• Journal of Advanced Marine Engineering and Technology
• /
• 제19권3호
• /
• pp.9-23
• /
• 1995

To analyze the spray and flame in D.I. diesel engine, the visualizing methods by schlieren photograph and diffused background illumination photograph with high speed camera are applied to optically accessible D.I.diesel engine. Wcaporating spray, spray droplets and brightness flame are taken with high speed camera by visuallizing method in accordance with various suction air temperature and injection time. The spray and flame image on the film was analyzed by image analyzer. The optically accessible D.I. diesel engine had the similar pressure characteristic to the real D.I. diesel engine. Experimental results showed that shadow areas of the evaporating spray were extended at higher suction air temperature, spray droplets had a max. Penetration length and their penetrating patterns were dependent on the surrounding gas temperature, and flame size after ignition was largely governed by the evaporated fuel quantity at ignition point and by the surrounding gas condition due to piston motion.

• Journal of Radiation Protection and Research
• /
• 제13권2호
• /
• pp.52-56
• /
• 1988

수중의 방사능을 측정하기 위한 전처리과정으로서 이온교환농축법과 증발건조법을 서로 비교하였다. 시료를 증발건조법으로 처리하였을때 방사성물질의 손실율은 이온교환농축법에 비해 20% 정도 많았다. 또, 1리터의 시료를 처리하는 데 소요된 증발시간은 $70^{\circ}C$에서 증발시킨 경우 약20시간이었으나 이온교환농축법으로 같은 양의 시료를 처리하는데 소요된 시간은 약6시간이었다. 따라서 이온교환농축법이 증발건조법에 비해 효과적이며 특히 수중의 저준위 방사성물질 측정에 적합한 것으로 나타났다.

• Agricultural and Biosystems Engineering
• /
• 제1권1호
• /
• pp.54-58
• /
• 2000

In order to investigate the compost process and the evaporating phenomenon, a rotary reversing compost system has been tested in a swine farm. During the summer season, the compost temperature was varied in the range of 50~$60^{\circ}C.$ and the ash content was increased by 12.8 % with the average of 24.7 % at the end of phase. In the winter season, the compost temperature was varied in the range of 40~$57^{\circ}C.$ and the ash content was increased to 8.5 % showing the average of 18 % at the end of phase. In summer, the compost facility could handle all of the animal waste, but it could not handle 1/4~1/3 of the animal excrement during the winter. The required amount of sawdust by this method could be reduced to 1/3 than that of the mixing method at the beginning of compost process.

• 대한화학회지
• /
• 제4권1호
• /
• pp.10-12
• /
• 1957

On the performance of the hydrogen peroxide method for Th-determination we encountered some difficulties, namely the formation of the insoluble matter occured in the nearly neutral solution after evaporation. We carried out the Th-determination in the mixture of the Th and some kind of the rare earth, and found that the insoluble matter was not formed in case of the mixture of Th and some kind of rare earth, but formed in case of Monazite. The formation of the insoluble matter in the case of Monazite sand, however, could be avoid by using the beaker instead of the evaporating dish and by adding the water repeatedly before it was completely evaporated to dryness.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1371-1379
• /
• 2003

The effects of change in injection pressure on spray structure in high temperature and pressure field have been investigated. The analysis of liquid and vapor phases of injected fuel is important for emissions control of diesel engines. Therefore, this work examines the evaporating spray structure using a constant volume vessel. The injection pressure is selected as the experimental parameter, is changed from 22 MPa to 112 MPa using a high pressure injection system (ECD-U2). Also, we conducted simulation study by modified KIVA-II code. The results of simulation study are compared with experimental results. The images of liquid and vapor phase for free spray were simultaneously taken by exciplex fluorescence method. As experimental results, the vapor concentration of injected fuel is leaner due to the increase of atomization in the case of the high injection pressure than in that of the low injection pressure. The calculated results obtained by modified KIVA-II code show good agreements with experimental results.

• Journal of Biosystems Engineering
• /
• 제22권4호
• /
• pp.451-458
• /
• 1997

In order to investigate the compost process and the evaporating phenomenon, a rotary reversing compost system has been tested in swine fm. In the summer season, the compost temperature were varied in the range of 50~$60^{\circ}C$ and the ash content has been increased to 12.8% showing in average of 24.7% at the end of phase. In the winter season, the compost temperature were varied in the range of 40~$57^{\circ}C$ and the ash content has been increased to 8.5% showing in the average of 18% at the end of phase. In summer the compost facility could handle all of the animal waste, but in winter it could not handle 1/4~1/3 of the animal excrement. The needed sawdust by this method could be reduced to 1/3 than that of the mixing method at the beginning of compost process.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권3호
• /
• pp.107-113
• /
• 2009

The objective of this study is to investigate performance characteristics of a household refrigerator using a two-stage compression cycle. The performance of the two-stage compression cycle was measured by varying the compressor speed, condensing temperature, and evaporating temperature. The COP of the two-stage compression cycle was analyzed and then compared with that of the single-stage compression cycle. The optimum combination of compressor speeds for a low- and a high-stage was determined. The COP of the two-stage compression cycle using a PTC (parallel two-stage compression) method was 5.85% higher than that of a STC (serial two-stage compression) method at optimum operating conditions.

• 한국지열·수열에너지학회논문집
• /
• 제5권1호
• /
• pp.1-6
• /
• 2009

In this study, an ORC (Organic Rankine Cycle) is investigated for a low-temperature geothermal power generation by a simulation method. A steady-state simulation model is developed to analyze cycle's performance. The model contains a turbine, a pump, an expansion valve and heat exchangers. The turbine and pump are modelled by an isentropic efficiency. Simulations were carried out for the given heat source and sink inlet temperatures, and given flow rate that is based on the typical power plant thermal-capacitance-rate ratio. HFC-245fa is considered as a working fluid of the cycle. Simulation results, at the given secondary working fluids conditions, show that even though the power can be presented by both the evaporating temperature and the turbine inlet superheat, it depends on the evaporating temperature primarily.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.319-327
• /
• 1988

본 논문에서는 비증발 디이젤 분무의 고속도음영사진을 화상해석 함으로서, 분무선단지달거리와 분무용 이외에 어떤 연문의 분무속 전체 액적군의 평균입자경(sauter mean diameter)과 분무내 연료농도분포를 동시에 측정할 수 있는 새로운 측정법을 제시한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1480-1483
• /
• 2005

Transparent thin composite films (TCFs) were deposited on OLED devices by means of RF sputtering method and their passivation-properties were evaluated by comparing to the e-beam evaporating method. This composite film formed by mixed ratio of MgO (3wt %): $SiO_2$ (1wt %) was developed from pallet as a source of e-beam evaporator to 6-inch size target for sputtering in order to apply for large-sized organic display devices. Water Vapor Transmission Rates (WVTR) of the deposited films were measured as a function of thickness to assess the effectiveness of this film as a passivation layer and it applied to real devices. From this study, we can confirm that the passivation layer formed by TCFs using RF sputtering method sufficiently shows the potentiality of application to passivation layer for organic display devices.