전해정련공정을 통해 생산된 우라늄 전착물은 약 30%의 용융염을 포함하고 있으므로, 순수한 우라늄을 회수하여 금속 잉곳으로 용이하게 제조하기 위해서는 용융염을 먼저 제거하는 공정이 필요하다. 우라늄 전착물의 염증류 거동을 고찰하기 위해서는 염증류의 주요 공정변수인 유지온도와 진공압의 염제거율에 대한 영향를 고찰해야 한다. 이전 연구에서 우라늄전착물에 대한 염증류 거동에 대해 Hertz-Langmuir 관계식을 적용하여 각 용융염의 휘발 조건에 대해 염휘발계수를 얻을 수 있었으며 이로부터 우라늄 전착물에 대해 99% 이상의 염제거율을 나타내는 염증류공정의 조업조건을 도출하였다[1]. 한편, 염증류 장치에서 사용되는 재질인 스테인리스강에 대해 우라늄 전착물에서 염휘발된 우라늄 금속이 스테인리스강의 주성분인 철, 니켈, 크롬 등과 공정(eutectic melt)을 형성하지 않는 온도에서 염증류공정을 수행해야 하는 제한 조건이 따른다. 이번 연구에서는 우라늄 금속과 스테인리스강과의 반응성을 검토함으로써 우라늄 전착물의 염을 99% 이상 제거할 수 있는 조건을 확인하였다. 그리고 염증류 속도를 증진시키며 휘발된 염을 더 효율적으로 회수하기 위해 공급되는 알곤 흐름에 의한 염증류 장치의 열해석을 수행함으로써 알곤 흐름에 의한 우라늄 전착물에 대한 염증류 거동을 고찰하였다.
한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
/
pp.1206-1209
/
2007
Both PM-OLEDs and AM-OLEDs are now in production. However, manufacturers are still concerned about life-time, voltage drift, operating voltage and efficiency in order to develop larger displays. Most material suppliers seem to be focussing on emitters and the benefits of introducing suitable charge transporters have been largely unexplored. OLED-T has developed a novel organic electron injector (Trade Name: EI-101) which evaporates at a very low temperature of $300^{\circ}C$ as opposed to the conventional LiF which requires $580^{\circ}C$. EI-101 has been found to increase the lifetime by up to 12%, reduce the voltage drift by up to 61% and increase the efficiency by up to 15%. The material can be handled in air and in situ Q-mass spectroscopy on extended thermal evaporation has confirmed its high stability for use in mass production.
Kim, Sang-Keol;Chung, Dong-Hoe;Chung, Taek-Gyun;Kim, Tae-Wan
한국정보디스플레이학회:학술대회논문집
/
한국정보디스플레이학회 2002년도 International Meeting on Information Display
/
pp.766-769
/
2002
We have seen the effects of hole-injection buffer layer in organic light-emitting diodes using copper phthalocyanine(CuPc), poly(vinylcarbazole)(PVK), and Poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate)(PEDOT:PSS) in a device structure of ITO/buffer/TPD/$Alq_3$/Al. Polymer PVK and PEDOT:PSS buffer layer was made using spin casting method and the CuPc layer was made using thermal evaporation. Current-voltage characteristics, luminance-voltage characteristics and efficiency of device were measured at room temperature with a thickness variation of buffer layer. We have obtained an improvement of the external quantum efficiency by a factor of two, four, and two and half when the CuPc, PVK, and PEDOT:PSS buffer layer are used, respectively. The enhancement of the efficiency is attributed to the improved balance of holes and elelctrons due to the use of hole-injection buffer layer. The CuPc and PEDOT:PSS layer functions as a hole-injection supporter and the PVK layer as a hole-blocking one.
The current paper reviews the main characteristics and the operating principles of major fuel atomizers used for gas turbine combustors, including various empirical SMD equations for each atomizers. We have summarized various methodologies for evaluation of the combustion efficiency and for combustor sizing from the selected SMD data. It is found that the combustor sizing as well as the combustion efficiency are totally dependent upon the SMD calculation results, which means that special cares should be taken in choosing the SMD empirical equations.
