• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.61-69
• /
• 2019

Poly(ethylene-co-vinyl acetate) (EVA) is a copolymer of ethylene and vinyl acetate (VA). It is important to determine the VA content of EVA, since the properties of EVA depend highly on the VA content. EVA copolymers have been used in a wide range of applications appropriate for the different VA contents. IR, NMR, and TGA are generally used for determination of the VA content of EVA copolymers. Of these, TGA is the most reliable method and can be applied to cured EVAs. Analytical methods for determination of the VA content and properties of EVA copolymers via TGA were herein reviewed. Thermal behaviors of EVA copolymers (glass transition temperature ($T_g$), melting point ($T_m$), and crystallization temperature ($T_c$)) determined by DSC were also reviewed. Analysis of the related literature revealed that the $T_g$, $T_m$, and $T_c$ decrease by about 0.46, 1.36, and $2.08^{\circ}C$, respectively, for every 1 wt% in VA content. A method for determining the degree of crosslinking of cured EVA copolymers was also reviewed, and the degree of crosslinking tends to increase with the decrease in the VA content.

• Elastomers and Composites
• /
• v.50 no.1
• /
• pp.18-23
• /
• 2015

Vinyl acetate (VA) contents of poly(ethylene-co-vinyl acetate) (EVA) analyzed by infrared spectroscopy (IR), nuclear magnetic spectroscopy (NMR), and thermogravimetric analysis (TGA) were compared. Four grade EVAs supplied by Aldrich Co. and four grade EVAs manufactured by DuPont Co. were used. For IR analysis, VA contents were determined using calibration curve (absorbance ratio of $1739cm^{-1}/2922cm^{-1}$ or $609cm^{-1}/1464cm^{-1}$) of reference EVAs. Correlation coefficients of the calibration curves were not sufficiently high ($r^2{\leq}0.96$). For NMR analysis, VA contents were determined using peaks of $CH_3$, $CH_2$, and CH. VA contents determined by NMR analysis were less than those marked by suppliers more than 10%. For TGA, VA contents were determined using weight loss through deacetylation. VA contents determined by TGA were slightly different with those marked by suppliers. Difference in the VA contents determined by different analytical methods was discussed, and difference in the analytical results according to the EVA suppliers was also examined.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.230.1-230.1
• /
• 2003

In case of oral application of quinupramine, antidepressants, it may cause adverse effects such as diarrhea, nausea due to transient high blood concentration. Ethylene vinyl acetate (EVA) which is heat-processible, flexible, inexpensive material was used for transdermal drug delivery. The purpose of this study was to develop the new transdermal delivery system of quinupramine using EVA polymer matrix that can provide sustained release and avoid the side effects. The EVA matrix containing quinupramine was prepared by solvent-evaporation method. (omitted)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.115-119
• /
• 1995

Electrical conduction characteristics of Polyethylene/Ethylene vinyl acetate blends of varing vinyl acetate content(1% and 4%) were investigated at electric fields ranging from 10$\^$6/ to 10.$\^$8/ V/cm over the temperature range of 30 and 85$^{\circ}C$. It was obser-ved that the extent of current density was changed at the blends and the rate of change of current den-sity was slightly suppressed at high field range, but PE and EVA were not shown. The change of con-duction characteristics and a suppression in rate of change of current density were attributed to the VA content in PE.EVA blends.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.6
• /
• pp.347-354
• /
• 2011

Repeated oral administration of loxoprofen can induce many side effects such as gastric disturbances and acidosis. Therefore, we considered alternative routes of administration for loxoprofen to avoid such adverse effects. The aim of this study was to develop an ethylene-vinyl acetate (EVA) matrix system containing a permeation enhancer for enhanced transdermal delivery of loxoprofen. The EVA matrix containing loxoprofen was fabricated and the effects of drug concentration, temperature, enhancer and plasticizer on drug release were studied from the loxoprofen-EVA matrix. The solubility of loxoprofen was highest at 40% (v/v) PEG 400. The release rate of drug from drug-EVA matrix increased with increased loading dose and temperature. The release rate was proportional to the square root of loading dose. The activation energy (Ea), which was measured from the slope of log P versus 1000/T, was 5.67 kcal/mol for a 2.0% loaded drug dose from the EVA matrix. Among the plasticizer used, diethyl phthalate showed the highest release rate of loxoprofen. Among the enhancers used, polyoxyethylene 2-oleyl ether showed the greatest enhancing effect. In conclusion, for the enhanced controlled transdermal delivery of loxoprofen, the application of the EVA matrix containing plasticizer and penetration enhancer could be useful in the development of a controlled drug delivery system.

