• 터널과지하공간
• /
• 제7권3호
• /
• pp.208-220
• /
• 1997

To asses the stability of structure around shaft during the excavation of -300 ml hopper room at 2nd shaft in Jangsung mine, some measurements were made with blast monitoring, stressmeter, extensometer and inclinometers. Instrumentations proved to be reliable and data were montiored over six month period. Stressmeters were set at the points of wall and arch of inset gang(level). Induced stresses were measured with the magnitude of 2.81 kgf/$\textrm{cm}^2$(tensile stress) and -4.45kgf/$\textrm{cm}^2$(compressive stress) respectively. These values were converged after two months. The magnitude of axial force in rock bolt was measured with 1.98 ton between the points of M2(2.25m) and M3(1.5 m) but this value was assumed within allowable level. Maximum displacement was also measured with 2 mm at the dephs of 12m from surface. But this value belongs within guide level.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.293-300
• /
• 2004

A new earth retention system(Innovative Prestressed Wale System) has been developed and introduced. IPR earth retention system provides an economical benefit, construction easiness, good performance and safety. IPS is a prestressed wale by using a steel wire, which provides a high stiffness to resist the earth pressure. In order to investigate the applicability and the safety of new IPS system, field tests were performed. A new IPS system applied in a trench excavation performed successfully. Basic principles and mechanism of IPS system and measure performance were presented and discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.902-911
• /
• 2009

There appeared many difficulties due to various construction factors during the recent construction adjacent to the housing for the aging. In particular, the study is going to summarize and overview the selection procedure and construction details of the excavation engineering of this site, which could ensure workability and economic efficiency through the construction of a shorter anchor than the length of the existing anchor with a minimal marginal space without invading the nearby private land.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.78-83
• /
• 2007

The paper focuses on the establishment of optimized bucket path planning and trajectory control designated for force-reflecting backhoe reacting to excavation environment, such as potential obstacles and ground characteristics. The developed path planning method can be used for precise bucket control, and more importantly for obstacle avoidance which is directly related to safety issues. The platform of this research was based on conventional papers regarding the kinematic model of excavator. Jacobian matrix was constructed to find optimal joint angles and rotation angles of bucket from position and orientation data of excavator. By applying Newton-Raphson method optimal joint angles and bucket orientation were derived simultaneously in the way of minimizing positional errors of excavator. The model presented in this paper was intended to function as a cornerstone to build complete and advanced path planning of excavator by implementing soil mechanics and further study of excavator dynamics together.

• 터널과지하공간
• /
• 제4권1호
• /
• pp.63-76
• /
• 1994

This paper discusses contents of the existing design, the behaviours prediction on the strut and retaining wall around subsurfaces, and also evaluates the measured results in comparison with the management criterion during excavation period of ventilation shaft at Pusan-Subway 220. Field measurements showed that maximum displacement 23.74 mm at boundary site of multistratification and the weathered rock to be formed at 0.2~0.6 H of total excavating depth(H), 68 ton of maximum axial force and 4.4X102 kg/cm2 of stress on strut. The measured axial force exceeds prediction levels by up to 50 percent at the weathered soil & rock, and the others come under the category of their levels. The great gap of both field measurements and prediction on behaviour makes a difference of the site situation at the design stage and the practical working. This measured value is greatly safety in comparison with that of the safety criterion, but axial force at 4~5 strut of ventilation shaft l is higher than the prediction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.320-329
• /
• 2005

The use of diverse methods for the retaining system has been continuously increased in order to maintain the stability during excavation. However, ground anchor system occasionally may have the restriction in urban excavation sites nearby the existing structures because of space limitation. In this case, soil nailing system with relatively short length of nails could be efficiently useful as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in excavating the zone of weak soils or nearby the existing structures. Therefore, applying the pretension force to the soil nails then could play important roles to reduce deformations mainly in an upper part of the nailed-soil excavation system as well as to improve the local slope stability. In this study, a newly modified soil nailing technology named as the PSN(Pretention Soil Nailing) is developed to reduce both facing displacements and ground surface settlements during top-down excavation process as well as to increase the global slope stability. Up to now, the PSN system has been investigated mainly focusing on an establishment of the design procedure. In the present study, the field tests including pull-out tests were fulfilled to investigate the behavior of characteristics for PSN system. All results of tests were also analyzed to provide a fundamental and efficient design.