In the device structure of ITO/tris(8-hydroxyquinoline) aluminum ($Alq_3$)/Al device, we investigated the efficiency improvement of organic light-emitting diodes (OLEDs) depending on the hole-size of crucible boat. The device was manufactured using a thermal evaporation under the base pressure of $5{\times}10^{-6}\;Torr$. The $Alq_3$ organics were evaporated to be 100 nm thick at a deposition rate of $1.5\AA/s$, and in order to investigate the optimal surface roughness of $Alq_3$, the $Alq_3$ was thermally evaporated to be 0.8 mm, 1.0 mm, and 1.5 mm as a hole-size of the boat, respectively. We found that luminance and external quantum efficiency are superior when the hole-size of the boat is 1.0 mm. The external quantum efficiency of the device made with the hole-size of 1.0 mm boat were improved by a factor of ten compared to the devices made with the hole-size of non boat.
보수성 포장재가 지표면 열수지와 중규모 순환장에 미치는 영향을 파악하기 위하여 수치실험과 야외 관측을 실시하였다. 수치실험에 이용된 모형은 LCM(Local Circulation Model)이며, 야외 관측은 대기가 안정되어 날씨가 맑은 2007년 7월 19일 실시되었다. 야외 관측실험에서 보수성 포장재 지표면 온도의 최대치는 1430 LST에서 $41.2^{\circ}C$이고, 보수성 재료가 도포되어 있지 않은 일반 아스팔트보다 $16.1^{\circ}C$ 낮게 관측되었다. 수치실험에서는 증발효율 0.3을 가정한 case BET03에서 관측과 가장 유사한 값을 나타내었다. 이때 현열과 잠열플럭스는 각각 227 와 229 $W/m^2$이다. 수치실험 결과, 보수성 포장재는 낮은 지표면 온도, 혼합고와 관련된 잠열플럭스를 높이는 경향이 나타난다. 보수성 포장재에 의한 잠열플럭스의 불연속은 교외풍과 같은 중규모 순환장의 발달을 강화시키는 역할을 한다.
We have studied the electrical and optical of organic light-emitting diodes depending on hole size of crucible boat using BCP materials. The thickness of TPD, $Alq_3$ and BCP was manufactured 40 nm, 60 nm and 5 nm under a base pressure of $5\times10^{-6}$ Torr using at thermal evaporation, respectively. In order to investigate the optimal surface roughness of BCP, the BCP was thermally evaporated to be 0.8 nun, 1.0 mm, 1.2 mm and 1.5 mm as a hole size of crucible boat, respectively. As the experimental results, we found that the luminous efficiency and the external quantum efficiency of the device is superior to others when hole size of crucible boat using BCP is 1.2 mm. Also, compared to the ones from the devices having the hole size of crucible boat is 1.0 mm and 1.5mm layer, the external quantum efficiency were improved by 2.5 and 2.4 times.
In this study, we investigated about the effect of hole transport layer materials(${\alpha}$-NPD, TPD) depending on the electrical properties of organic light emitting diode. In deposition method, we used thermal evaporation and it was a method for performing thin film by attaching vaporizing a molecule to substrate in a high thermal and vaccum. We analyzed luminance, current density, external quantum efficiency and current efficiency in 40 [nm] as optimization thickness of ${\alpha}$-NPD and TPD. In result of experiment, maximum luminance of TPD had 1.1 times higher than ${\alpha}$-NPD, but ${\alpha}$-NPD had luminance, external quantum efficiency, and current efficiency higher than TPD in low operating voltage. Actually, ${\alpha}$-NPD had efficiency higher than TPD in low operating voltage.
한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
/
pp.375-378
/
2006
Characteristics of doped MgO layer deposited under hydrogen atmosphere were investigated. Hydrogen gas was introduced during e-beam evaporation of doped MgO and its effects on microstructure, cathodoluminescence, discharge voltages and effective yield of secondary electron emission were examined. The results indicated that the hydrogen influences and doped impurities the concentration and energy levels of defects in MgO layer and that affects the luminance efficiency and discharge delays of the panels significantly.
The characteristics of MgO layer deposited under hydrogen atmosphere were investigated. Hydrogen gas was introduced during e-beam evaporation coating process of MgO layer and its effects on microstructure, cathode luminescence spectra, discharge voltages and effective yield of secondary electron emission were examined. The results indicated that the hydrogen influences the concentration and energy levels of defects in MgO layer, which in turn affects the luminance efficiency and discharge delays of the panels significantly.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.