• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.169-178
• /
• 2019

Due to the characteristics of an ad hoc network without a control center, self-organization, and flexible topology, the trust evaluation of the nodes in the network is extremely difficult. Based on the analysis of ad hoc networks and the blockchain technology, a blockchain-based node-level trust evaluation model is proposed. The concepts of the node trust degree of the HASH list on the blockchain and the perfect reward and punishment mechanism are adopted to construct the node trust evaluation model of the ad hoc network. According to the needs of different applications the network security level can be dynamically adjusted through changes in the trust threshold. The simulation experiments demonstrate that ad-hoc on-demand distance vector(AODV) Routing protocol based on this model of multicast-AODV(MAODV) routing protocol shows a significant improvement in security compared with the traditional AODV and on-demand multipath distance vector(AOMDV) routing protocols.

• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.26.1-26.9
• /
• 2016

Objectives Korea's Act on the Registration and Evaluation of Chemicals (K-REACH) was enacted for the protection of human health and the environment in 2015. Considering that about 2000 new substances are introduced annually across the globe, the extent of animal testing requirement could be overwhelming unless regulators and companies work proactively to institute and enforce global best practices to replace, reduce or refine animal use. In this review, the way to reduce the animal use for K-REACH is discussed. Methods Background of the enforcement of the K-REACH and its details was reviewed along with the papers and regulatory documents regarding the limitation of animal experiments and its alternatives in order to discuss the regulatory adoption of alternative tests. Results Depending on the tonnage of the chemical used, the data required ranges from acute and other short-term studies for a single exposure route to testing via multiple exposure routes and costly, longer-term studies such as a full two-generation reproducibility toxicity. The European Registration, Evaluation, Authorization and Restriction of Chemicals regulation provides for mandatory sharing of vertebrate test data to avoid unnecessary duplication of animal use and test costs, and obligation to revise data requirements and test guidelines "as soon as possible" after relevant, validated replacement, reduction or refinement (3R) methods become available. Furthermore, the Organization for Economic Cooperation and Development actively accepts alternative animal tests and 3R to chemical toxicity tests. Conclusions Alternative tests which are more ethical and efficient than animal experiments should be widely used to assess the toxicity of chemicals for K-REACH registration. The relevant regulatory agencies will have to make efforts to actively adopt and uptake new alternative tests and 3R to K-REACH.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.795-801
• /
• 2012

This paper describes theoretical approach methodology for the Probability based risk Evaluation Techniques (PET) to monitor the risk levels of small-sized sea floater as like a yacht pier. The risk decision-making process by risk criteria with five-step scales is the core concepts of PET. These five-step scales are calculated from cumulative probability distribution of response functions for the sea floater motions using closed-form expressions. In addition, The risk decision-making process of PET with the risk criteria is proposed in this work. To verify the usability of PET, simulation experiments are carried out using mimic signals with the electrical specifications of ADIS16405 sensor that is to be use as measurement tool for the floater motions. As results from experiments, the risk evaluation error by PET shows 0.38 levels in maximum 5.0 levels. These results clearly shown that the proposed PET can be use as the monitoring techniques.

• Journal of Korea Water Resources Association
• /
• v.38 no.8 s.157
• /
• pp.631-643
• /
• 2005

The objective of this study is to perform hydraulic and numerical model experiments of the flows in circulation-water-pump(CWP) chambers of combined cycle power plants (CCPP) to be built and to suggest improvement plans if the flows might cause a serious problem on the operation of CWPs. Hydraulic model was constructed in a scale of 1 to 20 using acrylic sheets and a two dimensional numerical model used was RMA2. To evaluate results of Hydraulic and numerical model experiments, evaluation criteria of flow conditions in the intake canal and CWP chambers were determined. Vertical vorticities obtained from numerical simulations for the initial plan of CCPPs were qualitatively compared with results of hydraulic model experiments and the formation possibility of a large scale vortex, one of the flow evaluation criteria, was evaluated. The initial plan was found not to satisfy the flow evaluation. Nine improvement plans were devised and numerically simulated. Four alternative plans among nine improvement plans were selected and hydraulically experimented. On the ground of the results of hydraulic model experiments, a final improvement plan, one of four improvement plants, was suggested. When CWP chambers and intake canals were designed with spatial constraints, flow separating wall and guide walls were found to improve flow conditions in CWP chambers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1091-1099
• /
• 2001