• Elastomers and Composites
• /
• v.54 no.2
• /
• pp.118-122
• /
• 2019

Four different polymer compounds were manufactured to make cable sheaths for the shipping industry. Two kinds of ethylene vinyl acetate (EVA) as the main matrix polymers and EVA-grafted maleic anhydride (EVA-g-MAH) as the coupling agent were selected for compounding with fire retardant, crosslinking agent, filler, plasticizer, and other additives. The properties of the four compounded materials were investigated with different contents of the fire retardant, silanecoated magnesium dihydroxide (S-MDH). In the rheology evaluation, the $t_{60}$ and ${\Delta}T$ values increased with increasing S-MDH contents. On the other hand, the tensile strength decreased with increasing S-MDH content due to a relative decrease in binder polymers. With increasing S-MDH content, fire resistance increased, but cold resistance showed no obvious enhancement due to the polar effect of vinyl acetate in EVA.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.220-224
• /
• 2019

Herein, three polymer compounds were manufactured using three polymer combination methods, ethylene-vinyl acetate/ethylene-propylene-diene-copolymer (EPDM), ethylene-vinyl acetate (EVA)/polyethylene-A (PE-A; density: 0.870), and ethylene-vinyl acetate (EVA)/polyethylene-B (PE-B; density: 0.885), for making cable sheath for use in the shipping industry. In this study, EVA, EPDM, PE-A, and PE-B were used as matrix polymers, and EVA-grafted maleic anhydride was used as a coupling agent for compounding with various compounds such as a fire retardant, cross-linking agent, filler, and other additives, besides the plasticizer. ${\Delta}T$, Mooney viscosity, and tensile strength increased in order of EPDM < PE-A < PE-B, the probable reason is due to the different crosslinking effect. The three compounds showed similar results for fire resistance and aging resistance after compounding process, but they showed excellent cold resistance owing to the non-polarity of the polymers and sufficient plasticizer content.

• Elastomers and Composites
• /
• v.51 no.1
• /
• pp.63-67
• /
• 2016

Poly(ethylene-co-vinyl acetate) (EVA) was pyrolyzed to eliminate acetic acid of VA unit using off-line pyrolysis, and the deacetylated EVA was analyzed infrared spectroscopy (IR) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). EVA film for deacetylation was prepared by solution casting on aluminum foil and it was pyrolyzed at low temperature of $300^{\circ}C$ in the off-line pyrolysis apparatus. After deacetylation, carbon-carbon double bond (C=C) was formed by 1,2-elimination of the VA unit in the EVA backbone. Most of C=C bonds were trans-1,4-unit and 1,2-unit was also observed. Presence of the 1,2-unit in deacetylated EVA indicates that terminal or branch VA units exist in the raw EVA. Py-GC/MS chromatogram of deacetylated EVA displayed much smaller acetic acid and much more abundant other pyrolysis products than that of raw EVA, which means that the pyrolysis efficiency and separation condition were improved.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1422-1424
• /
• 2002

EVA-OH (Ethylene-vinyl acetate-vinyl alchol terpolymers) were prepared by using the transesterification reaction between ethylene-vinyl acetate copolymer and alchol. Structural and thermal analyses were accomplished with FTIR and DSC. Space charge behaviors of EVA-OH were investigated using PEA method. Electrical conduction currents were also measured. As the increase of conversion rate, melting point increased and we could observe changes in space charge distributions and the increase of electrical conduction currents of EVA-OH.

• Membrane Journal
• /
• v.20 no.4
• /
• pp.290-296
• /
• 2010

Ethylene vinyl acetate (EVA-28)/Co-Al LDH nanocomposite membranes were prepared by solution intercalation using organically modified LDH. LDH was made organophilic by the intercalation of dodecyl sulfate (DS) anion in the interlayer. The prepared membranes were characterized using XRD, FT-IR and SEM. Gas permeability of EVA/LDH nanocomposite membranes with LDH content of 1, 3, and 5 w% was studied for $O_2$ and $CO_2$ at pressure of 3, 4, and 5 bar. The permeability of $O_2$ and $CO_2$ was minimum for nanocomposite membrane with 1 wt% LDH and increased with increasing LDH content, which is presumably due to aggregation of LDH filler. The selectivity of $CO_2$ for $O_2$ showed the maximum value at 1 wt% of LDH content and decreased thereafter.