• 한국지반공학회지:지반
• /
• 제26권9호
• /
• pp.33-47
• /
• 2010

Underground constructions continue to provide challenges to Geotechnical Engineers yet they pose the best opportunities for development and deployment of advance technologies for analysis, design and construction. The reason for this is that, by virtue of the nature of underground constructions, more data and information on ground characteristics and response become available as the construction progresses. However, due to several barriers, these data and information are rarely, if ever, utilized to modify and improve project design and construction during the construction stage. To enable the use of evolving realtime data and information, and adaptively modify and improve design and construction, the paper presents an analysis and design system, called AMADEUS, for underground projects. AMADEUS stands for Adaptive, real-time and geologic Mapping, Analysis and Design of Underground Space. AMADEUS relies on recent advances in IT (Information Technology), particularly in digital imaging, data management, visualization and computation to significantly improve analysis, design and construction of underground projects. Using IT and remote sensors, real-time data on geology and excavation response are gathered during the construction using non-intrusive techniques which do not require expensive and time-consuming monitoring. The real-time data are then used to update geological and geomechanical models of the excavation, and to determine the optimal, construction sequences and stages, and structural support. Virtual environment (VE) systems are employed to allow virtual walk-throughs inside an excavation, observe geologic conditions, perform virtual construction operations, and investigate stability of the excavation via computer simulation to steer the next stages of construction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 정보화시공 학술발표회
• /
• pp.103-122
• /
• 2001

For prediction of ground movement per the excavation step, observational results of ground movement during the construction was very different with prediction during the analysis of design. step because of the uncertainty of the numerical analysis modelling, the soil parameter, and the condition of a construction field, etc. however accuratly numerical analysis method was applied. Therefore, the management system through the construction field measurement should be achieved for grasping the situation during the excavation. Until present, the measurement system restricted by ‘Absolute Value Management system’only analyzing the stability of present step was executed. So, it was difficult situation to expect the prediction of ground movement for the next excavation step. In this situation, it was developed that ‘The Management system TOMAS-EXCAV’ consisted of ‘Absolute value management system’ analyzing the stability of present step and ‘Prediction management system’ expecting the ground movement of next excavation step and analyzing the stability of next excavation step by‘Back Analysis’. TOMAS-EXCAV could be applied to all uncertainty of earth retaining structures analysis by connecting ‘Forward analysis program’ and ‘Back analysis program’ and optimizing the main design variables using SQP-MMFD optimization method through measurement results. The application of TOMAS-EXCAV was confirmed that verifed the three earth retaing construction field by back analysis.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.57-63
• /
• 2016

Recently, subways in the city are formed a vast underground network which is interfered with construction when large-scale infrastructure will be planned to nearby existing subway tunnels. Researches have been restricted to estimate stability of existing subway tunnel due to adjacent excavation causued by small construction such as buildings. In this paper, OO underpass is planned on the top of existing subway tunnel, which will be need large-scale excavation, is selected as a subject of study. And the purpose of this study is to analyze the effects on existing subway tunnel due to excavation by stages on construction of underpass. The 3D-numerical analysis was performed by using the MIDAS/GTS program. The stability on existing subway tunnel caused by sequential excavation is analysed using numerical results. Based on the analysis, the excavation orders and reinforcement methods was suggested for stability of exiting subway tunnel.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.153-166
• /
• 1999

일반적으로 도심지에서 이루어지는 굴착은 안정성의 중요도에 비하여 해석의 정확도가 떨어지기 때문에 시공 중 현장계측관리가 필수적으로 수반된다. 그러나 계측은 이미 진행된 공정의 거동을 나타내는 것이고, 실제로 시공관리에 도움이 되는 향후 예정된 공정에 대한 예측에는 한계가 있다. 본 연구에서는 계측결과를 해석에 반영하여 예측 결과의 신뢰성을 제고하는 역해석기법을 이용하여 굴착 시공 중 차후 공정의 거동예측을 정확하게 예측할 수 있는 굴착 관리 정보화 시스템을 개발하였다. 개발시스템은 탄소성 지반스프링 모델을 이용한 탄소성 기법을 토대로 측정변위와 모델에 의하여 계산된 변위간의 최소자승 오차를 최소화하는 역해석 기법을 사용하였으며, 정해석, 계측관리, 역해석을 시스템 내에서 일관되게 수행할 수 있고, 실시간 적용과 사용자의 편의를 감안하였다. 개발된 시스템을 두 가지 사례에 적용한 결과 굴착 지반의 거동을 정확하게 예측할 수 있음을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.158-168
• /
• 1994

This report describes aspects of recent braced excavation constructed in built up areas where adjacent buildings or underground utilities are likely to be subjected to settlement and damages. Trends and choice of earth retaining structures for deep excavation are present, and some desigen and construction techniques are introduced in order to minimise possible adverse effects to the urban environment. Some problems in design and construction of braced excavation in urban area are closely examined and remedial measrures are proposed.

