• Journal of the Ergonomics Society of Korea
• /
• v.19 no.1
• /
• pp.109-125
• /
• 2000

The purpose of this study was to provide basic data for a more functional torso's pattern by analyzing multidimensional anthropometric measurements and the wearing condition. For the functional torso's pattern drafting, the fitness state of basic torso's patterns(4 types) was compared and evaluated from the cross-sectioned overlap maps by $moir{\acute{e}}$ topography. The results were as follows: 1. According to the measurements of four patterns by using the one-dimensional measurement, the amount of ease in girth item for pattern A was the smallest. The ease of clothes was affected by the position of dart, the amount of dart, and the drafting method. 2. As the results of wearing evaluation by $moir{\acute{e}}$ topography method, pattern B had the largest space length for hip part, pattern A, C and D had the largest space length for bust part. Also, in the all measurement items, pattern A had the smallest amount of ease. The space length for bust and waist part of pattern B was smaller than pattern D, but, for abdomen and hip part of pattern B was larger than pattern D. The space length of pattern C was revealed intermediate for all measurement part. 3. The significant difference of space length of each pattern was shown in all parts except bust part(p<.05). The amount of space was affected by the amount of dart, the characteristics of the somatotype, and the drafting method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.5
• /
• pp.602-614
• /
• 1994

The purpose of this study was to suggest the proper ease of total crotch length concerning both appearance and comfort. The research processes as follows. 1) For the purpose of obtaining the necessary ease of slacks in body movement, experimental slacks of no ease of total crotch length were made. Three college girls putting on these experimental slacks were examined on their back middle waist lines using cross-cut method. 2) Experimental slacks for suggesting the proper ease consist of 7 types; slacks CO, Wl, W3, W5, W7, C3, C5. The sensory evaluation for appearance and comfort was applied to evaluate the 7 slacks. The results can be summarized as follows. 1. As the leg-movement angle increased, the vertical space increased and the horizontal space decreased. There was negative relationship between vertical and horizontal space. And as the leg.movement angle increased, the area of space increased. The shapes of space showed the amounts of space and the direction of force by the movements. 2. The appearances of slacks C3, W3, C5 were better than the other slacks. The eases of the crotch were better than those of the waist line in appearance. And slakcs W7 was better than any other , ;lacks in comfort. When the amount of each part of eases was same, the comfort in eases of crotch was not as good as that of waist line. 3. In slacks, the proper ease of total crotch length was 3% and 5% of total crotch length.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.4
• /
• pp.295-308
• /
• 2018

In this study, orbit determination (OD) simulation for the Korea Pathfinder Lunar Orbiter (KPLO) was accomplished for investigation of the observational arc-length effect using a sequential estimation algorithm. A lunar polar orbit located at 100 km altitude and $90^{\circ}$ inclination was mainly considered for the KPLO mission operation phase. For measurement simulation and OD for KPLO, the Analytical Graphics Inc. Systems Tool Kit 11 and Orbit Determination Tool Kit 6 software were utilized. Three deep-space ground stations, including two deep space network (DSN) antennas and the Korea Deep Space Antenna, were configured for the OD simulation. To investigate the arc-length effect on OD, 60-hr, 48-hr, 24-hr, and 12-hr tracking data were prepared. Position uncertainty by error covariance and orbit overlap precision were used for OD performance evaluation. Additionally, orbit prediction (OP) accuracy was also assessed by the position difference between the estimated and true orbits. Finally, we concluded that the 48-hr-based OD strategy is suitable for effective flight dynamics operation of KPLO. This work suggests a useful guideline for the OD strategy of KPLO mission planning and operation during the nominal lunar orbits phase.

• Korean Journal of Human Ecology
• /
• v.7 no.3
• /
• pp.5-13
• /
• 2004

This study was performed to investigate the characteristics of denim pants preferred by Korean women in their 20's through the analysis of the sensory test(appearance) and garment space length. Four kinds of ready-made denim pants of national and licensed brand on sale in Korea were used as the experimental garment. The results were as follows: 1. The significant difference among brands were found in the appropriateness of ease in the part of waist belt(front), knee (front), ankle(back) and the total silhouette. 2. In the analysis of garment space length. the significant difference among brands was shown in waist belt part $(FL60^{\circ})$, hip $(FL0^{\circ},\;FL30^{\circ})$, crotch(SRR) and knee(BR60^{\circ}). However, total average was not significant difference. 3. According to analysis of pattern size, the brand N was out of balance in crotch depth and girth. by which it can be said that N got the lowest score in sensory test (appearance). On the other hand, Brand GU was large in circumference with short crotch length. 4. Therefore, the most preferred denim pants pattern of Korean women in their 20's was fit in waist belt. hip. crotch circumference and a little bit tight in crotch depth and length. As the design was limited as straight style. more design and brands must be included for future study.