• 한국지반공학회논문집
• /
• 제37권12호
• /
• pp.89-105
• /
• 2021

본 논문에서는 흙막이 시설물 내진설계의 필요성을 살펴보기 위한 기초 연구로서, 유한차분해석 프로그램인 FLAC을 이용하여 가상의 대심도 흙막이 구조물을 대상으로 내진해석을 수행하고, 지진하중이 흙막이 시설물의 동적 거동에 미치는 영향을 평가하였다. 그 결과 지진하중 작용 시 벽체에 발생하는 모멘트와 지보재의 최대 축력이 지진하중 작용 전 최종 굴착단계와 비교하여 각각 98%, 87%까지 증가하는 것으로 나타나, 동적 토압이 구조물에 미치는 영향이 매우 큰 것으로 분석되었다. 또한 동해석 결과로 얻은 부재력을 이용하여 현행 기준에 따라 설계된 흙막이의 안정성을 재평가하고, 지진하중이 구조물의 설계에 미치는 영향을 분석하였다.

• 한국지반공학회논문집
• /
• 제20권7호
• /
• pp.197-206
• /
• 2004

쏘일네일링 공법을 도심지 지하굴착 공사에 있어, 지중매설물이 인접하여 존재하거나 대지경계선 등의 준수 등 시공조건에 따라서 설치네일의 길이가 제한되는 경우 및 연약한 지반을 보강할 경우 등과 같은 벽체변위 및 지표침하 억제와 안정성 증대 등을 위하여, 지반앵커공법과 유사한 프리텐션 방식의 도입이 필요한 실정이다. 지반앵커공법과 유사한 프리텐션 방식의 쏘일네일링 공법을 도입하게 될 경우, 단계별 굴착시 발생하는 변위를 최소화할 수 있을 것으로 예상되며 국부적인 안정성도 증대할 것으로 사료된다. 따라서, 본 연구에서는 단계별 굴착시 유발되는 벽체변위 및 침하량 등을 억제하기 위한 노력의 일환으로, 프리텐션 쏘일네일링 시스템을 개발하였다. 또한 최대 프리텐션하중 및 프리텐션 시스템의 안정성을 평가하기 위해, 영향원 반경, 다이레이턴시 각, 정착길이 등을 반영한 설계기법을 제안하였으며, 펀칭전단파괴에 저항할 수 있는 숏크리트의 요구두께를 결정하는 신뢰도 평가기법을 제안하였다. 아울러 설계예제와 $FLAC^{2D}$ 프로그램 수치해석을 통해 프리텐션에 의한 변위 감소효과를 살펴봤으며, 전단강도감소기법을 도입한 안정해석이 $FLAC^{2D}$ 프로그램을 토대로 수행되었다.

• 한국터널지하공간학회 논문집
• /
• 제20권4호
• /
• pp.657-669
• /
• 2018

최근 복잡한 도심지 개발이 포화상태에 이르러 지하공간 개발에 많은 관심이 집중되고 있으며, 건물의 대형화 및 고층화로 지하공간의 활용도를 높이기 위해 대심도 굴착이 자주 발생하고 있다. 또한, 도심지 기존도로 하부로 지하철, 경전철 등이 건설되고 있어 대형건물 신축을 위한 흙막이 굴착 시 기존 지하구조물과 인접하여 주의를 요하는 사례가 자주 발생하고 있다. 따라서 본 연구에서는 모형시험을 통해 흙막이벽체 강성과 터널 이격거리에 따른 흙막이벽체의 거동특성 및 인접한 터널의 거동을 파악하고자 하였다. 연구 결과, 흙막이벽의 변형은 벽체의 강성이 증가함에 따라 감소하는 경향을 보였으며, 버팀대에 작용하는 축력도 벽체의 강성에 따라 다른 양상을 보였다. 흙막이벽체의 강성이 작은 경우(2 mm) 버팀대 축력이 최대가 되는 지점은 벽체의 0.3H 부근에서 나타났고, 흙막이벽체의 강성이 큰 경우(5 mm)에는 벽체의 0.7H 부근에서 버팀대 축력이 최대로 나타났다. 또한, 터널 내공변위는 흙막이벽체와의 이격거리가 가까울수록, 벽체의 강성이 작을수록 뚜렷하게 발생하였으며 내공변위가 우측하부로 집중되는 경향을 보였다. 지반굴착에 따른 지표침하량은 터널과 흙막이벽체의 이격거리가 가까울수록 지표침하 영향범위가 감소하는 경향을 보였으며 이는 터널의 강성이 영향을 미친것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.225-232
• /
• 2003

The behaviour of ground induced by tunneling of 2arch tunnels may differ from the one caused by usual type tunnels. This paper describe the behaviour created by the size of pilot tunnel and the condition on the construction method of center piller Also, loads acting on the supports of the first tunnel and the center pillar during the excavation of second tunnel is investigated by numerical analyses. The results of numerical analyses are compared to the data records of measurement results, i.e. force on the support system and ground displacement.