• 한국터널지하공간학회 논문집
• /
• 제25권5호
• /
• pp.357-371
• /
• 2023

TBM을 이용한 전력구 공사에서 수직구는 TBM 장비 및 전력선의 진출입을 위해 필수적인 구조물이다. 수직구는 지반을 수직으로 관통하여 굴착하기 때문에 암반을 굴착하는 경우가 많다. 암반 지반은 대부분 발파나 할암 공법을 적용하여 굴착하므로 이때 발생하는 소음 및 진동, 도로 점유로 인해 민원이 발생하고 있다. 따라서 기존 공법의 대안으로 기계식 굴착장비를 이용한 수직구 굴착을 고려하였다. 다만, 현 기술 수준에서 수직구 굴착장비는 암반의 압축강도 약 120 MPa 이상에서는 굴착성능이 현저히 저하되어 고강도 암반 지반 적용에 한계가 있다. 본 연구에서는 암반에서 기계식 굴착 성능 개선을 위해 연마재 워터젯 기술을 굴착 보조공법으로 활용하는 방안에 대해 검토하였다. 연마재 워터젯 절삭성능에 대한 검증을 위해 암석 절삭실험을 수행하고, 실험결과로부터 이격거리, 이송속도, 수압 조절을 통해 지반조건 변화에 대응하여 굴착성능을 확보하는 것이 적절할 것으로 판단하였다. 또한, 일축압축강도와 RQD, 굴진율의 관계를 이용하여 연마재 워터젯을 이용한 인위적인 절리생성을 통해 굴착성능을 향상시키는 방안을 제시하였다. 본 연구결과는 향후 수직구 기계식 굴착장비 도입을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.113-120
• /
• 1999

Deep excavation,1 in the urban areas may cause terrible damages to the adjacent structures. Most damages are due to the settlement of ground during excavation work. This article introduces two actual examples of structure damage in subway construction projects. A through of attempts to find out the factors that are affecting to the settlement of ground was made through site investigations and analyses of measurement data. Some suggestions are given to prevent the repeat of trial and error in deep excavation projects. This kind of attempts are eccentrical to the development and improvement of information-oriented construction method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.303-308
• /
• 2004

It is recently reported that the importance of environmental impact assessment(EIA) about groundwater outflow problems is beingy raised in the case of tunnel excavation during railroad construction. The EIA about groundwater outflow into railroad tunnel is generally performed using the results of numerical analysis embodied through groundwater flow modeling program like MODFLOW. The basic data for this modeling include (1) the geological and hydrogeological investigation data along the planned block of tunnel excavation, (2) total amount of outflowed groundwater during tunnel excavation, and (3) the status of groundwater level fluctuation in the water-supply wells distributed in the planned block of tunnel excavation. In this study, the authors analyzed the cases of the computational modeling about groundwater outflow in three planned blocks of railroad tunnel, and suggest the environmental impact factors and mitigation plan during EIA of tunnel excavation in railroad construction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.643-650
• /
• 2009

The necessary consequence by the rapid economic growth in large-scale urban excavation is increasing. If the site is the congested in downtown, the scale of excavation will get the large-scale and the extreme depth. We have achieved a high level technology internationally by the design and construction of underground excavation since 1980's. But the accidents during excavation are frequently occurring. So, this demage instigates the human life loss as well as economical loss. The recent accident is come about the damage for public facilities such as the railroad, subway and etc. in addition to the loss of life and property. For these reasons, the recent accident is being caused the damage of copious social overhead capital. The reasons of collapse during excavation can be classified roughly into the administrative part(sanction, permission), the investigation and design, the construction and management and etc. In this study the close check for the cases of the recent collapse is performed and the improvement course for the prevention of collapse is found.

• 드라이브 ㆍ 컨트롤
• /
• 제18권2호
• /
• pp.20-31
• /
• 2021

An excavator is a construction machine that can perform various tasks such as trenching, piping, excavating, slope cutting, grading, and rock demolishing. In the 2010s, unmanned construction equipment using ICT technology was continuously developed. In this paper, the path design process was studied to implement the output data of the decision stage, and the path design algorithm was developed. For example, the output data of the decision stage were terrain data around the excavator, excavator mechanism information, excavator hydraulic information, the position and posture of the bucket at key points, the speed of the desired bucket path, and the required excavation volume. The result of the path design was the movement of the hydraulic cylinder, boom arm, bucket, and bucket edge. The core functions of the path design algorithm are the function of avoiding impact during the excavation process, the function to calculate the excavation depth that satisfies the required excavation volume, and the function that allows the bucket to pass through the main points of the excavation process while maintaining the speed of the desired path. In particular, in the process of developing the last function, the node tracking method expressed in the path design table was newly developed. The path design algorithm was verified as this path design satisfied the JCMAS H02 requirement.