• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.801-809
• /
• 2005

This paper proposes a new algorithm for improving the performance of the spatial filter which is the most important part of deinterlacing methods. The conventional edge-based algorithms are not satisfactory in deciding the exact edge direction which controls the performance of the interpolation. The proposed algorithm much increases the performance of the intrafield interpolation by finding exact edge directions based on the binary image. Edge directions are decided using 15 by 3 local window to find not only more accurate but also many low-angle edge directions. The proposed interpolation method upgrades the visual quality of the image by alleviating the misleading edge directions. Simulation results for various images show that the proposed method provides better performance than the existing methods do.

• Structural Engineering and Mechanics
• /
• v.58 no.6
• /
• pp.949-966
• /
• 2016

The second order analysis taking place due to non-linear behavior of the structures under the mechanical and geometric factors through implementing exact and approximate methods is an indispensible issue in the analysis of such structures. Among the exact methods is the slope-deflection method that due to its simplicity and efficiency of its relationships has always been in consideration. By solving the differential equations of the modified slope-deflection method in which the effect of axial compressive force is considered, the stiffness matrix including trigonometric entries would be obtained. The complexity of computations with trigonometric functions causes replacement with their Maclaurin expansion. In most cases only the first two terms of this expansion are used but to obtain more accurate results, more elements are needed. In this paper, the effect of utilizing higher order terms of Maclaurin expansion on reducing the number of required elements and attaining more rapid convergence with less error is investigated for the Bernoulli beam with various boundary conditions. The results indicate that when using only one element along the beam length, utilizing higher order terms in Maclaurin expansion would reduce the relative error in determining the critical buckling load and kinematic parameters in the second order analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.590-593
• /
• 2012

There are a few formula for calculation of propagation constant of buried pipeline. These formula are basically based on the Wait's analytical expressions. Each transformed expression is from America and Japan. And also a propagation constant calculated by a developed bidirectional search algorithm for an application to an exact solution of underground fields represented. This solution is presented by Bridge's article. So several methods are used and values by them are compared whether they are appropriate to estimate an induction voltage. Japan's formula and exact solution are similar to apply for calculation of propagation constant.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.9
• /
• pp.1224-1231
• /
• 2018

Automatic age estimation has been used in many social network applications, practical commercial applications, and human-computer interaction visual-surveillance biometrics. However, it has rarely been explored. In this paper, we propose an automatic age estimation system, which includes face detection and convolutional deep learning based on an inception module. The latter is a 22-layer-deep network that serves as the particular category of the inception design. To evaluate the proposed approach, we use 4,000 images of eight different age groups from the Adience age dataset. k-fold cross-validation (k = 5) is applied. A comparison of the performance of the proposed work and recent related methods is presented. The results show that the proposed method significantly outperforms existing methods in terms of the exact accuracy and off-by-one accuracy. The off-by-one accuracy is when the result is off by one adjacent age label to the above or below. For the exact accuracy, the age label of "60+" is classified with the highest accuracy of 76%.

• Journal of Acupuncture Research
• /
• v.17 no.4
• /
• pp.1-4
• /
• 2000

For checking the exact acupuncture points of Governor Vessel(GV) at lumbar regions, five kinds of method were used to 100 patients who have treated in outpatient in our hospital. They were attached distinguishable stainless steel by the methods. And those were compared with X-ray measuring. As a results, the best method to check Yoyang-gwan(GV3, Ya~oyanggua~n) was the way of using both iliac crests at lateral lying position.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.3
• /
• pp.196-201
• /
• 2000

It is very important not only to detect PD signal but also to locate PD source in power cable line including its accessories. In this paper, the PID localization technique using interruption of metal sheath of cable or accessory is described. By interruption of metal sheath, the polarity of PD pulse to be measured on each part can be compared. With this technique, the exact location of PD in the accessory which has some defects can be found. Although the 'Soft' interruption method, that is, cable sheath is divided by semi-conductive layer with the resistance of higher than 1 k$\Omega$, was used instead of 'Hard' interruption method, it is also possible to detect exact location of PD. This technique is considered to be very effective for detecting PD localization in the type test of cable and accessories.

• Proceedings of the KIEE Conference
• /
• 1986.07a
• /
• pp.490-491
• /
• 1986

Design of electronic circuit should be both economical and reliable. If we put weight on economy, reliability will be lessened vice versa. But in some cases, a Designer should do exact design looking down upon economy. Especially, in integrated circuit, we should design as exactly as possible without much tolerance. In my thesis, I have studied the method for the exact design without much consideration in economy, and I also have developed Monte carlo Simulation program which can be operated by new generation of pseudo random number. Here, in my study, I have found out that new generation of pseudo random number was much more superior to any methods suggested by orthers.

• Structural Engineering and Mechanics
• /
• v.16 no.5
• /
• pp.597-612
• /
• 2003

In this paper, multi-story buildings with shear-wall structures and with narrow rectangular plane configuration are modeled as a multi-step flexural-shear plate with varying cross-section for buckling analysis. The governing differential equation of such a plate is established. Using appropriate transformations, the equation is reduced to analytically solvable equations by selecting suitable expressions of the distribution of stiffness. The exact solutions for buckling of such a one-step flexural-shear plate with variable stiffness are derived for several cases. A new exact approach that combines the transfer matrix method and closed from solution of one-step flexural-shear plate with continuously varying stiffness is presented for stability analysis of multi-step non-uniform flexural-shear plate. A numerical example shows that the present methods are easy to implement and efficient.

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.167-176
• /
• 2008

Recently, lots of studies are performed in developing of active orthosis. Exact and simple muscle force estimation is important in developing orthosis which assists muscle force for disabled people or physical laborers. Hill-type muscle model dynamics is common method for estimation of muscle forces. In Hill-type muscle model, we must know muscle length and moment arm which largely affect muscle force. And several methods are proposed to estimate muscle length and moment arm using joint angle. In this study, we compared estimation results of those method with data from body model of opensim to find which method is exact for estimation of muscle length and moment arm.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.439-442
• /
• 2000

When we measure the acoustical properties of a room using multiple microphone system, it is important to grasp exact time delay of the early reflections from impulse response pair. But it is often very difficult to identify the early reflections in natural shape, because a waveform may be deformed due to the characteristics of a sound source loudspeaker, microphone and reflected wall and overlapping of plural waveform. In this paper to obtain more accurate and enough early reflections, we propose the brand-new five-channel sound receiving system and introduce peak-detecting algorithm. The system has microphones mounted at the origin and four points of a regular tetrahedron. The newly introduced peak-detecting algorithm can show exact peak position in each channel, in spite of deformation due to reflected walls, loudspeaker and microphone.