상황도 비교적 양호한 편으로 추후 시 발굴조사를 지속적으로 진행하여 논산 개태사지의 문화재로서의 품격을 격상시킬 필요가 있다. 또한, 개태사지는 보물급의 문화유산을 반출하고, 역사적 문화적 가치가 우수하기 때문에 도지정문화재가 아닌 국가지정문화재로 지정하여 체계적으로 관리할 필요가 있다. 이에 따라 본 연구는 고문헌, 고지도, 관련 학술논문 및 서적 등 문헌고찰을 통하여 논산 개태사지의 연혁, 역사적 사실 확인을 하였으며, 논산 개태사지 내에서 발굴된 유구 및 유적, 건물지 등 현황을 파악하기 위하여 1986년 1차 발굴조사 이후 6차까지 진행된 시 발굴조사결과를 참고하였다. 또한, 역사적, 유물적 유적 등으로 구분하여 논산 개태사지의 가치를 분석하여 논산 개태사지의 범위와 국가지정문화재(사적) 문화재구역(안)을 설정하였다. 이를 바탕으로 논산 개태사지 종합정비방안과 사업추진 및 관리운영 계획을 제안하였다. 추후 지속적인 시 발굴조사를 진행하고, 토지매입을 위한 주민의견 등을 반영하여 종합정비방안과 사업추진 및 관리운영 방안을 보완해야 하며, 본 연구에서 제안하는 사업은 특성상 사업비가 많이 소요되므로 향후 단계별 연차별 사업추진 계획이 세부적으로 수립되어야 할 것이라 판단된다.

시공과정 및 현장계측을 고려한 NATM 터널의 수치해석적 연구 (A Study on the Numerical Analysis of A NATM Tunnel with Consideration of Construction Procedure and Field Measurement)

  • 박춘식;강만호
    • 터널과지하공간
    • /
    • 제20권1호
    • /
    • pp.28-38
    • /
    • 2010
  • 본 연구는 NATM 터널의 천단변위, 내공변위, 숏크리트 응력, 록볼트 축력 등의 현장 계측치를 분석하고, 2D 3D 연속체 수치해석 및 2D 불연속체 불연속면 변형 해석을 실시, 그 결과를 비교 검토하여 각 구간의 시공과정에 따른 전반적인 변위와 거동의 경향성 및 수치해석적 접근의 적용성을 검토하고자 하였다. 그 결과 전단면 굴착 구간(지보패턴 P1~P3)에서 터널의 천단 및 내공변위를 예측하고자 할 시에는 2D 연속체 수치해석만으로도 가능하나, 상 하 반단면 구간(지보패턴 P4~P6)에서 터널의 천단 및 내공변위를 예측하고자 할 시에는 반드시 2D 불연속 수치해석을 수행하여야 한다. 한편, 2D 연속체 수치해석만으로도 전 구간에 대한 터널 내 숏크리트 응력 및 록볼트 축력의 예측이 가능하다. 그리고 시공 단계에 따른 거동 및 경향성을 확인하고자 할 시에는 3D 연속체 수치해석을 수행하여야 하며, 대형 대피소 등의 접속부의 경우도 반드시 3D 연속체 수치해석을 수행하여야 한다.

북유럽 인양목선의 보존처리-덴마아크 Viking선을 중심으로 (The conservation of the ancient ships salvaged in North Europe-Especially on the Conservation of the Viking ships - Especially on the Conservation of the Viking ships in Denmark)

  • 배병환
    • 보존과학연구
    • /
    • 통권7호
    • /
    • pp.278-291
    • /
    • 1986
  • In this report the practical case of Viking ship's conservation in Denmarke specially among the Eurpoean nations is introduced. The contents of it are summarized as follows :From 1957 to 1962 the Danish National Museum Salvaged five Viking ships from the bottom of Roskilde Fjord, Which were composed of the pieces of timber whose surface was soft because they had lain on the sea bed for about a thousand years. Excavation had been carried out in the same way as in the field by driving down a sheet piling around the wrecks and pumping the water out. These pieces of the wreck ships were packed in airtight plastic bags one by one to be transported for Brede and then immidiately had to go through the treatment for conservation. The conservation treatment process for the pieces includes three steps ; the preliminary process prior to the hardening treatment, the hardening and the assemble of the ships. In the first step ; the preliminary process, all remains of mud and shells from the fjord bed are washed off, and measuring followed ; every single piece of wreckage was drawn so that the form and size of the piece, nail holes, and breaks were registered before conservation. In the second ; the hardening treatment step, the pieces of the woreckage were filled with P.E.G. This Polyethylene Glycol method was the best to handle in the subsequent mounting of the ships in the museum. In the final, the Glycol-treated pieces were pieced together to spips with support of a system of reinforcements. They were to fit in place after corrections of the form were made several times.

  • PDF