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.552-561
• /
• 2006

This study was conducted to suggest an appropriate jacket bodice pattern for elderly women by comparing the developed pattern with existing ready-made jacket pattern. The developed jacket bodice pattern was produced from the basic sloper in which elderly women's somatotype was fully reflected, by using the newly developed 3D pattern design system. Subjects were 6 elderly women aged from 60 to 69 who have average somatotype in their age group. This study carried out pattern analysis and self-sensory test with three ready-made jackets(national brands) and suggested a developed jacket pattern based on the results. According to the self sensory test results of ready-made jacket, wearing fitness among brands was significantly different even though those brands were same B91 size. The results of ready-made jackets' pattern analysis, size differences among patterns have influenced wearing fitness. The basic numerical formula for the jacket pattern considered elderly women's somatotype were as follows; $B/4+2{\pm}0.2{\sim}0.5$(difference of front and back), $W/4+2{\pm}0.2{\sim}0.5$(difference of front and back), H/4+2~7(ease amount), armhole depth B/4, chest width B/6+1, back width B/6+3 and back neck width B/12+0.5. According to the results of the developed jacket's appearance evaluation, it earned higher scores in silhouette and ease amount, confirming that the developed jacket is appropriate for the elderly women. Also, in the evaluation on space length, the developed jacket pattern was evaluated to allow proper space length in all around of measurement parts.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.237-246
• /
• 2021

This study aims to analyze short sleeve cycling tops from three brands for a change in garment fit and pressure depending on the static and cycling postures. To this end, it used a 3D virtual garment system to virtualize the garments. Further, a cross-section of the 3D virtual garment data was obtained, and the space length was measured in the design-X program to prove the objectivity of the 3D virtual garment. The results indicated that three brands had a large space length at the front than the back because of the bent posture in cycling. Therefore, appropriate ease was required for the waist and abdomen. Although there were various cutting lines of the bodice panel by brand, the design of the cutting lines should consider the changes in the surface to reflect the bent posture in cycling. The results of this experiment confirmed that the wrinkles present in the 3D virtual garment were reflected in the cross-section and that the space length was small in the high-stress area, as shown in red. Therefore, it was proven the stress of the 3D virtual garment could be used for 3D virtual garment evaluation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.75-90
• /
• 2015

As soil nails support a ground by the friction between nails and soils being reinforced, the length of soil nails is important factor for a ground stability. Thus, the soil nail length has to be accurately evaluated in order to secure a ground stability. The goal of this study is to suggest the applicability of the non-destructive method as the basic research for the evaluation of the soil nail length. First, the elastic and electromagnetic waves are adopted to select an applicable method for the soil nails connected by the coupler. Test results show that while the ultrasonic waves are not detected due to the coupler, the electromagnetic waves are free for the influence of the coupler. Second, electromagnetic waves are measured for combined soil nails with the length of 1 m~15 m for the investigation of the characteristics of electromagnetic waves. The travel time of the electromagnetic wave increases with an increase in the soil nail length. In addition, the ground cable is used to apply the electromagnetic waves to pre-installed soil nails. Test results show that the travel time of the electromagnetic wave by using the ground cable increases with an increase in soil nail length. This study demonstrates that the electromagnetic wave may be a promising method for the evaluation of the soil nail length.

• The Journal of the Korean dental association
• /
• v.18 no.8 s.137
• /
• pp.639-644
• /
• 1980

In cases with maxillary lateral incisor missing, the problems were usually treated by the choice between space opening for prosthetic lateral incisor replacement and space closure with cuspid sub stitution for the alteral insicors. The decision of the choice could be perplexing in evaluation of the individual case. Therefore, various diagnostic criteria, such as occlusion, dental esthetics, canine position and inclination, tooth size relationship, maxillary lip length, and skeletal relation had to be evaluated. On the basis of this diagnostic information, the treatment planning could be established. A case was shown to illustrate the treatment of patient with congenitally maxillary lateral incisor missing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.144-149
• /
• 2014

A ground firing test for hot-fire performance evaluation according to the characteristic length($L^*$) variation of thrust chamber was carried out for the hydrazine thruster which may be employed in space launch vehicles. A scrutiny into the performance characteristics of each thruster is made in terms of thrust, specific impulse, response characteristics, and characteristic velocity at steady-state firing mode with propellant inlet pressure of 2.41 MPa (350 psia). Through the test results, it has been verified that performance of characteristic velocity and specific impulse degrades as the characteristic length deviates from that of the standard model. Thus, it is confirmed that the thrust chamber configuration of standard model was suitably designed for the requirement specified.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.176-182
• /
• 2018

The purpose of this study was to investigate the safety and rationality of buckling strength and length coefficient by comparing with the design standards of domestic and foreign compression materials based on the buckling test results of circular steel pipe with ball joints. The types of round steel pipes selected for buckling performance evaluation were ø$48.6{\times}2.8t$, ø$60.5{\times}3.2t$ and ø$76.3{\times}3.2t$. For the design of domestic and foreign compression materials, Korea 's Load Resistance and Factor Design, Japan' s Limit State Design, and British Standard BS5950 standard were applied. In this study, we compared and analyzed the buckling performance between the experimental results of the previous research and the domestic and foreign design standards. The results were summarized as follows. As a result of applying the full length of the member to the buckling length in the compression materials design standards of each country, it was 64-89% of the buckling strength by the experiment. Therefore, it is deemed desirable to perform the member design according to the current design standard formula for safety. Experimental results show that the measured buckling strength was 1.02-1.43 times higher than the buckling strength of pure cylindrical steel tubes in the design standards of Korea, Japan and the United Kingdom compression materials. Consequently, it seemed that the buckling strength of individual member in the design of space frame structure should be considered buckling coefficient as the length of pure round steel pipe rather than the length of inter-node.