Evaluation on jean products were varied although they were the identical jeans. Therefore, we could confirm the bias by price. brand, and store when consumer evaluating jean products. The various consumer characteristics also provided effects evaluation on jean products. An evaluation on jean products is very subjective and the degrees depending on these three cues could be varied by consumer's characteristics. For empirical study, experiments by the subjects among students of ewha womans university were done by using jeans as stimulus. Data was collected by a questionnaire made up by a researcher based on the theoretical and pretest. Data was analyzed by ANOVA, factor analysis, grouping analysis, F-test, and etc. 571 data were analysed out of the 600 data. Cues such as price, brand, and store affected significantly the evaluation of jeans. The most important cue of all three was store, then price, and then brand. These three cues affected the evaluation of jean products separately and together. The result of the study was that the consumers characteristics mediated the effects of extrinsic cues like price, brand, and store on jean products evaluation. Consumer's characteristics like prior knowledge and shopping orientation mediated the effects of price, and store cue on jean products evaluation.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.4
• /
• pp.253-262
• /
• 2020

This study provides a comparative analysis of experiments-based enhancements and sensitivity evaluations for the structural design of an automatic ocean salt collector under various load conditions. The sizing variables of the structural members were considered as design factors. The strength and weight performances were selected as output responses. The design of experiments used in the comparative study consisted of the orthogonal array design, Box-Behnken design, and central composite design. The response surface model, one of the metamodels, was applied to the approximate model generation. The design enhancement performance metrics, including numerical costs and weight minimization, according to the design of experiments, were compared from the best design case results. The central composite design method showed the most enhanced design results for the structural design of the automatic ocean salt collector.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.322-327
• /
• 2023

A design of experiments was evaluated in optimizing MOF-5 synthesis for acetylene adsorption. At first, mixture design was used to optimize precursor concentration, terephthalic acid, zinc acetate dihydrate and N,N-dimethylformamide. More specifically, 13 conditions with various molar ratios were designed by extreme vertices design method. After preparing the samples, XRD, N₂ physisorption and SEM analysis were performed for their characterization. Moreover, acetylene adsorption experiments were carried out over the samples under identical conditions. The optimal precursor composition for MOF-5 synthesis was predicted on a molar basis as follows: terephthalic acid : acetate dihydrate : dimethylformamide = 0.1 : 0.4 : 0.5. Thereafter, multi-level factorial design was designated to investigate the effect of synthesis reaction conditions such as temperature, time and stirring speed. By the statistical analysis of 18 samples designed, 4 reaction parameters were determined for additional adsorption experiments. Therefore, MOF-5 prepared under the synthesis time and temperature of 100 ℃ and 12 h, respectively, showed the maximum adsorption capacity of 15.1 mmol/g.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.359-366
• /
• 1995

The parameter, B/A, quantifies nonlinearity of the pressure-density relationship of propagation medium. This study investigated quantitative evaluation technique for healing fractured bones using this ultrasonic nonlinear parameter, B/A, obtained by the second harmonic amplitude method. A series of fundamental experiments were performed on cylinder phantoms made of aluminium, which demonstrated potential capability of nonlinear parameter B/A in the diagnosis of healing fractured bones using ultrasound.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.7 no.1
• /
• pp.18-31
• /
• 1987

For the purpose of domestic production of ultrasonic transducer, experiments on material selection for backing and matching layer, and electrical impedance matching between transducer and equipment were performed. The characteristics of manufactured transducers with experimental results were analyzed and compared with foreign products. Through the evaluation of the transducers manufactured and the comparision with foreign products, it is confirmed that the transducers manufactured show the good performance characteristics and efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.816-819
• /
• 1996

This paper focuses on development of simulation model for SAE J1850 and performance evaluation of a J1850 network. The simulation model has been developed by using discrete event simulation language. SAE J1850 is one of Class B network protocol for general data sharing applications. Through numerous simulation experiments, several important performance factors such as the probability of a successful transmission, average queue delay, and throughput have been evaluated.